2K Epoxy Primer Beige | 2K Primer Automotive | Epoxy Spray Paint for Metal, Aluminum & Steel | Corrosion-Resistant, Fast-Drying, High Adhesion & Professional Grade 12.7 oz

As the home classic car hobbyist I wouldn't use anything else. This is a 2k epoxy primer for bare (clean) metal. I will never use regular rattle can primer again (for bare metal), The final black coat in the pictures is the same brand in Hot Rod Satin Black. Also a 2K product. It is expensive though (but worth it to get professional results) . This product is for the average Joe that doesn't have a compressor, paint guns, cleaning supplies, etc.

This is great product. Get shop like finish, durable, hard like car paint. Need to apply in well ventilated place or wear a good respirator

I had to prime my gas tank shield and after a brief scuffing of the shield, and after a thorough cleaning of the shield with acetone, this primer went on quick and easy. It does take a while to properly prep the can (shake can for 1 min, remove red plunger from cap and insert into bottom of can to release mixing chemical and shake for another 2 minutes). At this point, however, I cant say for sure how well it'll hold up. This will require a second review a year or 2 from now

It works, have nothing but great things to say about this product. Did not explode on me, left it out in 80 degree weather and dropped a few times. Got it on my fingers and it washed right off, sprayed out evenly. Just sprayed down some open rust spots on my truck, and water droplets were sitting on top of the primer after is rained. It really works for a great price, nothing else like it around. Also warning, it takes about 1-2 days before it can be sanded so be patient.

I've been using this paint, along with their 2K Hot Rod Black paint on chrome grills and vehicle emblems for years. It is permanent! I do have issues with the consistency of the spray flow, however. Nice wide fan for sure, but it likes to stop and restart spraying at times. I've been able to work through it, just a hassle. You should also know that once you pop the activator, the paint is only good for a day or two.

Perfect protective layer for a fresh paint. Easy to use and great value

I needed to prime four 15" wheels so I bought two cans. One can was exactly enough. It sprays and covers very well. I sprayed the wheels the next day with single stage acrylic enamel and they turn our perfect. It is pricey but I am very pleased with this product and would buy it again after I use the second can I now have.

This seems like a very tough primer and is very easy to use. Unlike many spray cans, this comes with a good nozzle that sprays a fan pattern. I recommend sanding bare metal to 320 grit before priming, but I think this primer would probably do OK if you only sand to 220 grit.

Great primer. Sprays well and good coverage. After activated was still able to spray remaining contents after 4 days stored at 68 F . The mixing button on bottom requires quite a bit of force to activate, but you can hear it when it releases. Great for small jobs, will buy again.

Its quality is ok but it is not worth for the price.

Product finally arrived as promised! Thanks Amazon.....The can of 2k primer in the nick of time for a project planned months ago..The only reason it isn't rated higher is because of the delay ,and the lack of any packaging material around the can in the 10 by 22 inch box resulted in the can bouncing around and discharging it's contents into the box. So one star for making it to my back doorstep .....