KEZE 92003 Silicone Grease with PTFE,Teflon-Based Lubricant Silicon Grease Tube for Machine Automotive Rubber Seals 3D Printer Plastic Gear Parts Sliding Door Window Track,Plumbing Faucet O Ring 1 oz

I bought this with 2 things in mind, one was lubricating the slide bar on my deli meat slicer and it worked wonderful for that and the slide is now much smoother and easier to use. The second thing I bought it for was to lubricate some o-rings on my Coleman fuel stove. the old o-rings had after 35 years failed, I bought new ones but when trying to insert them dry it was pretty much impossible, one of the people in a Coleman restoration group I am in said to pick this up and use it to lubricate the o-ring to facilitate easier insertion and seating. This was successful with reducing my frustration of having torn 4 sets of o-rings and with this being used I was able to seat them on the first try with no tearing and no leaks.

I salvage vintage serger and sewing machines and fix them.The big mistake is the wrong grease people use on them which seizes up the whole machine.Wrong grease - White Lithium Grease, Vaseline, Automotive grease, Synthetic grease with calcium, etc.Wrong Oil - Machine oil, crude mineral oil.Correct Oil - Sewing machine oil which is refined Mineral Oil or even better Triflow Silicone Lube (oil) on all the non gear parts. Triflow will not harm plastics but Mineral or Sewing oil will harm them.Correct grease for Gears is this pure Silicone with PTFE (Teflon). Teflon adds a silkiness to the grease. Silicone does not damage plastic or nylon gears/ parts, whereas the other greases degrade them.Silicone is not harmful to rubber in case it lands on the belts the others will degrade rubber.Silicone clings to the gears as it is sticky - you want that so grease does not displace and keeps gears lubed.Silicone does not react to heat so it does not degrade or melt away with heat as the others will too.I could have used Triflow Synthetic grease too, but I don't know what is mixed in there and that could degrade some of my nylon gears as in the White Superlock 534W-2 Serger I have. Plastic /Nylon gears or camstacks degrade with age and crack after 10-20 yrs of use so why accelerate the process with corrosive greases, right?After careful research, this is my choice and I feel it is safe for every type of gear. A fine product.Note: Old vintage motors like the Singer 301, Singer 221, 222 Featherweights, etc specifically need this grease mix:Refined White Vaseline (on Amazon)Refined Mineral oil branded as Lily White oil or generic (on Amazon)Use mostly this combination, heavy on Vaseline with a few drops of oil mixed in. Use this only on the motor shaft wicks, soak the felt pad with it and the felt wick sticking out. As the motor turns and generates heat, the Vaseline mix melts and leaches out on the motor shaft, slowly lubricating it. You don't want too much oil near electrical things so this was devised. Genius design! So be sure NOT to use Silicone grease or Triflow Lube on these wicks, only Sew Retro grease or my DIY formula.

Why did you pick this product vs others?:Because it is food grade, no impurities! Works great for everything from orings to moving parts lubricant!

This is a not too large, not too small set of 2 silicone lube tubes. It works great around o-rings and is perfect to lubricate my diabetic dog's lancing pen. Compatible with rubber o-rings for various devices. Handy to have 2.

Great stuff used it on multiple applications. But expensive I will look for a cheaper version.

Good product, reasonable price. Bought it for the RV toilet seal. It does the job.

I bought this for water pumps in my pond and aquarium.This grease came to me highly recommended by aquarium enthusiasts to keep their aquarium filters operating properly.The moving parts need lubrication, and this is the stuff. Especially HOB (Hang On Back) filters like this one that I have on my 75 gallon aquarium. This grease will not hurt any of the inhabitants of my tank. It is safe for everything: fish, snails, shrimp, etc.I also use it around seals on things that are exposed to moisture. Like battery compartments that have rubber or silicone seals. You can run a thin layer on the gaskets and this will keep the moisture out without hurting the seals.The nice thing about this 3 pack is that I can dedicate a tube for my fish, one for my house and one for my shop.It's great for so many plumbing uses.

I ordered this product to use on the commode seals in our motor home. It seems to work perfectly for that purpose.. I also used it to lubricant my sewing scissors. I am sure I will find many other uses.