GoPro Handlebar Seatpost Mount (GoPro Official Mount)

watching footage of your favorite trails in one position gets kinda boring, so maybe mix it up? I position this primarily on the seat post and when i want to mix up footage of my ride or let the rabbit chase me i pop it on. Pretty snug, fairly stable attached to a seat post on a full suspension epic marathon. Gives a neat perspective of the rear wheel and the trail, works really cool iMO if you have someone riding behind you.I thought the price was decent and the video pretty stable and clear. The quality is the same as all the go pro branded hardware. Good mount to add to your collection.

Works great in all expected posioions and several unexpected ones as well. Because the camera can be inverted, most of my placements hold the camera upside down.I've used it to video myself, another rider in front, a rider behind, and appropraching traffic from behind (just in case).It attaches tightly to a seatrpost, handlebar, chain stay , seat stay, and aero bars. When upside down it is out of the way and easy to forget.A real positive is that it's a mount easy to attach and adjust on a friends bike to get some self footage.Of course it also works great on any other right-sized bar, pole, or tube meaning its much more useful than just for cycling.

What you get with this product is a bag of parts with no instructions at all. The basic clamping mechanism is pre- assembled but the rest is up to you to figure out. There are several combinations that can work and you still have parts left over. It is fairly straightforward though and the product works okay at holding the GoPro camera to your handlebars or whatever. But I had trouble getting the joint just below the clear plastic camera holder tight enough to avoid having it flop down forward periodically, which leaves you videoing the ground if you don't reach up and tilt it back up. On rough or bumpy riding surfaces this would be a big problem. It would be interesting to know if other users of this product have had the same issue.The surfaces that clamp on to the handlebars are shiny plastic and benefit from a bit of roughing up with sandpaper to assure a good hold. I have not tested the product long enough to comment on its long-term durability.

como lo indicado en el anuncio

Placed an order for the item on April 19, 2014 and received the item on May 28, 2014 from Hong Kong. The item arrived - albeit a bit slowly, but is not exactly what I was expecting. When I placed the order, I was under the impression that the item would be the actual GoPro Handlebar and Seat Post mount as packaged from GoPro, which typically retails for $19.99. However, this item does not contain all of the parts that comes in the actual GoPro Handlebar and Seat Post mount. It is missing the two rubber mounting pieces. As far as I can tell, I did luck out as I don't need those items for mounting on my Trek X-Cal.Anyhow, I'm not too terribly disappointed as the price was very reasonable and the handlebar mount that I received appears to be of decent construction and very similar to the actual GoPro mount as far as I can tell. In addition to the clamp that goes on to the handlebar and attached with the 2 thumb screws, there are also a couple of pivot arms and 2 additional thumbscrews.Overall, I believe the item I received is worth the cost. However, know that you are only getting the Handlebar mount without the rubber adapters and may be waiting a bit for shipping overseas.Update: I was doing a little more digging as I'm trying to decide if I should return the item due to it missing the rubber adapters, which I may need as some later time. I noticed that when I click the link from my orders page it takes me to the Handlebar and Seat Post mount sold be "GoPro". However, when I look at the details in my orders page, the item I purchases was sold by "Bluce Tian". It appears that Amazon has replaced the seller of this item since the time I purchased the item. This may explain why there are some conflicting reports as to the authenticity of the item and the inclusion of the rubber adapters.

I do a lot of bike riding, and wanted to capture it with my gopro. This mount is excellent. Easy to place on a bike and virtually goes anywhere you want. The video is incredibly stable too, I know that is partially due to the camera, but I have noticed with different mounts, some are less stable then others. This one by far is the most steady I have especially considering how bumpy a bike can be. I have also used this mount on my Jeep, as I go four wheeling. I placed it on the grill of the Jeep to capture a cool angle that really gives perspective to the trail. Again, the mount is incredibly stable thus allowing for some great shots. I highly recommend having this mount, it can be used in so many ways.

I was skeptical about this mount at first and the amount of vibration that it would transfer up into the camera, but it's proven me wrong. I've used this mount on the handlebars of my mountain bike, riding both on pavement and shredding trails, and the footage is gorgeous. Don't get me wrong, when it's bumpy you'll be able to tell on the video, but on smooth pavement it might as well be a professional motion control rig. The best part though, is how versatile a mount it is - I've mounted my GoPro on the end of trekking poles, pipes, sticks... pretty much anything. With a little bit of foam or something between the mount and whatever it's mounted on, I'd imagine you could reduce the amount of vibration even more... but if it's that big a concern, I'd recommend the "Chesty" body harness mount.

If you own a GoPro and need more angle and mount options than what came with your GoPro, this is what you need! The clamp is made for a 1 inch bar but you can fit it on a larger bar and it comes with rubber inserts so you can clamp it to a bar the size of your pinky finger!! Plenty of extensions and angled pieces so you can get the perfect shot. Very well constructed materials. I'm not gentle with my GoPro, from 4 wheelers, to dune buggy to bicycle off road, this has not failed me! All the screws, bolts and plastic parts fit perfectly and are very solid. If you need a bit more for your GoPro, this is it!!

Todo perfecto

Comprata per riprendere le uscite con gli amici in MTB, facile e pratica grazie ad un taglio in una base delle due viti che permette di toglierlo e riposizionarlo in altra parte della bici senza perdere troppo tempo. Materiale quasi alla pari dell'originale ma ad un prezzo molto più competitivo. Consiglio a chi piace cambiare le prospettive di ripresa durante le uscite. Io la utilizzo per enduro quindi di vibrazioni ne prende parecchie, per ora tutto ok.

I was concerned that this would not fit for my intended use, however it works perfectly. Fits very securely on the end of my trekking pole. Very sturdy metal.

Die Rohrhalterung macht genau, was sie soll und bietet absolut sicheren Halt - (GoPro Original Zubehör).Die ein oder andere Rezension bemängelte, dass die Halterung zu wenig Haftung hätte bzw. dies nur mit einem separat besorgten Gummistreifen erreicht werden konnte. Meinem GoPro-Set (für das ich 18,90€ bezahlt habe) lagen bereits 2 Gummistreifen bei - ein dünner Gummi für dickere Rohre und ein dickeres Gummi als Unterlage für recht dünne Röhrchen. Daher ist absolut fester Halt an allen von mir getesteten Rohren (Skistock, Sattelstütze, MTB-Lenker) gewährleistet und keine Zusatzmontage/Zusatzequipment erforderlich gewesen.Die ebenfalls im Set mitgelieferten Schwenkarme bieten variable Einsatzmöglichkeiten/Ausrichtung der Aufnahmewinkel.Bei Rezensionen, in denen von zu wenig Halt oder von Verrutschen der Kamara die Rede ist und Zusatzmaterialien erwähnt werden, die zunächst und gesondert besorgt werden mussten, könnte es sich daher m.E. um Produkte von Alternativherstellern gehandelt haben?!Bei der original GoPro-Halterung kann ich in Bezug auf Montage / fester Sitz von keinerlei Einschränkung berichten.

Amazing & fits just anywhere on a bike, motorcycle. If using on motorcycles I would suggest do a test run (nothing wrong with the product) the engine tends to generate vibrations & at 30k plus rpm the video starts getting jittery. The mount's rubber padding isn't thick enough to spot it at hight rpm's. The small diameter rubber mount well can give improvement but depends on what is your mounting pipes diameter. The screw fit really snug I was shocked of seeing their strength. I have taken the Arup with 2 extinctions & Speer up to 170kmph the wind does not push the camera a cm away from what you had set it up. Happy buying.