Sporacingrts 2" x32.8'(10M) Gold Adhesive Backed Heat Barrier Tape,Glassfiber Heat Shield Reflective Tape Wrap Roll,Compatible with Car Intake Pipe,Engine Bay etc.

I used this to mitigate heat soak on the charge air system on my 911 Turbo. Data logs confirm that when compared to a factory system, prolonged stable air intake temperatures were able to be sustained for longer periods of elapsed time. This is a very cost effective modification one can do to to any car and have it run more efficiently. I used two rolls to cover my intake manifold and had some leftover when done. If proper prep work is performed and the tape is applied correctly, it will not peel off.

I had bought a roll of DEI brand for 40$ and this one is just as good if not better at 3 times less a roll. Definitely recommend.

I can say that it keeps the intake 10 degrees cooler and after prolonged use you can touch it with your hand and you won't get burned. It's not thick enough like other better quality ones and sometimes it can come off, but for the price and the large amount that the roll comes with, it's not a problem.

good product been having it on for months and no peeling at all!

Very good adhesion and nice aesthetics, it also fulfills its insulation function.

For those that have commented this is just reflective duct tape, that is not accurate. This barrier tape is definitely made with fiberglass. You can't just tear it. It needs to be cut. And for those that say it doesn't stand up to heat and then go on to show it wrapped around exhaust pipes and headers ... well no duh. Was never intended for that purpose and you're risking an engine fire! I've used it to wrap intake pipes that run above my turbo to try to keep inlet temperatures down. I'm not sure how much it really helps but i can say that after car gets up to temp that I can still touch the intake tube now and i believe that is due to the reflective properties of this tape. Before, the black inlet tube was too hot to touch. I'd imagine this would be great for adding a reflective barrier to the outside of air filter boxes on cold air intakes. I can confirm that it isn't the stickiest when near high temp heat sources and you might need stainless zip ties to hold it in place. But if it is several inches from the heat source it is fine.

My 2016 wrx has been having Heat Soaking issues this summer. I wrapped the intake pipe and charge pipe with this tape. Found a simple tutorial on YouTube. Took me about 4 hours to wrap both including time to remove and reinstall the parts. Awesome product. And I have about 1/3 of the roll still left over. Car is running cooler on the highway and while idling for long time.

First try and it doesn’t stick AT ALL to any of my intake piping, complete waste of money. DO NOT BUY! And when I tried to use a heat gun at about 9” away fanning the tape it started to melt instantly, doubt it would’ve done much even if it stuck to the piping.

because pehali bar dikh ne bhot chota hai but tape andar dikh ne abhi toh sahi lag raha