Question 1

Does this measure salt (NaCl) or sodium (Na) ?

Accepted Answer

It measures salt (sodium chloride).

Question 2

What calibration and conductivity solution do I use ?

Accepted Answer

ORAPXI salinity meter has 3-point-calibration, which means you can calibrate the meter with 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm solution seprately.
Depending on your application needs. If you test hydroponic nutrient, the tester need to be calibrated 1413 μS/cm solution. If you test saltwater pool, the tester need to be calibrated 12.88mS/cm solution. If you test aquarium tank, the tester need to be calibrated 111.8 mS/cm solution. If you test all application, the tester need to be calibrated 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm calibration solution.
All calibration solutions can be purchased at Amazon by searching for "1413 μS/cm calibration solution"，"12.88 mS/cm calibration solution", "111.8 mS/cm calibration solution".

The calibration steps are as follows：
a) Prepare 1413 μS/cm standard solution, press POWER button to turn it on.   Insert the tester compound electrode into the standard solution;
b) Press MODE/CAL button, adjust the tester to EC mode, the word “μS/cm” will be displayed at the left top of the screen.
c) Press MODE/CAL about 4 seconds, then release the button, the “CAL” symbol will display, then a value will flash 3 times on the screen, when the value starts to flash, press down button( If the flashing value is higher than 1413μS/cm ) or up button ( If the flashing value is less than 1413μS/cm ) to adjust the reading toward 1413μS/cm.
d) After adjust the displaying value to 1413 μS/cm, then release the button, waiting the reading stop flashing, the calibration is finished.
The 12.88 mS/cm and 111.8mS/cm solution calibration is the same as above procedures.

Question 3

Does this measure salt (NaCi) or sodium (Na) ?

Accepted Answer

Measures salinity.  I use to measure the salinity in my reef tank.

Question 4

can this unit also show Celsius

Accepted Answer

Yes, I believe it does, though it isn't sitting in front of me at the moment.  I have found this perfect for my 600 gallon goldfish pond.

ASIN	B08GC7JCV3
Best Sellers Rank	#15,796 in Pet Supplies ( See Top 100 in Pet Supplies ) #173 in Aquarium Water Quality Testing & Treatment
Brand Name	ORAPXI
Customer Reviews	4.3 4.3 out of 5 stars (1,729)
Included Components	salt tester
Item Length	183 Millimeters
Manufacturer	ORAPXI
Model Number	LD-154
Part Number	LD-154
Recommended Uses For Product	Aquarium, Seawater, Marine Monitoring
UPC	736139474435
Unit Count	1.0 Count

Digital Salinity Tester for Salt Water - Waterproof IP67 Salinity Meter with ATC Large Range 0-200ppt Saltwater Tester for Seawater, Aquariums, Marine Monitoring, and Koi Fish Pond by ORAPXI

Details

Details

Description

Specifications

Common Questions