Milescraft 1410 Track Saw Square – Track Saw Rail Square Guide, 90 Degree Cuts from Edge, Auto-Align, Rip Full Sheets Straight and Square, Fast Adjust, Exclusive for Milescraft 1409 TrackSawGuide

This is a very nice attachment to use when cross cutting plywood. For the most part it eliminates measuring both sides, although I do mark both sides and this simply helps a great deal with alignment. If the side you place it on is not perfect or you don't get it aligned perfectly on the edge you will still be off, but I find it very nice for initial alignment. Worth having this tool.

As others have said, this is a great addition to the Milescraft track saw rails. I did discover that the best way to ensure it tightens down square to the rail is to tighten only one screw at a time. That will pull it square, then tighten the second screw for extra holding power. When I tried to tighten both screws at the same time, it did not always end up square, Now I make sure one screw is very loose as I tighten the first one, then the second. Gets it square every time - even though I still take 10 seconds to check. Personally, I think making it maybe 6 inches longer wouldn't have hurt, but it does work the way it is.

Adding this to your Milescraft Track Saw definitely takes some of the fiddling about to get your track square to the piece. Construction and setup are simple and you can speed up the work while maintaining accuracy and removing human error. I installed it on my track and it stays there. Shortened my cut-setup time by 80%. If you have the Milescraft Track or are considering it, grab this too.

Bought as soon as I saw it was available for my Milescraft guide and it has proven invaluable. Makes squaring up cuts a breeze, simple to use, great build quality, fits their track perfectly, easy to adjust and get lined up perfectly. If you are using the Milescraft guide, I would differently recommend picking one of these up, you won't regret it.

Bought this to complete the Milescraft track saw system. Can't complain. Haven't used it much, but it works correctly when called upon. I use it mostly with the shorter track lengths. Otherwise, it's pencil lines for the extended section cuts.

Received very quick and was of high quality

This is a must have. Makes the cut accurate, faster. Measure the line to cut and this squares the Milescraft track to the line. You get speed and accuracy by using this accessory.

This is a good accessory for the Milescraft track saw “adapter”. I am a little nervous about it staying square, because I had to fiddle with it a bit to get it square the first time I put it on. I think the ability to adjust it is a good thing, but you should definitely check it. The piece is solid aluminum, so the quality is great. The design is nice too because it allows for the clamp. I installed mine on the leading edge of the track, because I like having a little runway before getting into the cut.

I haven't a chance to use it yet.....

Muy útil, precisó para guiar lo largo de track saw rieles

A must have for a Milescraft track saw. This tool automatically sets itself to a right angle to the track, and makes it really easy to get a square cut. Highly recommended.

Good

Este accesorio me facilitó mucho los cortes rectos, solo hay que ajustarla previamente y de ahí en delante, a cortar se a dicho.