10ft x 12" Carbon Fiber Cloth Roll, 3K/220g Carbon Fabric, 2x2 Twill Weave Carbon Fiber Sheets Raw Material, Repair Kit for DIY Repair Cars Furniture

Good carbon fiber repair kit! It comes with a good amount of carbon fiber. I just had to order some fine grit sandpaper. I used it to repair a hole in my carbon fiber bicycle wheel left from a 3” screw. Before and after pictures attached.

I had a catastrophic failure on the rear chain stay of an expensive carbon fiber bike, and I was bound to determined not to take a loss bought this product because it wasn’t the least expensive and it wasn’t the most expensive and it was just the right amount of material for my repair. I paintakenly followed instructions fixing my bicycle, which is a racing climbing, carbon fiber triathlon bike which is now on the road and rides great.

Very happy w purchase. Repaired my seat stay after a complete break. Over 100 miles later & it's still holding up. Plus I have plenty left over. Hopefully I will never need it again 🙏🏼🙏🏼

Dries quickly, very clear, low/no bubbles, easy to use. I used this to repair a carbon fiber SUP and it did a great job. I will purchase it again. I recommend using a digital scale, better gloves that fit you well, and paper cups and popsicle sticks for mixing.

Looks great. Had no issues with the product what so ever.

At recommended, if you wanna start with the carbon fiber

honestly just buy something else

Perfect for my diving flipper fix

Great kit. Lots of resin if you are doing large repairs. Probably short for multiple small repairs. Repaired a bike frame and its super rigid now. Definitely the strongest area of the bike now. Super fun for projects. I will be finding make work projects with this.

Excellent product and packaging. I ordered it to fix some problems on my carbon bike. I've look at some tutorials on YouTube. The packaging says to mix the resin and the hardener 1:1 volume ratio during 3 to 5 minutes. From my experience, I would say that that 3 1/2 minute is enough, it cure and harden pretty fast in the mixing little bucket. The mix becomes very hard in only approximately 10 minutes. So, prepare well your setup before using the carbon fabric with the epoxy mix, just make sure to have everything at hand not to loose any time considering the fast curing of the epoxy.

Work great, just follow the instructions and wear protective gear.

Bon produit

Excellent quality