Filament Dryer Box, SH02 Dry Box Filament Sealed Storage Box 3D Printer 2 Spools Holder with PTC Fast Heater, Filament Dehydrator with Touch Screen Compatible with PLA PETG TPU ABS 1.75/2.85mm

⭐⭐⭐⭐⭐ Beautiful Colors and Great Print Quality!I recently tried the Comgrow Tri-Colors Silk PLA Filament, and it quickly became one of my favorite filaments to print with. The tri-color effect is stunning, with the colors shifting beautifully depending on the angle and lighting. It gives prints a unique, premium look without any extra finishing.The filament printed smoothly with consistent extrusion and no tangles or clogging. Bed adhesion was good, layer lines came out clean, and the silk finish added a glossy shine that really made my projects stand out.I've used it for decorative prints, gifts, and display pieces, and the vibrant rainbow colors always get compliments. If you're looking for an easy-to-print filament that produces eye-catching results, I highly recommend the Comgrow Tri-Colors Silk PLA. It's a great value, and I'll definitely be ordering more!It is not Brittler and the temp was great

This tricolor 3D filament blew me away! I used it on my Bambu Lab printer to print the dragon shown in the photo, and the results were nothing short of perfection. The color transitions are smooth, vibrant, and give the model an eye-catching, professional finish that looks like it came straight out of a fantasy movie.Print quality was flawless—no stringing, no clogging, and the layers fused beautifully. The filament fed effortlessly through my printer and produced crisp detail and strong structure, even in more intricate parts of the model. I didn’t have to tweak my settings much at all—this stuff just worked.Highly recommend this filament for anyone looking to add a bold, dynamic look to their prints. It took my dragon from cool to absolutely epic.

I’ve been using a filament dryer box for a while now, and it’s made a noticeable difference in my 3D prints. The whole point of drying filament is removing moisture, and this box does that really well.The unit heats up quickly and maintains a steady temperature, so you don’t have to babysit it. It’s roomy enough to fit several spools at once, which is super convenient if you print with different materials regularly. The build feels solid and the controls are intuitive, so setting the right temperature and time isn’t confusing at all.Since I started using it, I’ve had fewer failed prints, better surface quality, and stronger results with materials like PETG that are especially sensitive to moisture. If you print frequently or keep filament for long periods, this dryer box is a simple addition that really improves reliability and print quality. Highly recommended.I do occasionally have an error when it gets to hot and starts beeping. It turns itself off and doesn’t get hot enough to damage the filament, even when the error occurs with PLA in the dryer.

Works really well, programmable to long run times. Verified as accurate temp control. But WOW is it loud. The fan is not ducted directly through the heater, just blows at the heater, which is weird, and so the air swirls around everywhere and the whole circuit board is exposed to whatever temps you're running at. That's because the temp and hygrometer sensors are on the main circuit board, no doubt to save money.I did design and print a fan duct and fan isolator combo out of TPU which cut the fan noise by 5dB and improved directed air flow and velocity significantly, which reduced drying time. To be clear, I did not use the ones other designed on the various STL sharing sites, but designed my own because I like doing that sort of thing.I'm using these as inline dryers for a Snapmaker U1, so I modified them with a bulkhead fitting PTFE tube adaptor I designed and printed as well.Taking a star off only because they are SO LOUD!!! Not expensive, and a pretty good dryer. Just loud.

This is my first filament drier. I was actually surprised at how well the filament and printer behaves with dried filament. I was having problems with bed adhesion and it turns out that dried filament works wonders in that department. the print quality was good when I could get my prints to adhere to the bed but dried filament is a game changer in that department. My prints are higher quality as well. If I would have known what a difference it would make then I'd have gotten this sooner. The drier is good quality and it is super easy to use. You just pop the filament in , turn it on and select the material and it goes about its work. You can change the drying duration and the built in hydrometer readings let you know if you should pop the lid for a second or two to let the moist air out. It does have a breather at the top of the chamber so that isn't really necessary but it was worth a try based on what I read about these driers. I really like this drier and it will be a standard part of my printing workflow from now on. Definitely worth the purchase.-

Initial problems with programming it, but after getting a return set up, decided it keep it, instructions are not the best, but acceptable. At first it seemed to lock on to an AUTO mode, where I could not manually force it to just dry for 8 hours, so the printer and I had a talk, and now we are friends.

This is my favorite multi color PLA. Solid adhesion and the quality is great. Works on multiple printers on standard settings. Will continue to buy this as everyone I make things for loves the colors.

Nice color combination - that is the only good thing I can say about this PLA. Printing with it is nothing but one issue after another. I have to babysit every single print because several got ruined. The filament is very tightly wound on a carboard spool. I constantly get errors from my AMS that motor is overloaded and I have to manually loosen up the filament on the spool to force it to continue printing. This problem gets continuously worse as you the spool gets smaller with usage. Because of that extra force needed to unwind the filament, the cardboard sides fray and deform after some use which makes it even hard for the AMS to work with it. Every time I have to print with it I have to check on the print and continue to manually loosen it up so it doesn't error out. The only solution is to transfer the filament to a new empty spool so it is not as tightly wound and not riding on the cardboard. I can't wait to finish this roll and I am definitely not buying it again. Look for other options.

Gros projet à peindre. Couleur idéale pour ça et rien à dire sur la constance du diametre et l'imprimabilité en géneral

Auf dem Ender 3 V2 unschlagbar gut. Perfekte Haftung und Druckqualität auch mit Default Einstellungen des Druckers.

I really didn't think I needed a filament dryer, but now that I have this unit all I can say is wow what a difference in my prints. Pla not so much difference but petg and tpu amazing. The unit is quite quiet and comes up to temperature quickly. I highly reomend this dryer box.

Des petit objets

bobine reçue dans les temps, bien emballée. utilisation sans problème. je recommande