🔧 Upgrade Your Hardware Game!
The OZCO 56621 Hex Cap Nut pack includes 10 durable aluminum nuts and plugs, designed for easy installation and a sleek finish. Ideal for enhancing outdoor structures like pergolas and decks, these 1.5-inch nuts feature a stylish black powder-coated finish, ensuring both functionality and aesthetic appeal.
Metal Type | Aluminum |
Finish Types | Powder Coated |
Material Type | Aluminum |
Size | 1.5 inches |
Number of Pieces | 10 |
Item Dimensions | 8.8 x 4.6 x 1.3 inches |
Item Weight | 8 ounces |
Thread Style | Left Hand |
Thread Coverage | Fully Threaded |
Screw Head Style | Hexagonal |
Drive System | External Hex |
Thread Type | Unified National |
Inside Thread Size | 0.409 inches |
Fastener Type | Flange |
Thread Size | #0-111 |
Exterior Finish | Aluminum |
Color | Black |
K**E
Look great on Gazebo
Bought for use with flat black plates I bought from Amazon. They make the deck/Gazebo Look INCREDIBLE. Easy. Fast, built very very well
K**N
The Cherry on Top
These are a must have to make your project look fantastic.The only drawback is they don't sell them on smaller quantities. I came up two short and won't pay for 10 pack for the two I need.But, they are a must have to make your project look professional.
D**S
Fast shipping
Nice looking caps@
D**Y
As advertised, quality better than expected
Rare to receive a quality a product these days. These fasteners are as advertised and delivered on time. Evidently a good vendor with a good product. My experience was good and will use this source in the future
J**N
These look right and are durable
I loved everything about them they look very good
R**S
Great look and sturdy product.
I am building a large, covered structure for my RV and used these to put on the 6x6 cedar posts that I have. I received the item quickly, and have installed all of the caps, and have even referred to the manufacturers website for installation instructions and have the following Pro's and Cons on this item.I had already bought FastenMaster brand HeadLOK structural screws (from Home Depot or Lowes) to screw thru my post bases as they are very strong and equivalent to the strength of a 3/8" lag screw. These screws fit perfectly in to the Hex Caps and sat very well allowing the Hex Caps to correctly snug up to my post base and have the look of installed large bolts.I have attached pictures of the Hex Caps installed without the screw in caps - the Hex Caps installed with the screw in caps fully seated - the Hex Caps seated flush, even with the end of the Hex Caps - and a picture of the structural screws that I was using.Pro's:- Great, professional, sturdy packaging.- Super clean look and design- Super sturdy feel and very durable- Creates an upscale, "expensive" look at a low cost- Much less expensive than leading brand on market.Cons:While there are not many, I am listing a couple issues that I had, which is the only reason for rating the product at 4 stars instead of 5.- No installation instructions or directions on product box, or with the product. The description on the box refers you to their website for installation instructions, which is just one more thing you have to stop and do if you need them. I agree that installing these should not require instructions, however, I did have a concern about the installation of the screw in cap covers as they did not sit flush, and wanted to make sure I was installing them according to their recommendations. If installed by following the recommendations on their website, the screw in caps can be screwed all the way into a fully seated position even when only doing so by hand.- The screw in cap covers go in very easily. However, they screw in TOO FAR and leave part of the inside exposed and showing which kind of ruins the "expensive look". I went to the manufacturers website and followed the exact instructions for the install of these screw type covers - which says to "hand tighten" only, which I did. Even hand tightening allows the screw covers to be fully seated leaving the end of the opening exposed and showing.There is an easy fix to this though, which I did, and works well, allowing the screw in caps to sit flush with the end of the cover, and stay in without having to worry about it falling out over time.I bought some ThreadLocker Blue (Removeable type, not Permanant type) by Loctite which can be found at any Home Depot, Lowes or any hardware store. I applied a small dab of ThreadLocker to the screw in cap thread, and then just screwed it in until it was flush with the end of the cap, and it now sits in there secure without having to worry about it falling out.Would I buy these again??Definitely. It is a great product that is well worth the extra time and small added expense of the ThreadLocker to get the result that I was wanting - and is still WAY cheaper than the other leading brand on the market but gives the same finished look and result.
K**
Bolts
Love them
S**K
Great finish hardware!
Great quality cap for my pergola installation and give it a high quality finished look! Easy to install and look great.
A**R
Super !
Super comme produit
J**S
Great product
Fabulous
S**F
Nice
Super final touch
P**.
Perfect fit
Amazing productThe look of my pergola change in minutes
Trustpilot
2 weeks ago
2 months ago