The HELIOS heated bed is a sleek PCB based 3D printing platform that uses copper traces as the heating element. It is commonly used to prevent layer warping when printing ABS or PLA. It has the same hole patterns as the popular Prusa PCB Bed (209mm x 209mm) making it a drop in replacement for 200mm x 200mm build area beds. The overall dimensions has been increased to provide more space for the mounting holes and widen the power tracks supplying the traces. The PCB is 1/8" thick (2x that of regular heat beds) to minimize warping and provide rigidity to allow mounting flexibility. -(1/8) Thick TG-170 FR4 PCB Material, RoHS -Fast heating, Top Facing PCB traces -Drop-in replacement for Prusa Heated Bed -Screw Mounted Wire Terminals -Comes with Ceramic Bottom Insulator and Mounting Hardware -Built-in pads and traces for thermistor -Power indicator LED soldered -Countersunk screw holes for a completely flat top Power Requirements: Make sure you have at least 12 Amps of spare from your power supply to power the Helios Heated bed. During cold starts the bed can draw a lot of power then taper as it gets hot. The recommended wire size is 12 to 14AWG, you can use 16AWG for shorter wire runs. Package Contents: Helios Heated bed 200mm x 200mm build area [LED soldered] Mounting Hardware [4 screws, 4 flat & 4 lock washers, 4 nuts, 2 wire terminals] 32" of woven ceramic strip insulator with adhesive.
Trustpilot
2 weeks ago
1 week ago
