NADAMOO Tub and Tile Refinishing Kit White, 1kg / 35 oz, Without Tools

This truly is the best Tile Paint you will find for your bath or shower. I have previously tried Epodex and Rust-Oleum on this project and both did not adhere! When I ordered and applied Nadamoo's tile paint it was very easy to mix and apply, was odorless, and left a nice thick, clean finish. Overall, this product works great and I plan to only use this paint going forward given it's ease of use and value given it's low cost.

Third time purchasing. This has been far better than hiring professionals and Tub and Tile brand at store.Hired a professional to reglaze bathrooms for $700. It didn't last even 3 months. Tub and Tile brand at store is a sticky mess, thin and doesn't look good.With this brand, everything looks like new. No ugly drips. Easy to apply with a foam roller. It's been almost two years since I applied this brand in two bathrooms and recently did a third. One kit was enough for my small bathroom tile walls and the bathtub. See video.Highly recommend!

I have an extensive background in residential painting and have used many different types of paint.Here are the pros: very low odor and dries quicklyHere are the cons: very unforgiving paint- shows every little thing and starts to set up too quickly so you have only a few seconds of work time/wet edge.My enclosure was in horrible shape after 50 years of soap scum etc. I razored off layers of scum that would not come off with cleansers. Then I acid washed, using the Lysol toilet bowl cleaner, and sanded with a 220 pad, rinsed well and dried and then tack clothed everything.My first coat I rolled on with a 1/4" mohair roller, wanting a bit of a stipple first coat. It dried within 2 hrs. then I sanded that down with the 220 pad, vacuumed and tack clothed. The stipple did not smooth out much. The first coat was ok but definitely needed a 2nd coat.My next coat I decided to dry a foam roller but interestingly it yielded just as much stipple as the mohair. Sanded that down again after it was dry and there were still areas that looked a bit faint.So my last coat I decided to try rolling and then very quickly back brushing, knowing I would have brush strokes but I would hopefully have a "smoother" to the touch sort of final layer. And yes that's what I got.Rounded corners are tough. You have to work from the outside edge moving towards the corner but not going past mid corner and from top to bottom and you've got to move fast! Then do the back wall to the next corner and then finish with the last short wall. I did the bottom last.If you're looking for a quick drying, one-day sort of make-over that will help you to feel like you're climbing into a cleaner shower, and you're ok with the surface looking less than a professional/factory finish then it's worth trying.If Nadamoo offered a professional spray-on option this could be a winner.Now the big test will see how it holds up to actual use. Will it show every mark, start peeling and how will it hold up to cleaning?I'll probably post another review in about 6 months to let you know.

The product was easy to work with. Results turned out old kitchen sink new again.

The directions recommend 2-3 coats. I did 4 coats letting it dry 3+ hours in between coats. I did a really detailed sanding job. I degreased it with TSP from the hardware store. I tired the poor method on the 1st coat. I don’t recommend doing that. I bought a paint tray and just used the foam roller until it broke. The roller just came apart. I would recommend to get an additional roller other than the one that was sent. The only imperfections came from user error so over all I’m happy with the outcome and the product. Follow the steps and you should be fine.