RHS36 36 Grit 2-3/4-Inch x 27 Meters, Gold PSA Rolls Stearated Aluminum Oxide

Great big roll of sandpaper should last forever in a really sounds great and it sticks good too

I’m refinishing my coupe and needed two of these to finish for primer! I’ll order more in different grits to complete projects!

This sandpaper is not terrible but I would not give it 5 stars. I am comparing it to Norton 3x, which I absolutely love, so my rating reflects how good it is to the Norton brand which I would rate a 5. It is not quite as sharp as Norton and definitely does not last as long. The adhesive backing is not very sticky and comes loose very quickly. It starts curling up at the edges and then as sawdust creeps in and under the edges it then works it's way off shortly thereafter. Good if you are on a budget but it becomes frustrating to use after a while. Tried it once but going back to Norton.

This stuff is fantastic. The first thing I tried it on was an antique plane iron I've been flogging the chips out of for years. Using an angle holding guide and ONE 16" strip on safety glass took 1/8" off a 1.5" iron in less than 100 strokes. I then had about 30 passes with a different iron and still had enough life to take 80 grit marks out of a 3/4x30" surface of spanish cedar. It didn't clog til I tried white pine (same strip), but what wouldn't?PSA did well even on cold, semi-clean surfaces. I sound like one of those joke reviews, but I honestly did not know sandpaper could be this good. There are very occasional paper separations on removal, but I bet the 3M does that too at almost 300% of the cost.

The sandpaper grit is accurate and the adhesive backing makes in very simple to stick it on and peel it off my fairing boards or sanding blocks, although it can sometimes stick just a little bit to the board or block. But this is definite the way to go if sanding large areas were custom lengths of sandpaper are key. I am building a 9 foot wood surfboard, which requires long and even sanding strokes, so stick this on fair boards that are as wide as the paper and about 2 feet long. For the price, this is a terrific value.

I'm a fan of the Karebac brand from an abrasives perspective - it holds up well to heavy use against things like steel, and doesn't clog very easily at all. The *only* issue (and I do mean *only* issue) I have with it is the adhesive - it's too strong, so when you try to peel the strip off, the paper tears. This makes switching out strips very cumbersome and time-consuming. Unfortunately, this is a deal-breaker for me, as I use PSA abrasives in a production environment, and time is a huge factor for me.

I agree with other reviewers that this is an excellent paper at an attractive price, but I've had the same problem as others with the paper adhering too strongly to my sanding block. However, I solved this by applying a light coat of wax to the block. The paper still adheres adequately, but peels off cleanly. I use an automotive cleaner/wax (sparingly, then buff lightly) and repeat occasionally as needed. It threw me at first that the grit is not printed on the back of the sandpaper, but apparently the letters DV indicate 120 grit, and EV is 220. Check the markings on the back when you open the package to make certain.

Quality sandpaper for my use. I use primarily on wood, so I can't speak to metal. The paper thickness and adhesive doesn't seem to be consistent between rolls/grits. The surface itself is pretty good though. It's not as good as the 3M gold paper, but cuts at least as well as the 3M red paper for me and costs a bit less.

Used this on a pneumatic sanding tool to smooth the surface on a DIY boat build. Perfect for wood however it tends to gum up when used on non waxed polyester resin which cures a bit tacky. Wet/dry sandpaper is best for sanding polyester resin.

I am really glad I chose this brand of sandpaper, I redo a lot of old furniture and I always buy 60-80 grit sandpaper but it usually takes me a long time to sand them down to their natural wood, and this sandpaper gets it down to where I need it in no time at all, I don’t even have to use my sander, just hand sanding is easy enough with this stuff. This will be my new go to sandpaper for sure.

I bought this based on the good reviews, and it has thoroughly let me down. I'm doing bodywork on a car, using premium 2k products, so there should be no issues with sanding. This sand paper clogs almost instantly with high build primer or body filler. I simply can't use this sandpaper on this project for block sanding. Maybe it would be better on wood? I don't know.... but now I'm stuck with 3 rolls of this stuff. Do not buy this stuff for bodywork... get some Norton or 3M.

Works good... lasts well.could use more adhesive wants to slide off the sanding block if your not careful .but I would buy it again

I wasn’t expecting the quality for the price. Will be ordering more. This is equal to well known brands for half the price.