uxcell Rubber Machine Tool Foldable Accordion Cover Shield Guard 50cm x 40cm

A little fiddly to set up, but working out well so far. Metal chips get stuck in them and are hard to brush or blow out. But at least the ways are covered. This was wide enough to protect my Bridgeport's knee ways and the Y-axis DRO scale on the side too. I did have to drill some extra holes to mount it like I wanted.

This is well worth the price. Once attached to your ways it works without flaws. Set it and forget it.

The mill came with the center front hole drilled and tapped for 1/4x28 threads. I added a 1-1/2”x1/8” x 12” piece of aluminum by drilling and tapping the front saddle way wiper for #8x24 socket head screws and doing the same at the top of the aluminum. I then had to drill three holes at the end of the accordion cover which I used to attached the cover to the top of the aluminum extension on the saddle. This raises the rear of the cover about 1” above the Y axis ways so the cover will fold by itself when the saddle reaches the end of the Y axis travel at the front of the mill. This seems to have turned out well and I no longer have to worry about dirt and chips accumulating at the front of the Y axis ways.

Fit my Witon mill perfectly.

I got it mounted on my bridgeport with a little bit of modification. I had to drill a few holes and even used some high power magnets to help out. Feels very durable and I am sorry I didn't pick one up sooner. No worries

I have a mini metal lathe and chips can damage the ways. This accordion cover is wider than I need but can be cut to size. It is long enough to work with 10-to-14-inch lathes and doesn't bunch up under the chuck.

These are better than OEM for my JET Mill. I bought 2 so I would have a spare. Great value.

2nd time buying 2 units. They last about a year. Both tore where rubber meets steel mount on milling table. Fits on my 20" Y axis and covers ways. Would be 5 star if I got more length of service. Each machine averages about 15 hours use per week