Two-Part Epoxy Floor Paint | 1.06 Gal | 4:1 Mix Ratio | Low VOC, Floor Coating for Garage & Basement | Anti-Slip, Chemical Resistant, 4H Hardness | Self-Leveling High-Gloss Finish for 270 Sq.Ft Per Coat

Easy to apply good finish

This product is not a full gallon as advertisted. In addition the packaging has much to be desired. It is messy opening plastic bags and squeezing the contents into the bucket.

Great product I definitely recommend It,

This turned out really beautiful! I did two coats. Each gallon covered 300 sq ft easily with a little to spare even. One direction for the first coat. Perpendicular direction for the second coat. Very shiny and really improved the room. Included before and after photos. There are tiny holes in my concrete I was hoping it would fill completely but it didn’t. But they aren’t super noticeable unless you bend down and examine the floor. Update day 6: moved my washer and dryer in using dolly. Gently scooted into place and floor scuffed. Not sure if I should wait longer for cure… or look into top coat.

I used this 1.06‑gallon two part epoxy on my garage floor to paint an area that is about 250 sq ft. It did a nice job and the floor looks great afterwards. I like the silver gray color and the high gloss finish. It looks sharp. The mixing time was workable. The 4 to 1 ratio was easy to measure using a small measuring cup. The coverage was about what the label said. I applied this in thin even coats. After curing it feels hard and definitely resistant to any oil, dirt or soil penetrating it. I prepped the surface prior to applying and used a concrete cleaner prior to painting. The epoxy bonded to the floor quite well. In one particular spot I did have some peeling about a week after, but that was because it was deeply soiled with oil and needed to have it prepped better before applying. I mixed the epoxy and resin thoroughly for the recommended time and used a good quality roller with a 3/8" nap. I worked in small sections. It was warm the day I painted so it dried quite quickly. This kit is for a small size area. If you plan on using two coats or for a larger area you’ll need to order several of these epoxy floor kits to be able to do the job. Other than that it's great to use, just make sure you prep the floor well and apply in even coats when you are doing it. I would do this on a windy day with the garage door open if there is any chance of leaves or debris blowing in on the freshly painted floor before it cures well.

It looked really great to begin with. I gave it the week it needed to fully cure, and then went to move everything back in with floor protectors. Quality is not amazing. One of the floor protectors slipped out just barely for a second and it got scratched very easily. Application was easy though.

Upgrading a workspace layout with this two-part epoxy floor paint makes a massive difference in cleanliness and durability. The 4:1 mix ratio blends together smoothly, and the low VOC formula keeps the application process entirely manageable without overwhelming odors. It goes on evenly, curing into a hard, glossy, and professional-looking shield that resists scuffs, oil stains, and heavy equipment traffic beautifully. It delivers exceptional protection and structural longevity for high-use garage or workshop floors.

I didn't get a chance to use it because it was a sloppy mess inside the bucket when I opened it. I hope they decide to use a different material for both epoxy parts in the future. Side note, the bucket is much smaller than depicted - Caulk tube for scale. Returning it.