10Gbe Ethernet Switch Unmanaged with 2 x 10Gb RJ45 Ports ➕ 4 x 2.5Gb Base-T Ports, Desktop/Wall Mount NICGIGA 6 Port 10Gbps Network Switch for Wireless AP, NAS, PC

Bought this no-name (looks like a rebadged Hasivo or YuanLey OEM) unmanaged 10Gbe switch for $119 on a Lightning Deal and I’m honestly shocked at how good it is for the money. What you get: 2 × 10Gbase-T RJ45 ports (real 10 Gbit/s, Cat6a or better) 4 × 2.5Gbase-T RJ45 ports (backwards compatible with 1G/100M) Tiny fanless metal case, completely silent 12V 1.5A wall-wart power supply (included) Real-world performance My desktop (10G NIC) ↔ Synology DS1823xs+ (10G port) hits sustained 1.12 GB/s (9.4 Gbps) copying large 4K/8K video files. Zero packet loss, rock solid. My three 2.5Gbe devices (PS5, Shield TV, WiFi 6E AP on 2.5Gbe port) all negotiate 2.5Gbps instantly and run without issues. Plugged my old 1Gbe devices into the remaining ports and everything just works – no compatibility drama. Build & heat 100% passive cooling, case gets warm (around 55-60°C under full 10G load) but totally fine. No thermal throttling even after 24-hour file transfers. Feels like a solid chunk of aluminum. Pros Dirt cheap for true 10G copper + multi-gig ports Truly plug-and-play unmanaged (literally zero config) Silent, low power (~8-10W idle, ~18W max) Small enough to velcro under the desk Cons (minor) No link aggregation / LACP (it’s unmanaged, expected) Power supply cable is only 3ft long No mounting ears (but it’s so light it doesn’t matter) If you just need a fast, dumb switch to connect a NAS, gaming PC, and a couple multi-gig devices without spending $300+ on a Trendnet or QNAP, this thing is an absolute no-brainer. Already ordered a second one for the office. Highly recommended – saved me from buying a way more expensive “name brand” switch that does the exact same thing. 10/10 for the price.

I bought this NICGIGA switch for my growing home lab, and it’s been fantastic so far. Setup was truly plug-and-play — I just connected power and cables, and it worked right away without any configuration needed. Performance has been rock-solid. All ports deliver full advertised speeds, and I haven’t noticed any packet loss or random disconnects, even under heavy file transfers between my servers and main PC. I also appreciate how quiet it is — no loud fan noise, which makes it perfect for a home office or bedroom setup. The build quality feels solid and premium for the price. The metal housing helps with heat dissipation, and it stays cool even after running 24/7 for weeks. I’m using it with a mix of 1Gb and 10Gb connections, and it handles them seamlessly. If you’re looking for an affordable but dependable switch for your home lab, office, or gaming setup, this NICGIGA model is a great choice. It’s simple, reliable, and doesn’t run hot or noisy. Highly recommend!

Works well and great price. I have two Mac’s with 10gb and 3 with 2.5 gb adapters. They all play nice together.

This will allow you to run a 10GB backbone threw out your house & have every single device run off 2.5GB its great way to save money and still buy new. I am using it right now, it seems to be running pretty cool & it dose not cost thousands to upgrade my complete network + IP cameras all while giving the ability to have 10GB with-in min with additional upgrades.

Doesn’t get hot, does the job, never had a problem, plug and play, fool proof! Casing is made of metal, looks good. Ports work as it states.

Fantastic switch. Ended up running fiber throughout the house instead of Cat Cable. I use Cat 8 shielded patch cables to connect to devices. This has made video at the TVs in my home amazing. The gaming systems, computers, etc all run much faster when needing network connection. Much better than WiFi. It also frees up the number of devices on the WiFi as well. Now the bottleneck to my devices is the internet connection to the outside world. Sadly my town does not have fiber internet yet so I’m operating on StarLink.

I've been running a nas with a 10 GbE SFP DAC on the uplink and 4 proxmox nodes for about 4-5 months now. Works perfectly. During the backup time-frames, with each or the proxmox nodes on 2.5 GbE links it handles a full 10 gigabit transfer rate with no hiccups at all.

I use this switch to connect to a remote server with a 10 Gbps ethernet port, and to other 2.5 Gbps and 1 Gbps devices around it. It is stable and I have not had any problems since installing it a month ago. It is in an attractive package and operates as advertised. It sometimes seems like it is a little slow to connect at full 10Gbps speed - it seems like it hesitates when you first connect to it. I don't really know how to measure this, and it could very well be my imagination. I have purchased a couple more, and I would purchase it again.

安定して動作してます。

Tutto ok

As described and does it's job wonderfully. Providing me the correct speeds to my NAS

Ca semble fonctionner correctement, le produit est impeccable et réactif, connecté sur Freebox Ultra.

Was looking for something to replace my Meraki equipment, didnt need anything overpowering as no longer in IT business, so went with something straight foward, as I already had fibre runing through the house these were ideal as the SFP modules swapped straight over, giving me the connection instead of having to pull a new cable through, leaving the cat5 ports free to use. tucks away unseen, small power supply, no issues at all, the 2.5g ports are to me an improvement over the 1gb shame VirginMedia Hub 4 only has 1gb ports as this doesnt allow full usage but thats Virgin's doing not the switch. Would recommend for simple plug and go situations.