RUIPRO 8K Full Fibre Optic HDMI 2.1 Cable, Detachable, Armoured, 15 m | Full fibre optic design reduces EMI versus copper cables; detachable modules help avoid replacing the entire in-wall cable

Fantastic product - worked perfectly to connect my Sky Q box to my TV on the other side of the room. The cable is very thin, making it easy to hide, and the signal quality is great. You do need a power feed from a USB port at both ends to enable HDMI CEC.

Had a really tricky cable run to do and a regular thickness cable wouldn’t cut it. Gave this 12m version a try and works flawlessly with the added flexibility of it being able to run up a dot & dabbed plasterboard wall. I am running a gaming PC at 4k 120hz resolution to a TV screen in another room and works great. I had to power the screen end adaptor with the included USB cable. Not cheap but well recommended if you have a tricky cable run and need something much thinner and want to run at a high resolution for PC gaming, PS5 or Xbox.

Cannot recommend highly enough. Beautifully packaged premium product that solved what I had thought was an unsolvable problem. My projector is 20m from my AV receiver and was getting ‘no signal’ from another (cheaper) optical HDMI cable. I was convinced the projector was at fault and was on the verge of shelling out for a new one. I bought this cable as a last ditch attempt and it worked straight away, I needed to connect the usb power at both ends. Now have a solid 4k link without any dropouts - if you need a long run hdmi don’t look any further than this but of kit. Would give 6 stars if I could!

These solved a big problem for me. I wanted to have my HDMI cables in the wall with wall plates behind the TV and the sky box, ps4 etc. I tried normal HDMI CABLES (good quality) and wall plates and it didn’t work due to signal degradation. The RUI HDMI just work. I bought wall plates and ran the fibre cables between the wall plates and then fibre out of the wall plates with the active HDMI connectors on the end.Worked perfectly

Fantastic cable - only minor downside is display side requires you to connect micro USB power to the connector HDMI ( provided in the box ) and it is looks a little flimsy/fragile , otherwise does exactly what it says.

Only tested at 4K 60Hz for now... but works perfectly. Powers on fine with the TV using the USB cable. This was pretty much the only 48Gbps cable I could find with detachable ends as well as a black cable. Much cheaper than other places selling separate MPO cables and HDMI converters. The description says the cable is armoured but indoor rated only... I've used it outdoors anyway to go from the PC upstairs, out down the exterior wall and back into the living room to the TV. It's survived fine out there so far. The cable is only 2-3mm thick and very bendy (although you do need to avoid sharp bends or kinks). If it deteriorates then the fibre cable itself can be replaced with another 10m MPO, whilst keeping the HDMI converters in place.

Just six months in using this 'holy grail' of HDMI cables and it's not fit for purpose. I ran this in my home theatre in trunking from Denon AVC-A1H amp to a Sony OLED A90J. Started off fine as it said it was good for up to 15M, however, I have had all sorts of drop outs in Audio and Picture. Firstly I thought it was the Blu Ray Player that was going to the amp, but then found that even on 4K Amazon and Disney+ apps there are sparklies appearing on the screen. It's such a disappointment and I am not prepared to rip out the old one to put a new one in. Complete waste of time and I would suggest anyone looking at this take extreme caution from someone who has 30 years AV experience and has used it. Wish I could send back!

After a lot of back and forth trying to connect my Sony Bravia 8 II to a Sonos Amp with ceiling speakers, I finally identified the real issue - the HDMI cable.The TV recognised the Sonos Amp, volume control worked on screen, and everything appeared to be set up correctly, but there was no sound from the speakers. I tried absolutely everything: resets, settings changes, firmware updates, nothing worked.It turns out the problem was the cable length. The setup required a 20–25m HDMI run, and although I originally used a high-end directional copper cable, it simply wasn’t suitable for ARC over that distance. Once this was identified, the cause of the issue became clear.I have two identical setups, so I’ll now be replacing the cable on the second one as well. The only downside is having to chase the cables back in, but at least the issue is finally solved.Hopefully this helps anyone else running into similar problems with long HDMI runs and ARC connections.Highly recommend!

Qualité impressionnante. J’ai la version 10m connectée entre ma PS5 et ma tv oled 4k. Tout passe : VRR, ALLM, HDCP, HDR….

I bought this for a difficult 100 ft HDMI run from my equipment area to an 83" Sony OLED, going through a Denon AVR-X3800H.I had been fighting random HDMI blackouts/handshake issues for a long time. My previous setup worked just well enough to be frustrating — sometimes it would run for 10–20 minutes, sometimes only a few minutes, and then I’d get a short black screen. I tried many different settings on both the Sony TV and the Denon receiver: CEC, ARC/eARC, enhanced HDMI modes, different HDMI inputs, and other combinations. I could improve things a little, but I could never get it fully stable.I also tried an HDMI-over-Cat7 extender before this. That worked for basic video, but the handshake was slow and the picture never felt quite like a clean native HDMI connection.This RUIPRO cable fixed it immediately.I tested it on the floor first before putting it in the wall. It ran clean all day and evening with the TV and Denon back on their normal/default settings. No flickers, no blackouts, no long wait for the picture to stabilize.The detachable ends were a big deal for me. I still had to work to get it into the wall, but the smaller cable end made the install possible without completely tearing things apart. I powered the display/TV end with USB as instructed.Bottom line: if you are trying to do a long HDMI run to a good TV/projector and you’re getting random blackouts or handshake problems, this cable is worth trying. For my Sony OLED + Denon AVR setup, it solved a problem that multiple other approaches did not.

Ottimo prodotto! Connettore super compatto. Pieno supporto 8k60.Venditore super disponibile!

Bonjour à tousAprès avoir essayé plusieurs câbles HDMI (dont des modèles cuivre et fibre), je peux enfin dire que ce câble RUIPRO est celui qui a réellement résolu mes problèmes sur une installation home-cinéma exigeante.Mon installation est composée d'un vidéoprojecteur Valerion Vision Master Max, d'un ampli Onkyo TX-RZ70 et d'une Nvidia Shield TV. Avec les autres câbles testés, j'avais régulièrement des micro-coupures d'image et de son, parfois toutes les 1 à 2 heures, malgré un matériel récent et de qualité.Avec ce câble RUIPRO fibre active, plus aucune micro-coupure : image 4K parfaitement stable, son impeccable et fonctionnement global irréprochable.J'ai malheureusement rencontré une défaillance de l'embout HDMI côté source après environ 48 heures d'utilisation. J'ai effectué de nombreux tests afin d'isoler précisément la panne et j'ai pu confirmer qu'il s'agissait bien de cet embout.Et c'est là que le service client RUIPRO mérite vraiment d'être salué : réponse extrêmement rapide, échanges professionnels et courtois, et envoi immédiat d'un câble complet neuf sans aucune difficulté. Grâce à cela, mon installation fonctionne désormais parfaitement.Je tiens donc à souligner non seulement la qualité technique du produit, mais également l'excellence du support après-vente, ce qui devient malheureusement rare aujourd'hui.Pour les installations longues distances, notamment avec vidéoprojecteur et ampli home-cinéma haut de gamme, je recommande vivement ce câble.★★★★★

The product has been fantastic so far! I’m using it with my Nvidia Shield Pro, Denon 11.2 receiver, and a 4K laser projector setup. The main reason I purchased this product was to resolve issues with my old HDMI cable, which was routed through the ceiling and couldn’t support HDR10.This new product caught my attention because it supports all the latest standards and delivers uncompressed data at speeds of up to 48Gbps. With those specs, I knew I had to give it a try. So far, it’s been a great solution to my issue. I’ll provide updates regarding quality or any potential issues as I continue using it.-UPDATE-I have been using the product for the last 2 months without issues or concerns. I am now able to watch HDR10+ source without any degradation in picture quality or loss of picture.