22800mAh Battery for iPhone 13 Pro, New 0 Cycle Upgraded Higher Capacity Replacement Battery for iPhone 13 Pro with Full Set Repair Tool Kit, Model A2636 A2638 A2639 A2640 A2483

This battery is legit. It was easy for me to install because I have experience but if you are new to installing batteries please go get professional help. The battery charges quickly and stays charged for a long time and doesn't overheat like the last one. Comes with helpful tools but I do recommend having a heating pad or blow dryer or hot gun to help you with this installation.

One of my PS5 controllers batteries was dying very fast but the controller it self still very much worked with no stick drift so after doing some research to see how easy it would be to replace the battery I pulled the trigger on these and I am so glad that I did. These batteries are about 7 to 8 time more powerful than the batteries that come with a new PS5 controller. I installed the battery which only took about 5 minutes after watching a how to video on YouTube and no exaggeration the battery life on my controller now is ridiculous. To test it out I played a game for 10 hours straight and I went to check the battery level after 10 hours and it was still at 100% charge. I seriously could not believe it. To be fare I have all of my controller settings on low and I dont use haptic feedback which is known for draining the controller battery. I also have vibration at the lowest setting and the microphone turned off. My next test will be haptics on with more vibration and even with those things on and turned up it should still be 4 or 5 days worth of game time without charging. Maybe more. At this point with all my controller settings turned down I should only need to charge my controller once a week maybe even once every two weeks depending on how much I game. As much as I game which is every day most of the time I calculated that it should last me a full week without having to charge the controller. I highly recommend these batteries! Do yourself a favor if you still have a working controller but the battery is dying just buy these, watch a video on how to install them and save yourself $75 on a new controller that comes with a terrible battery. At $15 for two of these batteries and the amount of time in-between charging these were well worth the money. Highly recommended! 10/10

The battery life is fantastic. The “0 cycle” claim seems accurate — performance is strong, and the battery shows excellent health right from the start. The included repair tool kit was a huge bonus. It had everything needed to open the phone and replace the battery. The instructions were clear enough. The battery fits perfectly in the iPhone 5/5G model. If you’re trying to revive an old iPhone 5 instead of buying a new device, this battery is a fantastic option. Great value, great performance, and surprisingly easy to install.

Work perfectly haven't had an issue with charging or use time

I was having issues with my controllers holding charge, and needed to tether them to my PS5/PC for it to work properly. Not sure what caused this, as they were only a few years old, and often kept them docked on a PS5-branded charger that stops over-charging according to their website. This battery pack is perfect, the prying stick is needed for sure, and the little screwdriver, being slightly magnetic, helped a little with those hard-to-get-to spots. It allowed me to get in, replace the battery, finally update the firmware and reset the wireless connection, and now my controllers both have batteries and up-to-date firmware so I can use them for my PC! No more tethering thank goodness. WARNING: The process was simple, and there are a lot of good YouTube videos that mention HOW to do this effectively and safely. A bit of warning though that isn't mentioned a lot online... I learned the process of opening the case requires a bit of force, but a balance between force and gentleness, as there's a ribbon wire right near the entrance where most people tell you to pry the case open after removing the black plastic section. That ribbon I believe controlls the motion sensor camera and microphone (one or the other or both). It ripped very easily with a minor amount of force prying the white case open. Try to do it on the sides of that area, not the middle, to avoid ripping it like I did.

Lasts soo much longer than the original. I don’t know how long it was hold on for in the long run but so far it’s great

Battery purchased in Nov 2025. It’s April 2026 now and the battery no longer works. It swoll up so large my screen popped up and the phone powers down randomly and often even with an 80% charge. Don’t buy this battery. Lastly, which didn’t matter too much, the iPhone battery settings did NOT recognize this battery as an acceptable replacement part for my iPhone XR.

I bought the one for the IPhone 12 Pro. For starters, the installation was simple. To me anyways as I have done this for other phones before. It did require one thinking on how to apply the adhesive and I’m about to see if I did it correctly. Why? Because 8 months later the battery needs to be replaced. Why? Because it puffed up due to overheating. Now was it the battery’s fault or the hot truck in required to leave my phone in for work? Who knows, but the heat killed it. It lasted and did a great job while it was new and fresh. Later it slowly degraded by “overheating”. Quite a lot. The original battery never had so many “the screen will stay off while the phone cools” message, compare to this battery. But even in this state, it’s still holds a charge and is functional until my new battery gets here. How is it still working??? Who knows. Maybe I just got a defected one or something, I’m no expert. That being said, I doubt most average folks with little DIY phone repair experience could understand how to install this battery. Hence why I took off a star. But it had everything I needed. I just had better tools I liked to use. The second star was removed because it’s now puffy without even a year going by. Sad.