Matte PLA 3D Printer Filament Beige 1KG 1.75mm, Matte Finish | Dimensional Accuracy +/- 0.02mm, 1kg Carboard Spool (2.2lbs), Fits for Most FDM 3D Printers, Elegant Surface, No Gloss

Elegoo Matt is my go to filament of choice. It prints amazingly in my Bambu X1C with very few print failures. Things it does great at. Bed adhesion - I have never had to worry about first layer issues with this stuff, if anything it manages to stick just a little too well, needing a little patience for it to cool before removing from the plate. Colour matching - I've bought quite a few rolls of similar colours are various time intervals over the last year or so since I started using it. The colours seem to match excellently with little variance. Whilst I'm reviewing the black and white here, I have quite a lot of the colour option and the same goes for all of them. It's my go to filament.

Good matte finish. Prints well

Really good quality filament with a nice matt finish. Bed adhesion was great on both sides of the standard Elegoo carbon 2 build plate.

Printed well, no issues in feeding or retracting with AMS.

Elegoo filament prints very well and it's consistently strong enough for what I use it for. A good tip. Dial in your settings using the latest orcaslicer app. Do a temp tower and the other four tests that you can and save the setting for this filament. I have printed two rolls of this for two game inserts and it looks fabulous. I'll buy more of this filament. It's good quality.

Perfect wood colour filament

Really loving this brand at the moment

Does pretty much what is expected of it. Produces a nice finish; not entirely matte but definitely unglossy.

Elego matt black is worth Don't go for grey so many entangle issue I would rate 5/5 for matt black and 1/5 for matt grey

J'ai testé énormément de filaments, mais ce PLA Matte Noir de chez ELEGOO est une véritable révélation ! Si vous cherchez un rendu ultra-qualitatif qui fait instantanément "produit fini" et professionnel, ne cherchez plus. Voici pourquoi ce filament est devenu mon indispensable absolu : Rendu esthétique incroyable : Le noir est profond, d'un mat parfait et totalement uniforme. Il masque superbement les lignes de couche (layers). Les pièces imprimées n'ont pas cet aspect "plastique brillant" habituel ; on dirait de l'injection plastique haut de gamme ou une pièce usinée. C'est parfait pour les projets fonctionnels, le prototypage ou les objets design. Facilité d'impression déconcertante : Il s'imprime comme un charme. Aucune galère de warping (décollement), une excellente adhérence au plateau et entre les couches. L'enroulement de la bobine est impeccable (pas de nœuds), ce qui permet de lancer de longues impressions les yeux fermés. Zéro stringing : Même sur des géométries complexes ou des pièces avec beaucoup de rétractations, le résultat est d'une propreté chirurgicale. Pas de petits cheveux d'ange à nettoyer post-impression. Rapport qualité/prix imbattable : ELEGOO frappe très fort. Avoir une telle constance dans le diamètre et une telle qualité de finition à ce prix-là, c'est tout simplement bluffant. En résumé : Un filament fiable, tolérant et qui sublimera toutes vos impressions 3D. Je recommande les yeux fermés et je vais commander à nouveau sans hésiter. Foncez !

Jätte fina färger . Super nöjd

I took a chance and ordered this because I needed something similar in color to Bambu Labs Matte Lilac Purple and I needed it quick and in a hurry. I ran out printing my impatient 9yo daughter an axolotl and since this is one of her fav colors, and BL shipments can range anywhere from 3 days to over a wk, I went this route. I've had really good results with Elegoos neon green PLA+ in the past so I took the chance here, and it paid off! It's nearly identical in color and prints with the exact same settings as the BL matte pla on my BL printers. The neon green did as well. Both have a good deep color saturation and layer lines on her axolotl are almost nonexistent besides the top of the head. I printed the axolotl with a .6 nozzle and I'm sure I could've done more with the variable layer lines but its good enough for us. She's happy so I'm happy. The wife liked the color so much she has me printing her a Stanley cup chapstick holder as we speak, haha. No issues in the AMS either though I will print some spool rings eventually. No issues with snags or serious bends in the cardboard spools binding up the AMS. Fits nice and tight on the A1 Minis AMS Lite as well if anyone was wondering. I did dry it before use but I believe it would've been just fine out of the box. 10 out of 10 will buy again. I'll add a cpl pix of prints in the green as well. FYI: The purple pairs well with my daughters 2nd fav color, hot pink. Haha

⭐️⭐️⭐️⭐️⭐️ 5 stelle su 5 📝 Descrizione generale Filamento PLA opaco da 1,75 mm, bobina da 1 kg, precisione ± 0,02 mm. Colore blu ghiaccio, ideale per modelli che devono avere un aspetto elegante e poco riflettente. Compatibile con la maggior parte delle stampanti FDM. 👍 Cosa funziona bene Finitura opaca bellissima: riduce i riflessi e nasconde bene le linee di layer, dando un look professionale ai modelli. Costanza di diametro: estrusione regolare e precisa, nessun under-extrusion o intasamento anche in stampe lunghe. Ottima adesione al piatto: con piatto a 60 °C il primo layer aderisce bene e il warping è praticamente assente. Colore uniforme: il blu ghiaccio è molto elegante e resta identico dal primo all’ultimo metro di filamento. Bobina ben confezionata: sigillata sottovuoto con essiccante, il filamento arriva perfettamente asciutto. 👎 Cosa migliorerei Fragilità tipica del PLA opaco: rispetto a un PLA+ tradizionale è un po’ più rigido, quindi meno indicato per parti che subiscono urti. Temperatura precisa necessaria: per la migliore resa va stampato a 200-205 °C, se troppo caldo perde un po’ di opacità. 🧪 Esperienza personale L’ho usato per stampare supporti per elettronica e parti estetiche per un case di progetto: il risultato è stato eccellente, con superfici omogenee e dall’aspetto satinato. Anche a layer 0,2 mm e velocità 60 mm/s la qualità è molto alta. Non ho avuto problemi di stringing e la bobina si è svolta senza intoppi fino alla fine. 💡 Consigli per altri utenti Se volete il massimo effetto opaco, stampate con ventola al 100 % e velocità moderata (40-50 mm/s). Conservate il filamento in contenitore chiuso con essiccante per mantenere costante la qualità. 💡 Consiglio per il produttore Un indicatore graduato sulla bobina per controllare la quantità residua sarebbe molto comodo, specialmente per stampe lunghe. #Amazon Vine: Disponibile a essere selezionato