Cutting Wheels
Product ID: 65113255
⏱️Max 13,300 RPM for high-speed cutting
⚙️4.5-inch diameter for universal fit
🛡️2-layer fiberglass mesh for reinforced durability
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Japan.
⚡ Cut Clean, Cut Fast, Stay Ahead!
LotFancy 4.5-inch Cut Off Wheels are engineered for professional-grade metal and stainless steel cutting. Featuring a razor-thin 0.045” kerf and reinforced with dual fiberglass layers, these discs deliver precision, durability, and safety at speeds up to 13,300 RPM. Compatible with all major 4-1/2” angle grinders, they offer aggressive aluminum oxide grit for clean, burr-free cuts and extended service life, making them the go-to choice for millennial pros who demand efficiency and flawless results.
| ASIN | B0783PCBBC |
| Best Sellers Rank | #44,808 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #105 in Cut-Off Wheels |
| Brand | LotFancy |
| Brand Name | LotFancy |
| Compatible Devices | Angle Grinder |
| Compatible Material | Ferrous Metals, Stainless Steel |
| Construction Type | Bonded |
| Customer Reviews | 4.5 out of 5 stars 720 Reviews |
| Grit Material | Aluminum Oxide |
| Grit Material Type | Aluminum Oxide |
| Grit Number | 60 |
| Grit Type | Fine |
| Item Dimensions | 4.5 x 4.5 x 0.04 inches |
| Item Dimensions L x W | 4.5"L x 4.5"W |
| Item Thickness | 0.05 Inches |
| Manufacturer | LotFancy |
| Material Type | Aluminum Oxide |
| Maximum Rotational Speed | 13300 RPM |
| Product Dimensions | 4.5"L x 4.5"W |
| Unit Count | 10.0 Count |
R**.
Great long lasting cut wheels.
Wheels are very durable and hold their edge through many cuts. Leaves a nice clean edge when cutting. Fits grinder perfectly with no issues. I will purchase these again as needed. Well worth the purchase price.
T**Y
Good for the money
Cut a couple of wheel studs quickly. Didn't lose much material off of the disk. A great price for home workshop.
B**R
Exactly what I wanted, But...
I've used LotFancy FOUR-INCH cut-off discs for years. I love how they're thin and don't remove much metal, which speeds up the task. I'm very careful and almost never break the discs, and wear them down to the central metal ring. However, when I'm using a fresh four AND A HALF inch disc, using a hand-held tool, I can see that even though I'm careful, that thing is bending and warping while it's spinning at incredible speeds. I may have broken some in this "new" condition, but usually not. But it scares the heck out of me to see that disc warping due to my own unsteady hand. IF you use this with a bench-mounted machine, instead of your hand tool, you'll be fine. I just lean to the safe side more than most people. Call me Chicken, but I'll stick to the smaller 4-inch discs.
B**Y
Great product
Cuts rebar super easy. Use in many applications cutting metals
M**S
Great Product
Highly Recommended
G**N
Just as good as DeWalt
These knock-off's are every bit as good as those sold by DeWalt for my DeWalt angle grinder. I've not had one of them 'explode' on me and the wear level seems consistent with DeWalt disks. So far, so good.
P**E
wear down fast
not the hardest grinding wheels available, but reasonable price
S**P
cut a 1-1/16" steel rod with negligible wear
I started by cutting up a pallet where a saw might have hit nails or kicked back. About 1999, I had removed a 25-foot TV antenna mast alongside the house. The base was seated on the tapered end of a 1-1/16" steel rod driven deep into the ground. I couldn't budge the rod, sticking 5" out of the ground. For 20 years, the hazard sat wrapped in pink tape for visibility. The cutoff wheel removed it neatly and quickly. I kept the pressure light so that heat wouldn't damage the wheel by softening the resin. By keeping the pressure light, I was better able to avoid twisting the wheel in the groove, which might have damaged it. After cutting up the pallet and the rod, I found that the diameter of the wheel was 106.4mm. A new wheel was 106.8mm. I'd call that barely broken in.
Trustpilot
5 days ago
2 months ago