Campbell-Hausfeld CW209300AV Pressure Switch for Air Compressors

I transferred the pipe plug, blow-off valve and gauge over to this and it works fine. If replacing the same type of switch you'll have to reuse the clamp that holds the wires from the motor to the switch. The only negative is that the hole for the screw that holds the clamp is not threaded as others have said. A 10-32 tap will take care of that in seconds. The ground wire hole was also not threaded but the original screws was a self-tapper.Wiring is easy; the switch is marked 'line' and 'motor' to show where the wires go. Makes me wonder about the 'electrician' in another review as to why he had to break out a meter to figure it out.

It's a direct fit for an older Husky 60 gallon vertical tank compressor. You have to switch all fitting and accessories over to the new unit as it comes bare. Works great so far. The high limit was set too high and the low limit was set at 90 psi. High limit was easily adjusted down to 135 and the lower limit was not adjustable even though there is an adjustment screw.

Exact fit

Ordered for my husband and it was just what he needed.

Just what I ordered

Husky 70gal compressor. 2nd one ordered and seem to last about 7 years with average compressor use. Probably just buy another to have on hand.

Used for a vertical 60 GL Air Compressor.The old one had melded plastic on one hot lead.

Does not come with instructions. And like most men, we didn't call or look online for help, we just installed and hoped for the best. It would not kick off before blowing the pressure relief valve on the compressor. After we figured out how to adjust it, it worked great. Had to adjust pretty far to drop to the correct 130 shut off point.

Exactly as advertised worked perfect!

Fonctionne tres bien pour remplacement de pressure switch sur un compresseur mastercraft maximum 15 gal

repair compresser

It is not the proper replacement for the CW208700AV. Pressure cut-out is 135 psi. Nonetheless I made it work for my unit with minimal effort. Pretty hard to find the correct part here and when I did the price was ridiculous. Works just as it should, turns on and turns off.

Conforme à la description