MonopriceXLR Male to RCA Male Cable - 6 Feet - Black, 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors, E21 Gold Plated Connectors - Premier Series

MonopriceXLR Male to RCA Male Cable - 6 Feet - Black, 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors, E21 Gold Plated Connectors - Premier Series

Q: I just plugged these into my studio monitors and they are picking up a fair bit of noise.. can anyone help me? thanks

wrong attenuation? probably... having to turn the volume way up? lots of hiss? monitors want +4dB attenuation... look for -10dB/+4dB switch on your monitors and set it to -10dB... if there's no switch, sometimes the switch is using the 1/4" TRS input instead of the XLR (cheaper that way, switches cost extra. switch cable, switch amp ;) some monitors don't like low line levels at all... probably the single most common cause of noise with these sorts of cables is the line level being every kind of wrong. most RCA audio outputs tend to be of the fixed gain sort... & it's too low. not enough info to be more specific without listing all possible sources of noise, without even knowing what OP's noise sounds like... plug everything into one power outlet. one studio monitor plugged into one RCA jack. both plugged into the same outlet. is the noise still there? are you sure it's not the line level? try another cable. if any run near any other cable, make sure they cross ASAP, don't run them side by side. run them in entirely opposite directions where possible. i.e. power down, signal up. is the noise still there? are you sure it's not the line level? try another cable. switch audio output devices. use something battery powered, if possible. is the noise still there? are you sure it's not the line level? try another cable. is the RCA jack yellow???

Q: can these work with a controller that has rca outputs to an xlr speaker inputs?

it is single rca and it goes to xlr.

Q: Can I connect this cable from a coaxial output on the tv to an xlr 3 pin female on the Yamaha mixer?

No, the cable in question comes with a RCA male connector. It will not go into the coaxial connector on the TV. The coaxial connector on the TV is an input looking for 6 Mhz of bandwidth.

Q: Is there a different cable ending using "female rca" and xlr male? i don't want to use rca coupler, which may get noise.

Buy it with the correct ends... Female or male rca ends

4.7/5

Product ID: 6730518

Secure Transaction

Details

Brand
Monoprice
Connector Type
Hdmi to Dvi
Cable Type
XLR
Compatible Devices
male
Special Feature
Braided

🏆Gold plated connectors

🔌6ft length

🔒16AWG shielded

Frequently Bought Together

Monoprice XLR Male to RCA Male Cable - 6 Feet - Black, 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors, E21 Gold Plated Connectors - Premier Series

Monoprice XLR Male to 1/4-Inch TRS Male Cable - Gold Plated, High Fidelity and Eliminate Noise in the Recording Studio and On Stage, 16AWG, 6 Feet, Black, 6Ft

Amazon Basics XLR Male to Female Microphone Cable for Speaker or PA System, All Copper Conductors, 6MM PVC Jacket, 6 Foot, Black

Description

🎶 Elevate Your Sound Experience!

LIFETIME ASSURANCE - Backed by Monoprice's lifetime warranty for peace of mind.
PROFESSIONAL GRADE - Designed for audio professionals who demand the best performance.
UNMATCHED DURABILITY - Crafted with 16AWG oxygen-free copper for superior signal integrity.
HIGH QUALITY SHIELDING - 97.5% copper braid shielding ensures minimal interference.
VERSATILE CONNECTIVITY - Easily convert balanced audio signals to unbalanced for seamless integration.

The Monoprice XLR Male to RCA Male Cable is a premium 6-foot audio cable designed to convert balanced audio signals into unbalanced signals. Featuring 16AWG oxygen-free copper conductors and 97.5% copper braid shielding, this cable ensures high-quality sound transmission with minimal interference. The gold-plated connectors enhance durability and connectivity, making it an essential tool for audio professionals. Plus, with a lifetime warranty, you can trust in its lasting performance.

Have a Question? See What Others Asked

I just plugged these into my studio monitors and they are picking up a fair bit of noise.. can anyone help me? thanks

can these work with a controller that has rca outputs to an xlr speaker inputs?

Can I connect this cable from a coaxial output on the tv to an xlr 3 pin female on the Yamaha mixer?

Is there a different cable ending using "female rca" and xlr male? i don't want to use rca coupler, which may get noise.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

¥5502

Duties & taxes incl.

Japanstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

MonopriceXLR Male to RCA Male Cable - 6 Feet - Black, 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors, E21 Gold Plated Connectors - Premier Series

Details

Description

Have a Question? See What Others Asked

Common Questions