GoolRC WLtoys XK A160 RC Plane, 2.4GHz 5 Channel Brushless Remote Control Airplane for Adults, Stunt Flying RC Aircraft with 3D/6G Mode and 2 Batteries, Easy to Fly for Boys and Girls

So before taking your plane out for a flight theres some tips and preflight tricks you can do to better enhance your flight experience. First off is that even with the battery tucked into the nose the plane is a little tail heavy however just a few grams of weight in the nose will take care of that and bring the CG right on the mark. As well adjusting the link horns on the servo throws of the rudder to lessen its athority will help lessen the chance of the spiral stall of death some reviewers had a man by the name ground control rc goes over that in his detailed review. Slight reinforcement on nose cone and bottom connecting front wheel arms will help keep front landing gear intact little longer as well keeping the model itself in one piece since it is a very well detailed plane. If you want to have the ability to turn on and off stability using the XK transmitter will do the trick even though it doesnt have hobby grade gimbals it is a decent RTF transmitter, however with the flight board on my purchase i was not able to bind it to my hobby grade trasmitter on the XK Wltoys protocol like many reviewers show. Instead i was able to bind it only on the V911s E119 protocol setting up my own rates on a switch only catch is that stability mode is still engaged almost working like spectrums AS3X assistance. So if you want to fly it with a flight board that doesnt bind to the XK protocol on hobby grade TX than you ll have to use to provided remote. All in all it is a well built and capable J3 Cub not for young age fliers unless they have flight experience under their belt. As well happy to buy from GoolRC since never had a problem with products and esp customer service from them. Edit 09May24 Also from Ground Control RC you can add Wing Cuffs i made mine out of poster board 40mm X 64mm to keep the least amount of added wing surface. The key is to have the cuff come out 10mm from the leading edge of the wing with the width of the cuff being 64mm. Edit 13Aug24 As you can tell i first started with returning all the surfaces back to OEM. I came up with a theory after observing that in this updated FC motor setup with the 2S Lipo was just providing enough output power to climb out. Since a J3 Cub style of flight is relaxed and not full throttle thru out the flight. I Found and tested several flights now using a Ovonic 3S 500mah 30c and verified normal temperature readings on pair of them and enjoyed the relaxing flights of my litely modified J3 Cub A160. In the additional picture it can be observed that i did have to slightly open the battery slot inside the plane, reinforced fwd landing gear and cut out some cross members on both Batt bay and FC bay to allow more air flow to keep temps stable just in case. Now that i have added these adjustments it flies like a dream using the stock TX or even more refined flight on my RadioKing 4 in 1 TX.

Nothing worked right

I’m so upset I bough this back in October for my for Christmas and now I’m unable to return it. When we opener it was broken and when I mean broken, it’s completely unusable! The pieces are missing, screws are missing . Broken arm supports. The motor was seizing. The directions are missing. It’s total garbage!!! The star is there because I had to put one but be aware!

I should have watched several Youtube videos before I bought this product. It is a great looking plane for sure. It seems to have consistant problems with randomly going into a death spiral to the ground which is unrecoverable. I attempted to fly it and it crashed EVERY TIME! I am an intermediate RC Helicopter pilot, this should have been easy to fly....IT IS NOT. I wish I could have returned it, but the plane got broken on the first flight. DON'T WASTE YOUR MONEY!!!!!!! I am ready to smash it up and throw it away. P.S. This is the FIRST negative review I have ever submitted anywhere.......

Waste of money