YixangDD Resin Bubble Remover,Quickly Removes 99% of Air Bubbles in 5-10 Minutes,96kPa Vacuum Degassing Chamber,Resin Bubble Remover Machine for Epoxy Resin Artwork,Crafts(Patent Pending)

09/01/2026 Today i used this product for the first time for 10 minutes and I am absolutely happy, no bubbles, when the first 5 minutes where done I saw lots of big bubbles and that is why I added 5 more minutes but by the end of the 10 minutes I also saw big bubbles BUT i turned it off and decompress all bubbles disappear. So maybe the only first 5 minutes was enough next time i try 5 minutes and turn off to decompress and see if big bubbles disappear. Very very happy. 5 stars for now.

Best investment ever. This device works so well. I don't know how I got by without it. Completely removed bubbles. Super easy to use. I love it!

Overall, I’m happy with this device! At first, I thought I had wasted my money because I still had a lot of micro bubbles in the resin after 10 minutes. I also noticed on the digital readout screen that the KPA was registering between 1 and 3. I didn’t know what that meant, and I didn’t know it mattered. The 4th time using this vacuum chamber, I decided to gently put pressure on the lid while it was running. I felt the lid sink into itself and the KPA started to climb, all the way to 96. I noticed a huge increase in the amount of micro bubbles, and I panicked. But I soon learned that it’s normal and to give it a few more minutes, and they will all disappear. So apparently, I was doing it wrong at first. The lid is a bit difficult to remove after use, but I can deal with that.

It didn't do it's job, sure it vacuumed and everything but I got more bubbles in my project then I did before not to mention none of the bubbles that surfaced popped so sure I had some clear no bubbles in the bottom but because 75% of it was in a form of bubbles like a bubble bath my project still had more bubbles then ever. Unfortunately I don't have enough time to replace or get a new anything as I have a due date for this project! The heat gun didn't do much of anything for me Unfortunately other then deform the cup I had the resin in and cured the resin faster... I'm really hoping at least the edges won't form bubbles as I can deal with bubbles inside the project but not the sides I don't have enough time to do a touch up once it's finish curing. I have another 3 I have to get done before the end of the week. It's really unfortunate as I was hoping this would work with my limited budget but I guess I should have tried to get the more expensive ones even though they're big and bulky not what I really need but if this small ones do this kind of thing I don't got much choice for my future projects. Key hint: don't buy this, it's not worth it.

Amazing. Seriously, just incredible. It's way quieter than I expected, almost silent, really, compared to any compressor or vacuum chamber I've ever seen. I wasn't 100% sure it would work on silicone, because it's so much thicker than some other resins I've used. My resin, 00-30, has about 30 minutes of working time, and a 4 hour cure time. I mixed and degassed the mixture in one of the provided mixing cups for a 5 minute and then a 10 minute timer. This pulled all the bubbles out of the mixture, I was so amazed. I've attached a picture of two suction cups I've made. The one on the left I had used a homemade vacuum chamber with a vacuum and a spacebag (it basically did nothing). The one on the right is from using this YixangDD degasser. Zero bubbles, even in silicone. It's incredibly easy to use, my four year old enjoyed putting marshmallows in it and watching them grow and then shrink when the vacuum released. I almost never do reviews, but this result blew me away and I decided to post a review. Better price than other options, is why I originally ordered it, I'm so glad I did.