Mud Flaps for 2017-2026 Ford F-250/F-350 Super Duty Without OEM Fender Flares (Single Rear Wheels), No Drill Splash Guards Front & Rear Truck Mud Guards Accessories Set(4pcs)

These mud flaps were an exact match and fit perfectly, the quality is also very well made and came with all the hardware and bolts to mount the securely. The installation was easy, and instructions were easy. I would definitely recommend these to help keep road grime off of your truck.

Fit perfect on my 2023 F250! They are an exact molded match and easy to install. Price point was cheaper than most too. Would definitely recommend these.

I wasn't sure about these mud flaps at first, but after a moment of studying them, I decided to install instead of returning. The installation was fairly straight forward and took less than an hour for all four wheels. I have a 2024 F250 and I am sure these will not only give me good protection in the snow, slush, and ice of winter, but will also give good protection on a muddy trail in the woods when I am hunting or cutting firewood. The only thing you might have to watch for is the clips may need to be opened up a bit in order to properly install them and don't be afraid to use a rubber mallet to set the clips properly. I didn't need to use all of the included hardware due to re-using the stock Ford stuff, but it was nice that it was there, just in case.

They actually fit great and were easy to install.

OEM fit and easy install

I will start off with, for the price I paid, these are a good value. For the average user, they my be a problem. Once installed, they look nice and should hold up very well. Once installed that is. These are in fact a drill less installation. Which is great, they use holes that are alrady tere in the fender to put in their fasteners. There in lies the rub. The fasteners, or lack there of. I started my installation on the drivers side of the truck on the rear wheel well. The installation has you remove 2 plastic press in retainers from the wheel well and one from under the fender rocker panel for the support bracket. You then install 2 press in U-Nuts on the wheel well lip and one on each end of the support bracket. Install the provided bolts through the fender mud flap and press on one of spring clamp on the top fold over lip. Install the support bracket and boom you are done. Looks good and solid with pretty tight lines around the fender and the molding it contacts. Repeat this process with the front fender, except you just remove 2 factory bolts and install the mud flap using the provided longer bolts and washers and you are done. Both installs take about 10 minutes total. EXCEPT... Just reuse the OEM bolts you removed. They are plenty long enough and definitely better quality than the Chinesium counterparts in the kit. You may have to reach in with your fingers and push the fender liner in towards the bolt to get the first one started. But they will work. Time to start on the other side. this is where we see the problem. the previous install took 4 of the U-nuts and bolts, and one spring clamp, just for the rear. I only had ONE U-nut left. I had a BUNCH of other non-useful hardware left, that was not good for installing the mud flaps. It is obviously a generic hardware kit not designed for this kit. Either that, or this company has the worst quality control in China. The things I tell you next assume you have a modicum of skill, and the tools required to be able to install these using your own tools and hardware. First off I have never been a fan of Chinese hardware included in kits like this. It seems like the bolts will rust if you spill coffee on them and go to the bathroom in the middle of your installation. Also, who installs a 2 1/2" bolt where a 1" will do great. The spring metal clips etc., really don't have more than one spring in them. What I ended up doing was removing the rear flap I had just installed. Removing the U-nuts, and installing 5mm Rivnuts in the fender. Then using my own stainless steel bolts and washers to bolt everything in place. To me it looks better and should hold up better with about $5 in additional hardware. If you are not familiar with Rivnuts, it is worth a look. These things are amazing and have saved more than one project I have done. They allow you to install a permanent nut in a hole without needing access to the back side of said hole. There is a special tool for installation, but it can easily be done with a bolt and a nut. So in summary. once installed these mud flaps look pretty close to the OEM units. Nothing fancy, but usable. With a little work they could be dressed up a bit with some stainless badges etc. They should work well and last quite a while if you install them using good hardware. I deducted 2 stars for the lack of correct installation hardware. I mean come on. Mudflaps and bolts, how hard can it be to get that right? I would have probably given these 5 stars if not for that. Value, looking good and easy installation all equate to 5 star rating.

Product is very durable and installation was easy! The protection is top notch to keep the mud off the side of the truck! They look great installed and for the durability they are extremely lightweight!

Typical Chinese instructions. NO spare parts included, I broke 2 clips trying to install since I don’t think there was any product testing that went on. The plastic factory push in retainers will break off when you try to revive them and the ones they give you seem like a really loos fit. My expectation is that the first puddle I hit will rip a flap clean off.