Bsz4uov for iPhone 13 Pro Max Screen Replacement 6.7 Inch, 3D Touch LCD Screen Digitizer for A2484, A2641, A2644, A2645, A2643 with Repair Tools Kit+Screen Protector+Waterproof Frame Adhesive

This replacement screen worked perfectly for my iPhone 13 Pro. The kit included the tools I needed, installation went smoothly, and the touch response is excellent. The display looks bright and clear, making it a great value compared to a much more expensive repair. Highly recommended.

The fitment for my iPhone 12 Pro fit great. It came with new adhesive and tools. For the price and quality it’s a great buy. It also comes with a screen protector for extra protection. I’ve bought some for twice the price before and they were not as good as this one. Highly recommend. The screen is a bit bulky but nothing crazy.

**Warning** Screen is garbage keep your money. I was reluctant to purchase a non-genuine screen knowing the likelihood of it being of horrendous quality. Nonetheless I bit the bullet as it would be temporary since I have plans to upgrade to a newer model either way. To say I am disappointed is an understatement. Now, I rarely leave reviews of anything; good or bad product. I am no stranger to cutting losses and treating same as lesson learnt. However an exception had to be made for this since I was driven to purchase after reading mostly positive reviews of this product. I took care to detail the issues with this product below: 1. The screen is not a 1-to-1 replacement in terms of fitment. Take your original screen and double it; better yet triple it, thats how thick this screen is which means it protrudes from the frame of the phone. 2. The digitizer (assuming this is the correct name for the part) has starter pulling away from the display itself hours after install. 3. The refresh rate of the screen seems terrible. There is a constant glitch whilst using the phone. White trail are left around text whilst i am scrolling. I found placing the device on power-saving mode helps a bit. 4. All prying tools included with the product are made of cheap plastic and fell apart the moment I started using them. Luckily I had a few of them around that I resorted to. 5. Phone is showing unknown part error. To the seller’s credit, this was listed as a possibility albeit, you have to read the product the description. My lesson learnt and advice? Pay the extra for apple care that way you are covered in the event of an accidental damage. It’s not worth the headache dealing with these 3rd party vendors and repair techs. At least for me it isn’t.

Phone screen overall not bad. Decent materials and fit for the price. However, I highly recommend you install a screen saver or have a durable case. Phone screen doesn't fit perfectly flush and can experience issues with lcd adhesion to backing plate. I will recommend this screen and seller, as they honor the warranty with no hassle. My first screen started separating from the backing plate and then would not turn on. After sending an email, the seller walked me through a few steps to possibly resolve on my own but after no luck, they quickly resolved the issue by offering a refund or sending me a replacement screen- no questions asked. Communication and support from the seller was seamless start to finish. My replacement screen arrived within a week (with tracking number) and has been flawless for about a month now.

Works smoothly. Good lcd screen for the price. Easy to install. Came with all required tools

I do a lot of repairs, many of them on equipment that I am not familiar with, so I am very experienced with youtube instruction and video assessment. This was very important for this iphone repair. I did the screen and battery together as it made sense on my older 5S. I was lucky here as my screen broke without any physical impact and it turned out to be a swollen battery that did the damage. If Doctorscreen would post this possibility on it's Amazon page, it would greatly help people with my situation. The screen itself turned out to be great but it took many hours of research and guesswork to finally get it installed and working. The video that Doctorscreen emailed me was the most helpful particularly in the comparison of the line contacts with lego blocks. Some other videos talked about adhesive connections which is not true and effects how you handle them. He also gave the application each one connected. (Write these down!) This was a fantastic understanding when I turned on my phone and the screen had many vertical lines running down it. By squeezing and working the spot of the screen connection I was able to make the lines go away. (Yes, it is a connection issue and not a defective screen.) The issues that were unclear were with the attached gadgets and buttons. First was the fingerprint access button. It explains that if you want to retain this you should swap out the attached one for your existing one. Is this a software issue or just a programming one. It's another pain to deal with that would be easier to leave in place and just reprogram your fingerprint on restart. I swapped out the contact and had to reprogram my fingerprint anyway. No biggie. The other mystery was the facing camera. Most videos had a camera with a copper tape, square ground/shield stuck to the back plate. The only video that addressed this said that it was a shield only and if Apple went to the expense of putting it there, you should put it back. The new screen didn't have this. Did that mean that it was a different version of that camera that wouldn't work with my phone? No one addressed this. As the copper was running into the wire strip, it was obviously integral but swapping out this camera requires undoing and redoing everything, something that I specifically purchased this screen to avoid. I went ahead with the new camera and it works fine. Then there were the mechanical challenges of dealing with fruitfly sized screws. I worked on a cloth surface to prevent screws bouncing away. 3 did anyway. A large magnet found them all. A magnifier lamp helped immensly. A jig made of a framing square and a pinch clamp made reassembly possible. Eyedrops along the way may help out, too. All that said, I am 100% pleased with the screen, accessories and tools supplied. I would buy this again without hesitation, especially as it would be a lot easier to install.

The pictures are taken with a screen protector already attached. Unlike the original display, this one sits above the lip of the phone, and not flush with the case like the original. I thought perhaps I didn’t put it in far enough but the clips all clicked into place, the screws on the bottom went in fine, and it is solid - pressing along the edges doesn’t cause flexing. This makes it sit higher which means it’s more likely to be damaged by a fall. It’s barely recessed in the case. That said, it’s bright and colorful, the digitizer works, and it hasn’t caused any issues with the camera or Face ID. It comes with all the tools needed except a heater, however the pet alone screwdriver broke at the tip when I used it on the second screw. I was worried it stripped the screw but fortunately it didn’t, just broke itself. So the tools are junk and I used good hardened tip tools for the rest of the work. Installation was as expected. Annoying to open - I used a 3D printer bed at 85C for 5 minutes a few times and eventually started lifting the old display out of the bottom. Aside from cleaning the adhesive residue everything went quickly and smoothly after that. If I had noticed the size/shape difference I’d have brought the calipers out to get a better idea of what the issue is - I can only guess now since I’m not taking it back apart. Just know that it works the same and is fine but isn’t exactly the same and will look slightly different.

Very easy to install comes with everything you

- The home button gets noticeably hot after a minute of usage. At first I though this might be due to the glue residue left on the metal panel. After scraping it away with some hydrogen peroxide I reinstalled the screen, but the problem persisted. My hypothesis is that this is due to the poor insulation of the digitizer. Compared to the original one, the light of the digitizer is emitting direct light onto the home button connectors. On the original screen, the black cable coating was protecting the lower part of the phone from this light. Regardless, this is the main reason why I would NOT recommend getting this screen. - The screen color is bleak and blue-ish in comparison to the original. This is something that is expected from my previous experience with screen repairs. - The display connectors came twisted I did not notice and first and had to redo the whole process twice to fix the cable position. - The only positive thing is that the package arrived faster than expected and that the tools included in the package were of good quality.

Der Versand und Verpackung sind top. Aber das Display ist etwas dunkler als das Original und die Farben nicht ganz so satt aber ok wenn man das Display nicht mit einen Original Vergleicht.

Display hat eine sehr gute Qualität kaum ein Unterschied zu sehen zum Original auf jeden Fall eine kaufempfehlung preis-Leistung passt

J’ai facilement reussi à changer ca ma pris pas longtemps suis entrain de ecrire sur le téléphone avec ecran changer envrais hésiter pas et acheter c’est facile et ca vous apprends un nouveau truc

Colour calibration is little dull but works like charm . Bezels are little bigger. No ghost touch detected . Easy to install worth the price tag. They have included all the tools and water protection. Also a very good tampered glass.