248903 Automotive High Heat Coating Spray Paint Resistance up to 2000°F (1093° C), Flat Black, (340 grams/Can)

Amazing product. Completely prevents rust and sticks on to bare metal really well. I have a 2020 interceptor which had a lot of rust on the exhaust head, I used HCB1 to dissolve it and cleaned the area, I am not sure if this was necessary, after doing that I applied this rustoleum high heat flat aluminum, the whole head looks new now and it dried quickly as well. Definitely recommended if you are using it for similar jobs.

Not resistance to petrol it dissolves. Otherwise it gives good finishing

Follow the instructions and use this for best result must recommend for bike silencer

Good quality paint.thsnks

I used this as a base coat on my bike silencer and engine Guard. the coating and spray was amazing.. i had my silencer sanded before the base coat.. it cover almost all scratches.. i had some heavy rust bumps on the curve of the silencer.. it wasnt fully covered.. ya bcoz those r bumps.. soo.. i had some more coats over there before my final black color coat with 3M silencer coat.. If i went for the Black color Rust-Oleum i wouldn't need 3M.. i had other plans for the grey. After all this i still have like half of the can.. it can do Twice the 3M 's job.. spray quality is nearly same as 3M.. if at all it is a little better than 3M. They have even and good thick spray till the end. I tried like almost all Indian brand paints for automotive.. asian paint, cellux 2x, vista.. compare to all this Rust-Oleum is way better but a bit costly. If u have no problem with money go with Rust-Oleum. they are costly, yes.. but it can do more than twice the Vista Auto Care Spray Paint and more than 4 times Cellux 2X..

The clear coat high heat spray is not up to the standard as per their claim for absorption of heat. I hv applied on car engine and silencer this clear heat resistance coat and the result is dangerous bcz engine room and silencer keep warm after 2 hours of car stop and parked . The entire engine and silencer are too much hot so we cannot touch so it is not a perfect heat resistance spray as claimed by seller and fear about high temperatures remain may caused damage to car No solution from company

First of all i got the paint with a broken seal cap, although not a big deal because the paint seemed to be intact and fine Now i have a bike whose exhaust heats a lot and it had to be painted due to scuff marks and scratches , i prepped the surface with some sand paper (400 grit) and cleaned with rubbing alcohol, i sprayed the paint as instructed and tried to bake , the paint bubbled due to high heat but i switched the bike off and let it sit and cleaned the bubbled paint immediately, i let the paint sit overnight and fired up my motorcycle again in the morning, again it bubbled but now from some places , as this was my 1st paint DIY so i am sure that this bubbling is on my part and not on the paint part, i probably made some mistakes in the prepping and spraying of paint , the surface where it was nicely prepped and primed are looking awesome , go for the paint but get the prep done correctly and go for primer before paint , don't buy from here just go to local market and ask a automotive painter to prep and prime the exhaust before you paint

I followed the instructions on the can carefully, but I don't possess the skill set to sand the bike well, in spite of that, with only 1 layer of coating the colour has stayed for more than 3 months now with absolutely no signs of wearing off. Used it on RE Thunderbird 350 on the silencer, where most people complain of the paint burning off, this one is truly heat resistant, it has not chipped even a little bit. Great purchase

I used Rust-Oleum High Heat Spray Paint in Flat Black to refresh an old, faded fire pit ring, and the results were excellent. The paint went on smoothly with even coverage and dried quickly. The flat black finish gave the fire pit a clean, like-new appearance without looking overly shiny or artificial. After several fires, the paint has held up well to the heat with no peeling or flaking. Proper prep definitely helps, but once applied, it provides a durable finish that stands up to outdoor conditions and high temperatures. If you’re looking to restore a fire pit, grill, or other high-heat metal surface, I would definitely recommend this product. Great coverage, easy application, and impressive durability.

As long as you follow proper baking procedures works great. The color is VERY matte! Be aware. But also nice. Held up well so far after 1 month.

Very durable, easy to use, scratch protection, bottle didnt leak when used, had a quick dry finish, used one bottle to cover all 4 brake calibers with some left over in the can, used for high heated area that covered everything i needed to be covered

Good stuff!!!

came on time