15ft 5m HDMI Cable, Supports 4K@60Hz, 18Gbps, HDR10, 4:4:4, ARC – Slim & Flexible PVC Cord for TV, Projector, Monitor | Works with PS5, Xbox, Apple TV, Laptop & 4K Screens

I’ve tried some expensive thick heavy gauge copper wire HDMI cables and learned the hard way that beyond spans of around 15-20 ft cable length, data transmission can and will suffer and can be hit-or-miss depending on source and destination. This is not the case with these optical fiber HDMI cables. At its 30ft length, I had no issues getting a clear 4K 60Hz signal with multichannel audio to my LG OLED TV regardless of the source. I’ve tried the following: PS4 Pro, XBox Series X, Apple TV 4K, Macbook Pro 16 (with an HDMI to USB-C adapter) and a Razer Blade Advanced 2020. No dropouts, no issues, it all just works flawlessly. Picture quality is just as good as those of a short span heavy-gauge overpriced gold-plated terminated copper wire HDMI cables. Optical HDMI cables are great because the wires are thinner, lighter, flexible, has less strain on the sockets, and easier to manage around and behind furniture, corners, or where ever you want to route them through. The only downside has been that optical fiber HDMI cables have always been cost-prohibitive. That is until I found these at a very attractive price. I have to admit, I was skeptical because of the low price compared to other optical HDMI cables I found on Amazon, but look no further, these are the ones to get if you want to save money and still have great quality. Keep in mind though that just like all other optical HDMI cables, these are are directional and will only work if you connect the source and display terminations to their respective sockets. But don’t worry, ARC features still works just fine despite the “directional” nature of the cable. They were packaged very nicely too, which was a nice touch. Highly recommended!

I had three of the 2 meter cables arrive yesterday morning and was able to swap out the existing cables (Amazon Basic) that I was having handshaking issues with via my Denon AVR-X4400H, OPPO UDP-205, Apple TV 4K and 2016 LG OLED display. After almost two days of non-stop use, I’m no longer experiencing any drop out issues. I was looking for an alternative to the cheap HDMI cables and didn’t want to spend a lot of money trying to find the right cable or on the higher end cables such as Audioquest. These fit perfectly because of the fiber transmission instead of using copper as a conduit. I could swear that the picture on my display seems more vibrant but what I know for sure is that the low sounds in movies and TV shows that I’m hearing are clearer even when the volume is turned down low. Packaging of the cables are first rate. They are shipped in their own box inside the shipping container. The cables themselves are wrapped in fine mesh on both end connectors and the tips have a plastic protection around the plug. Also, nice cables ties (two) holding the cable which I kept and used on one of them because the distance between two of my components is less than a foot. What I love about the cables versus the bigger more expensive brand name cables mentioned above is that they are thin and maneuverable.....even in comparison to regular off the shelf brands. These cables come with a two-year warranty. A plus is that they are available in many lengths. Do not hesitate on purchasing these cables. I’m quite sure you’ll be as happy as I am. Update (1/2/2019): I forgot to mention and for those wondering, these cables do pass object-based audio via both my Apple TV 4K and Blu-Ray player.

My projector is connected to the receiver through a 35 feet long hdmi cable. It works fine without any problem for 1080p video. Recently I upgraded to a 4k projector but I cannot watch movie any more! I know it is definitely the HDMI cable problem. The projector customer support recommended a fiber hdmi cable in the price of $175 which is too expensive. Then I tried to use a HDMI extender with my old cable. I can watch movies with the help of a HDMI extender, however, I cannot see the bluray player home screen. I have to buy a high quality HDMI cable! I was a little wondering about this cable before I bought it because the product description does not clearly state this cable is HDCP 2.2 compliant. The seller quickly replied to me and confirmed the HDCP 2.2 compliance then I ordered the 50 feet cable. I received it today and immediately connected it. WOW! Everything works!! With the HDMI extender I can only see 4k@24hz but now it shows 4k video @60hz (although I cannot really tell the difference by my naked eyes)! Now I can watch 4k video without the HDMI extender! And the bluray player home screen shows up normally! I do not need the HDMI extender any more. The cable is very flexible and actually I feel it is a little bit firmer than another fiber HDMI cable I borrowed from my friend. It is thinner than the old HDMI cable, because it is a fiber cable. I still have a problem though but I do not think it is caused by the cable. When I plug the fiber HDMI cable through the HDMI port on the wall plate, the 4k video shows normally when a disc is played, but I still cannot see the player's home screen, even if with the help from the HDMI extender. I searched online and I found many people have the same problem. I believe it is caused by the HDMI keystone because it is HDMI ver 1.4. I have to bypass the HDMI port on the wall plate and extend the cable from the wall and connect it to my receiver directly. If you play 4k movies on a device connected by a HDMI cable longer than 25 feet, I do recommend you purchase this fiber HDMI cable. It works (again, my cable is 50 feet long), and its price is only half, or 1/4 of the similar products sold on Amazon.

Great product good quality and low price. I Run this HDMI through my walls up to the attic to reach from Receiver to tv. Installation was smooth since the cable is really easy to work with super light and flexible. I gave it 4 stars because is not compatible with A/V receivers so i spent a big chunk of time troubleshooting the reason why it didn’t work. I have a sony 65x900h hooked to a Onkyo TX-NR686 that sits like 40’ from my TV and all my devices are hooked through my A/V receive(Onkyo) so they can all share the same display (sony tv) so the problems with this Cable is that it won’t recognize the signals from other devices so it doesn’t switch back and forward when you for example: turn off firestick to use your apple tv or nintendo switch. Display just turns black. And this was using the eARC or any other HDMI using the A/V receiver as a port. Now when i hooked this Cable direct from my TV to my Apple TV 4K the image was amazing! Colors were stunning and sound was soo clear! That when i notice the difference from copper to Fiber! Whole different level! So if you need the cable just to go straight from video game console, media stream or cable box straight to your TV or projector this cable will work without problems but if you have an A/V receiver than this won’t work for you.

I have the 30 foot version of this cable that's connecting a Yamaha receiver and a 4k BenQ HDR projector. I purchased this cable based on the recommendation of some folks from AVS Forums(awesome site, tons of A/V info). My setup appeared to work at first but soon after I started experiencing random source drops. I thought it was the cable but turns out if you have more than just a single run of cable between your output port and display, you'll probably run into issues. Let me demonstrate: In my case, I had two HDMI wall plates - one in the ceiling going to the PJ and the other behind the receiver connected to it's output. The run in between them was this cable, but the connections on each end - pj and receiver, was copper HDMI. Turns out that to receive the full 18Gbps bandwidth, you can't have any hops back over to copper at distances of 30 feet. At least this was the case in my situation. As soon as I took out the HDMI plates and replaced them with a pass-through plate, the issued immediately rectified itself. No more source drops as I have a single run now between my pj and receiver. This cable works as well as the higher priced ones sold on Amazon. Save the dough and get this one instead. Also pro tip: Don't use anything shorter than 6ft HDMI cables between your sources and your receiver. I was using 1.5 ft. cables before and apparently that causes issues as well because of the short distance between the HDMI interfaces on both the source and the input on the receiver.

I tested this cable for a month running across the living room floor to be sure it worked well with my Epson LS12000 Projector, Nvidia Shield and Denon receiver. It was flawless so I went ahead and placed it behind paneling I installed to run the cable around the room hidden. A little less than two years later I started getting a dead single in and out every few seconds. At first I thought it was the projector but upon further testing it is definitely the cable. The projector behaves erratically cutting in and out even if I'm on another HDMI input. The Projector simple will not work with ATZEBE plugged in at all. Once unplugged everything is fine. So now with the cable buried and carefully run through my room and attached to the ceiling it's dead junk. This is going to be a huge pain to solve. I don't understand how it spontaneously went bad with not changes. Uggggg.

We use this 100ft ATZEBE 4K Fiber Optic HDMI Cable at our church for PTZ HD cameras during live streams, Troy Price TV, and WAGG-TV interviews. 🎬💒 It delivers flawless quality, is super durable, and the price is unbeatable. Highly recommended for any serious media setup! 🔌📺✅

This cable works great, just follow directions, just don't snag or pull on the cable too hard when routing it. Be aware that this is an *active* cable, meaning that there is a circuit built into each end to convert the HDMI to optical at the Source end and then back to HDMI at the Display end. It draws the power through the HDMI connection. Unfortunately, it needs more power than many computer video cards can supply; when I first plugged it in, between my computer and a TV on the other side of the room, all I got was a black screen. I then plugged it into a Roku box instead to test and it worked perfect. Since I knew what the problem was, I searched for "HDMI power inserter" and came up empty (I wanted one that includes a wall wart transformer, not a USB plug that either requires another AC-to-USB adapter or draws power from the computer.) so I searched ebay and found a guy in NC selling them for $11.75. I installed the power inserter between the computer HDMI out and the Source end of this optical cable, and then the other end (Display) into the TV, and now it's getting plenty of power and works great! tl;dr If you get a black screen when using this cable with a computer, then you need an "HDMI power inserter". P.S. Be sure to remember that this active cable is unidirectional, unlike copper HDMI cables (which are passive and bidirectional) - meaning you must plug the Source end into the source and the Display end into the display.

Quality high performance cable is what I needed to connect my Apple tv to my Sony with Dolby Vision. Works perfectly !

Just took delivery of a few days ago of an ATZEBE - 5M Active Optical Cable…. WOW, after 6 months of issues trying increasing quality wired HDMI cables and wasting money with no success in stopping the VIDEO cutting out for 5 seconds at random times through a movie and not knowing what the issue was, I decided to take a ‘risk’ and spend the extra $’s to buy a REAL quality Optical HDMI Cable… I chose this cable and have tested it over the last 2 days in our theatre room connected to a 4k projector. TV, Movies, YouTube, home videos, games etc, all with the nearby Heater fan ( a suspected issue ) switching on and off, and the result… A perfect picture, no glitches or 5 second video drop-outs, it’s very responsive my Sony AV System… it’s a 10/10 from me.. doesn’t get better than that! Paul L - Melbourne - Australia.

I am writing after 1.5yrs of use. Purchased it in Apr19. I have both tv & projectors at opp ends of my living room. To avoid any judders, blackouts or drop in video, use this fiber-optic cable if the distance is more than 15ft. Bit expensive but extremely satisfied with the picture qlty from my Benq 4k projector. Cable is thin & I have fixed connection from Denon 4k AVR & projector @ other end & donot remove it often, since it is a bit delicate. I recommend this cable for longer distances & better 4k reception. I havenot faced any issues like handshaking or intermittent picture dropping etc.Highly recommend.

前回購入した商品と違い満足している。安い商品には手を出さないほうが良い‼

Great value, i compare the difference before and after installing this fibre optic hdmi cable. I get more, healthy and nicer view from this pure and interference free cable.