URFIC 293-435-01 Polished Brass Mortice Knob

These are a good quality handle with coating that so far has survived my dog jumping up trying to open the door by pawing the handles.They still look good and unscratched.

Lovely quality for the price, chunky design, lovely shine. Works well on white gloss doors.

Look good on a pine door. Finish is good but getting to the fixing screws is difficult as they sit under the ball handle but there's only 3 fixing screws to fit.As these were replacement handles the latch operating bar was already positioned and thus had a hole drilled through the door so I only had to position the handles on the door :-Make sure you have a good pozi type screwdriver as it can get purchase on the screws at an angle.It's awkward to mark and drill pilot holes as the handle gets in the way! My suggestion is to put masking tape on the door near to where the screws will go, make sure the handle does not hit the door frame - try opening and closing to check, then with the handle still in place mark the masking tape where the screws will go. Remove handle and drill small pilot holes then remove masking tape and fit handle.Don't be put off by my DIY suggestion above as once fitted they do look very nice and the spring action, where the handle returns to its resting position, is very positive and should release the door catch with ease.

Arrived in good time, in good condition ideal for intended purpose.

Very small door knob came with long bolts so had to drill the door and as bolts were two long I had to cut them with a hacksaw which was a very difficult job

Exactly what I was looking for! You need to put screws in at a slight angle but I didn’t have a problem with this and it doesn’t ruin the look at all. Very happy with this purchase

One knob with spring working fine. The other is damaged stiff and missing the spring.

Bought as replacement door handles. Quite good but difficult to fit, if you are an old bugger like me.