Swpeet 580Pcs 2.8MM Automotive Electrical Wire Connectors Kit, 2.8mm 2 3 4 6 9 Pin Automotive Electrical Wire Connectors Pin Header Crimp Wire Terminals

If you are like me I can't stand when I add a new component and the wires the manufacturer gives are too long and lose just hanging all over the place. These plugs all you to shorten those wires and put them into a loom keeping to projects neet and tidy. Cleaning up your projects and making it easy to connect and reconnect as needed. These plugs are super easy to create, make sure you measure 5 times before you perminatly cut to length needed. Crimping the ends on can be tricky and the only tip I can give is to use a small pair of players(like a small extra long needle nose plyers ) used for hobby work. These will allow you to push each side of the terminals in place one at a time. This will make sure you get a good position of the terminal on the wire befor you use a pair of crimper to get that final perminatr hold on the wire. When crimping the ends make sure you are aware of how the crimped ens is making sure you do not flatten the crimped end too much because it will not fit into the plug. I recommend using a circular crimper because it will tighten the ends so your wires will pull out with out smoshing the the end too much. You always want to preform a tug test before you push the ends into the plug. This will insure you have a tight connection befor you insert and it will not come off when inserted.Now one last tip if you get finished and put the ends into the plug and for some reason you find your self needing to remove the pin, because you have them in the wrong position, or you can't get the plug in through a hole, or you pulled a wire out of the terminal, you need to make sure you have a key for the safe and easy remove as to not damage the plug.This can be accomplished several ways. The first is to purchase a set of pin removal keys, here are hundred of them on Amazon just make sure you get one in a set that will work for these plugs. The second way is to find a small jewelers flat head screwdriver, test it on a blank end making sure it will fit into the keyway to unlock the clip on the end of the terminal. You may also loom at an unused terminal to get formiloure with what needs to take place and dry run on how push in the lock so you do not get frustrated (IT HAPPENS ALOT). The third way is to make your owne, by reprising a old or broken screwdriver, pick, or scrap, working it down to the size you needYou may find all of the parts above on Amazon it just may take some searching.I hope this helps you make your decision easier...

Decent quality, Good compatibility with OEM connectors. Worth price paid.

These are perfect for building your own plugs for wiring and things that are meant for certain things you can match it up and by creating your own clothes, which is very nice send you a bunch of DYII or custom builds in these are very much needed. Will purchase again.

I have ordered the $60 version of this online before, and honestly cannot tell the difference between it and this $20 set. I would definitely recommend it if you need new connectors for your old Japanese car/motorcycle. Pay the money for a good tool to install these, but save a lot of money on the connecters and get these.

Looks good hope it work for me haven't got around to using it yet

Easy and simple, These worked out great for making a wiring harness for your cars lights. Easy to use. Nice and neat. Not water proof but great for under the dash and dry areas.

I used this to wire up a keyless entry system for my car and this kit was fantastic! This was my first time tackling a wiring project and making a wiring harness and this kit make me feel pro.Super easy to use and pin, and offered so many different options for what I wanted to do. The plastic feels sturdy and snaps and unsnaps with confidence, I'm not worried about those at all.The only downfall of this kit is the metal pins. They work and will hold a solid connections, but you must be very delicate with them, as they will bend and snap easy if you put too much pressure when crimping them. They're just very thin and fine metal. They worked for what I was doing, but I am cautious in how I handle them.Overall this is a great kit, and I would definitely recommend buying it if you've got a fun wiring project you wanna tackle but don't wanna break the bank doing it

I needed to find a way to make it easy for me to unhook my side lights on my (motorcycle) fairings when removing them and the 2-pin connector in this box helped. I was going to use the larger connector to replace the 9-pin connector on my bike as well, but didn't need to. As long as you have some basic knowledge with electrical components, soldering, take your time, this kit is lightweight and easy to use.