UltraPro 36" (91.4 cm) Wired Bulbs, 3 Color Settings, 2700K/4000K/5000K, Warm White, Cool White & Daylight, Dimmable Under Cabinet Lighting for

Replaced hardwired fluorescent fixture in closet (connected to motion sensor). Installation was not easy, but not TOO difficult. There's not much room inside the fixture for placing all the wires, but the quick connects are very easy. Instruction video is quick but covers the basics. Just be patient pushing the metal past the clips. Once installed, the light is great - very bright and color election is a nice feature.

Great lights, I just installed 5 sets of them - 48", 36" x 3 and 24". I bought these because 1 - direct wire (120v) to replace my fluorescent lights. 2 - dimmable using a separate switch A lot of the LED light kits that I looked at on Amazon were not direct wire to 120v. rather, they came with their own power adapter. Many of these are not dimmable, and the ones that are use their own dimming switch. I wanted to use the existing in-wall switch so I can dim and turn them all on at the same time. These were more expensive that many of the other kits, but none of the other kits matched my requirements. I'm not sure that all the complaints about the complicated installation are warranted. I suppose it often comes down to how much of a do-it-yourselfer you are. And, like everything, having the proper tools helps a lot! IE - fast clamps that hold the lights in place while you drill the holes to mount them. If you stagger the push in connectors (marrettes are NOT needed), there's plenty of room in the enclosure. Using a few extra zip ties also helps a lot for basic cable management. The first one took longer than the others, but after that they were very simple to install once you get on a roll. Would definitely recommend and buy again!

These under-cabinet lights worked very well. The colors seemed accurate and the brightness was just right. Some of the instructions were not clear on disassembly and re-assembly but it can be figured out. I liked the way they looked. They do get warm with extended use but not hot. You do have to provide the wiring from unit to unit and to your electrical connection box. I would purchase again and I have recommended to a friend. 4Certain Little Rock, AR

Nice and bright light bar, used for under cabinet mount for kitchen sink . 3 different light color selections make it a nice option to adjust as needed. Having a built in power switch makes this a compact LED light a breeze to wire in direct. Length is accurate from description, 36" model.

I replaced 5 under counter fluorescent fixtures with these units. After hours of searching, I bought these because: 1. They are bright (high lumens compared to other similar fixtures). 2. They come in 5k color temperature and were one of the only fixtures available in multiple sizes that does (they actually come with rocker for 3 color temps). 3. They were inexpensive and installation appeared straightforward. Installation Tips - * VERY IMPORTANT - The fixture attaches to the frame by "snapping" the edge behind notches in the metal frame. Some of these go in easily and some became my nemesis on the first couple of lights I installed. No amount of force could get them to "snap" into place. On the third light I discovered the trick...use a 1 inch chisel and wedge it between the fixture and the curled edge of the frame. By twisting the chisel you can force the fixture into the notch in a very controlled way (see picture). You may scratch a tiny bit of paint on the edges, but it is all covered by the diffuser anyway and this will save you much pain. * It was difficult to hold the frame in the precise position under the cabinet to mark the mounting holes for drilling. After the first light I ordered the FastCap 3-HLITTLE Little Hand HD 3rd Hand Support System (https://smile.amazon.com/gp/product/B002474UMG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) that allowed me to wedge the frame against the underside of the cabinet while making small precise adjustments. I marked the holes when it was in exactly the right position with no stress and without needing another person to hold it..I highly recommend you use something like this. * If you need to make a hole for the cable other than the punched holes, use a 1/2" drill bit. * Space inside the light is very tight especially the 24" and 18" units. There is room for 2 NM cables only..any other connections need to be done in the junction box or wall. You will need to space the connectors out in the box so they do not block you from attaching the fixture..make a good plan and be very patient with the 18" unit. Aside from the installation, the units are great. Very bright as promised so be sure you get a dimmer. I purchased this pair of Lutron dimmers that they say are compatible (https://smile.amazon.com/gp/product/B008X3CH70/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1). I am going to install them this morning so no feedback yet. The temperature color options are good..we are torn between the 4k and 5k options, the 2.7k is way too yellow for our liking which is why we chose this unit. Most other units only came in 3k which is also too yellow for a modern kitchen in my opinion. Since I was replacing old, thick fluorescent units this unit was less than half the thickness. It is completely hidden behind the front edge of the cabinet so I would have preferred they added 1/4" thickness to the unit and made them easier to fit the electrical connectors. There is a point of diminishing returns when making things smaller and smaller and I think they reached it here.