TRQ Headlight Set Halogen 2 Piece | For 13-15 Acura RDX

These headlights were a perfect fit for my 2004 Toyota tacoma. They truly highlight the truck and was easy to install making it a great update to the truck. They are definitely worth the buy! The brightness is awesome highlighting the whole road and surrounding areas making it great when driving on dark roads. I am thinking about buying it for 2013 Tacoma.

My factory headlights were getting pretty wore out and despite several tries at refurbing them through the years they finally got to where sanding, polishing, and sealing was no longer working right. So with the prospect of needing to replace them I started looking at getting a new set. Seeing the OEM GM housing costs and having my eyes water, I went through researching aftermarket options. Most have terrible reviews with condensation, cracking, or fading plastic so it was looking like I was going to have to pay through the nose for a set of OEM lights. Then I remembered on my old Silverado I went TRQ years ago for a set of replacements and they lasted and never gave me any issues. With that in mind I pulled the trigger on this set. Out of the box (which props to the care taken on packing these housings in the boxes), these look just as well constructed as the factory housings. Plastics feel quality and not brittle or cheap and the wires seem like silicone insulated wire making them quite flexible and likely more heat resistant. Fitment follows as well with them lining up perfectly with little fiddling needed to get them to follow the body lines and the plugs going in with no trouble. I did try them with the halogen bulbs they came with and they do work quite well, however I have a quality set of LED high and low bulbs so I dropped those in as shown in the pictures. Overall these are great housings and for the price an absolute steal of a deal. Given the issues with the other aftermarket housings (and that most don't include bulbs or wiring anyway) don't even bother with them and get these. Now mind I've had these less than a day at the moment and my review is just based on initial reactions, but I'll report back in a year if I have any issues or items of note.

Eazy to install. Fit my 1998 Camry. No flickering. Clear lens. Appearance looks better than old.

Two sets ordered, two sets completely broken on arrival. Both sets came with the adjustment pointing at the ground. When using both the coarse and fine adjustment knobs neither will bring the beam high enough to be usable on the road or pass a state inspection. One headlight does not adjust L/R, another the connector for the main wiring harness is too loose to plug it in, all four can not be adjusted high enough. Rubber surrounds are loose and do not seal against the fender or hood. I have never in 30 years seen such consistent poor quality and complete lack of factory quality control. TRQ will not warranty the product and passes the responsibility onto Amazon.

Look perfect, fit perfect, happy customer.

Took ten years off the van’s age! Fits perfectly ‘cept the bulb holes seemed a little off, but the upgrade bulbs I had went in with a little work. Well packaged and good quality…especially for the price! You need to plan for dropping the bumper - not hard. Maybe eight 10mm bolts along the front bottom and two 8mm in the fender well. The rest are plastic center pop rivets. OBTW - from Taiwan (yea democracy!)

The fit and finish was good.. fit right into place no problems there… but the beam pattern is a little wonky.. have some dark spots & sharp edges..and I adjusted them up and down left and right.. got some dark spots out.. price is good all in all a good buy

They arrived in perfect shape. Purchased as a gift for someone’s auto repair. They fit perfectly on the 2004 Pontiac Grand Am-v6. Old ones were foggy. These ones are perfectly clear. They came with bulbs so that was an additional benefit. Thank you so much!

Perfect fit ,you will have to align headlights to see where the light beams are directed

Todo estuvo bien con la excepción que tenía un defecto en el seguro que sujeta la bombilla en uno de los faros y que tuve que buscar un método alternativo para mantenerlo fijo en su sitio.

The headlights are not great, the reflector assembly inside the housing will fall out of the adjustment sockets very easily. Putting it back together is near impossible as its trapped in the housing. Very weak design/quality of parts.

How are they DOT, SAE, and FMVSS Compliant as stated. There are no approval stamps, information on them like the factory ones?

Good quality replacement for my old cracked ones, lights that come in the housings are clear and bright definitely an OEM+ upgrade