NEEWER 24x24 inch/60x60 Cm Photo Studio Shooting Tent Light Cube Diffusion

For less than twenty bucks I got just what was described. A 24"x24" photo studio cube in white, with four sheets that Velcro to the back and sides of the cube to change up the backdrop color, or move it to other sides. The included items came in the black nylon case shown in the product description photo. I will be using this cube to take product photos, and I think it will be great for this purpose. I have purchased lighting: StudioPRO 2 Light Photography Table Top Photo Studio Lighting Kit to use with this cube. I'm pleased with the item. It's as described, and the backdrop colors are as expected. It has a door that allows for me to slip my camera through, but not let external light in when I take my shots. Yes, it does take some time to get the wrinkles out, but I suggest when you get it you open it up (be careful as it can smack you in the face when it first opens) and let the wrinkles work themselves out. You may need to iron the backdrops prior to use. The 24"x24" size is ideal for me and seems even larger. I'm glad I didn't get the 30" size I had originally considered as for my needs it would have been way too big. This is perfect for use with my Ravelli APLT2 50" Light Weight Aluminum Tripod with Bag on a table top, which is what I was hoping for when I made the purchase. One issue: the slit for the camera in the front of the tent cannot be closed around the camera, which does let in some light. Not a huge issue for me, however it would be better with a zipper on it to allow the user to close around the camera lens. Overall, I recommend it as it does the trick and is priced right.

32"x32" doesn't sound that big, but it is. This is way bigger than I expected, but that's a good thing, since it just means it's a lot more versatile and I can fit more things into it than I had originally intended. I bought this to take photos of items I'd be selling online, and I have to say my items certainly stood out as being way more professional than many of the other listings. I can't be sure, but I'm fairly certain that caused my items to sell for more money than similar items with not-so-great photos from their phones or tablets. I set this up using three Canon/YN 600EX-RT speedlites (to the left, right, and behind), but it would probably be a lot easier to shoot with continuous lights for this type of pop-up light tent. Once you get the light adjusted, it doesn't get any easier. Just position your item, take a few snaps, and move on to the next item. It sets up super fast, and you'll have very high quality images as well. It pops out in seconds and folds back up to a very compact size that disguises just how large it is. The only thing I don't like, is I wish it included instructions. There are all sorts of velcro tabs and little hanging loops inside the box that I really have no idea what they're for. I know they're useful for something, just not exactly what. A few of them are for hanging the backdrops, that's easy enough to figure out, but there are multiple others that just seem a bit random. I'm guessing they could be used for suspending products such as jewelry or hanging additional backgrounds in the box, beyond what is supplied. Either way, this is a great value and I love it.

This light tent works really well for what it is designed to do. It creates a soft, even light that is perfect for product photography and small item shoots. The size is large enough to handle most objects comfortably without taking up too much space on a desk or tabletop. It is lightweight, easy to set up, and provides a professional look to photos once you get your lighting adjusted correctly. The included backgrounds are a nice addition, though they come very wrinkled straight out of the package. I recommend washing, steaming, or lightly ironing them before use to get a smooth, professional backdrop. Once prepared, they look great, and the color variety makes it easy to match different products or themes. The only real downside is folding it back up after use. It takes some practice to collapse it neatly into its original carrying shape. The material is flexible and sturdy enough to last, but it does not fold intuitively. With a little patience and care, it stores compactly and remains an excellent addition to a small home studio or e-commerce setup.

I love this thing. The price is right and it folds down super small into a nice zip up round bag. There is no built in lighting but i have some hot shoe mounted LED lights that I just lay on top of the box which work better than you would think.. I wish that the backdrop cloths were slightly larger and slightly wrapped around the corners. Depending on what I'm shooting you can catch those backdrop edges or transition areas. Well worth the money. One more thing. You will want to iron your backdrops as they come pretty wrinkled. They iron out nicely.

I am generally a fan of Neewer but this did not seem up to their usual quality. It works well but doesn't stay open without clamping it open. There is a newer model that is more expensive and I should have purchased it.

This is one of those purchases where half of what you get is five stars and the other half is one star. I'll start with the five star portion of this purchase, that being the light box itself. In a nutshell, it is terrific. It has excellent light diffusion properties and gives really nice gradients when using color gels. When fully expanded, objects up to 40cm in height can be comfortably photographed within the enclosure. When you're done with it, it easily collapses back to storage pouch size (25cm) in seconds. For those of you who experience difficulty getting it back to pouch size for storage, I suggest you watch the short YouTube video posted for this same product...it is as simple as a fold and a twist. For that matter, the YouTube instructions should work on any soft-sided light box that utilizes the same type of collapsible wire and fabric construction. All in all, I really like the versatility of the light box itself and how little space it takes to store. As to the color backdrop included for use with this light box, giving them one star is being generous. Each individual backdrop has sharp, deep machine-set creases that you cannot fully remove. I have spent hours carefully trying numerous crease removal methods and still have permanent visible crease lines remaining on each. As these backdrops are kinda sorta a critical component of making full use of the light box, I find these creases very disappointing, unacceptable, and definitely a manufacturing defect. If you don't care how the background looks in your photos, you will be fine using them out of the box. If you want a professional look to your photos, buy this knowing you will have to invest considerable time and effort to make the backgrounds even marginally useful. By way of comparison, think of taking a crisp new dollar bill, folding it in half, and ironing the crease. You then unfold it and iron it flat again. The end result is a flat dollar bill with a permanent visible crease line down the center where the fold was. That is exactly what you get with the included backdrops. Numerous other purchasers have noted the exact same problem in their reviews of this product. Way too much mechanical pressure is used to fold these fabric backdrops for packaging. If you want something ready to use out of the box and you don't care what your photographs look like then this is definitely for you. The deep set creases of which I write can be easily seen in the fifth listing photo for this item. They are permanently set into the synthetic fabric these color backdrops are made from. I have another three weeks before I need to decide whether or not to return this defective item for a refund. In order for me to get full use out of this item, I need to buy replacement backdrop material at the fabric store. If the cost to buy replacement backdrop fabric is minimal, I'll go that route and keep what is otherwise a very useful light box.

I don't know who came up with this idea first, I think it might have been someone at PrusaPrinters, but this has been the best, cheapest, easiest, way to improve my 3D prints. I started out 3D printing in 2013. There were two print materials, ABS and PLA. I preferred ABS for various reasons and got pretty good at printing with it. I faced two problems: warping and the smell. I came to the conclusion that an enclosure was needed to keep in both. I wanted something semi-portable and built a number of enclosures, but wasn't happy with any of them. I read about using the photo tent, but doubted it would work. No insulation and thin nylon at that. A few months later, I got a job where the customer wanted the model printed in ABS. I figured this would be a good time to try out the tent. Ordered on Amazon and it showed up in a couple of days. The 24" x 24" is perfect for my Tevo Tarantula and a spool of Hatchbox ABS. I have the power supply sitting outside of the tent. The prints are fantastic! No warping off the print bed. In fact, I have a hard time removing prints. No layer delamination either. Also NO SMELL. My wife hates the smell of ABS printing. She can smell it from across the house so I usually have the door closed to the room I print in with a fan in the hallway pointing at the door so when I open it, the smell doesn't escape. During this round of prints she came to talk to me a couple of times, opening the door and standing in the doorway. Keep in mind that I was 5 hours into a 8 hour print job and I didn't have the fan blowing into the room this time. She didn't realize I was printing until I was telling my brother over dinner how much I liked the tents. She was shocked how well it worked. Sure it looks weird and probably flammable. But I don't print when I'm not at home anyway. The velcro door is nice because you can open it a small bit or wide open and it doesn't get in the way since you can just roll it back. You can peek through the slit in the door without allowing the heat or much of the smell out. I'm ordering more for my other printers.

This seems very good to use and it appears to be made well enough for it's purpose. While this will not be utilized on a daily basis it seems like it will last quite a while. There are two things that prevented me from giving it a 5 star rating and they aren't necessarily things that will prevent it from functioning but are annoyances. Set up was easy since you pull it in a couple of spots and the thing pops open pretty much on it's own. Putting the thing away on the other hand took much longer than I would have thought. I have used these collapsible type items before so I know how to twist them to pack them up. This thing seems to have a mind of it's own when it comes to collapsing it and storing it in the case. That is where annoyance #1 comes in, there are no instructions of any kind to assist someone in the correct method of folding to pack it away. There has to be an easier method for this item! I got it packed but it is trying it's darnedest to jump back up inside the bag. While there isn't room for it to do that it is bulged out bigger than it needs to be. I'm just hoping that a wrong twist will not break one of the spring steel rings inside. Annoyance #2 is the colored inserts that come with the item as backgrounds, they are folded so they are wrinkled as heck. While this again doesn't make it not function it is a pain to have to steam out the creases without melting the material (I believe it's nylon, which is fine). I'm not sure what could be done about this but I usually roll the items like this to prevent creases or at least minimize them (these are pretty long so a fold probably has to be there). Those two thing do not at all hurt the functioning of the device and I would still recommend it to anyone who needs this type of item for there small tabletop photography.

waste of money. Folds are so ugly

This is a well worth product if you are product shooting.The addition of additional coloured backgrounds adds more to creativity and productivity.I only have one gripe...its a "swine" to re-fold flat,an additional leaflet inside the pack would be helpful, although a printable version is on the sellers description,I printed it and lost it!! It sits now fully assembled in the corner of my studio! Overall,its a large unit, well made and a worthy addition to me as a jobbing photographer.

Elle est parfait et assez grande ! Je recommande !

This product comes at a very nice price. When I received it, I was blown away by the quality. They pack a lot into a real price. Certainly, a great value. I looked at some of the units that have built in lights. Now that is Certainly easier, but one loses all flexibility and creativity. With this device one uses one's own lights and shines them through the tent. The purpose in this device is to defuse the light which is the important factor in this type of photography. If you use the other type of devices, you will get acceptable results. If you use your own lights and diffuse them, you will grow better and better at it and your images will improve with you. If this is what you want, this is the device for you. I have shown an example of my results

Ürünün duvarları kırışık geliyor fakat bunu alıyorsanız temel fotoğraf düzenleme bilginiz vardır, düzenleyebilirsiniz. Eğer sabit şekilde duracaksa yani katlamayacaksanız bir kuru temizleyicide düzlettirebilirsiniz