Philips WeatherVision LED car headlight bulb (H4/H19), ultra-compact direct-fit, Halogen color match, easy install, LED performance, 3500K, set of 2

Awesome LED for upgrading as safe on wiring as the wattage is 20W each bulb, which is under the capacity of 60/55W of halogen. The manual guides how to position the bulb so do check it before installing it as it makes sure that the light does not blinds the oncoming traffic and gives the most output from your headlight reflectors. The other options are not positioned properly like your old halogen for which the light body is made for and this Philips LED is the most accurate positioning in comparison of other brands.

This does not fit in new model swift 2025 headlight whereas it claim to be a headlight that fits in this model. It's only fit as a fog light not as a headlight I had purchase but return immediately. Company please rectify it.

Its a very good quality automotive OEM grade LED light . Pros : * 3500kelvin colour temperature is exactly like Halogen light output. * 25-30% brighter than standard 35w philips halogen filament lamps that comes stock in few cars. * The wattage is 20W per LED. So its easy on car wiring and fuse. * Compact size , so fitment is easy and direct and dont need much space . The cooling fan is very small to be noticed. Cons : * Its Not CAN compatible.. Meaning the car may throw fog lamp warnings on your dashboard due to less current usage. If you use VW/Skoda cars these warnings can be disable with help of obd tools. * It is not for someone who want high bright light output and white colour. I am using it in VW Taigun Topline variant . Satisfied with the output spread of light.

Since last 3-4 years, I was searching for a 4200K fan-less LED headlight. So, that I can put dust cover without altering it and keep my headlamp free from dust & water. I don't like cool-white due to poor visibility in rainy season. I was dreaming when would Philips or Osram make a fan-less Warm-White LED. I could find fan-less led as well as warm-white LED, but not combination of both. Few weeks back, I decided to go for OSRAM 4200K LED, just added to cart. Later, I saw the Instagram post about PHILIPS 3500K LED and purchased it. I am thankful to Philips for fulfilling my dream. Even it size is similar to halogen bulb, it comes with a smaller cooling fan and copper cooling tube. Pros: -Since fan is too small, you need not have to cut the dust cap for Maruthi vehicles. -As others said it lights brighter than standard halogen bulb. -Warm white 3500K really help in poor whether condition compare to 6500K. -It just 20W + 20W compare to 65W + 65W halogen. -Even it size is similar to halogen bulb, it comes with a tiny cooling fan and copper cooling tube. Cons: -Yes, its over priced. It would be better if its under 3K Rupees. -Not sure about durability as Philips claims 1500hrs lifespan. -Not recommended for those who want high brightness. Those who want, same model with 65K(cool white) is available. -Light appearance would be better, if it has 4200K instead of 3500K color. But I know that it would compromise the visibility in poor whether condition. Recommendation: If your dust cap is too old or melted, it's better to use a new one or clean dust cap before you install it. You may apply Vaseline on the dust cap hole to insert the cap smoothly.

Installed in my Toyota Glanza. Definitely better than stock Halogen lights but not worth for 5k

The box has a scratch-off mark that reveals a 16 digit code that can be checked in a philips website (which can be opened by scanning QR above the scratch code) for authenticity. That site said the code to be authentic. Definitely higher light output than stock. I replaced the bulbs in our Honda BRV myself in 2 minutes. Rotating the bulb to remove the bulb from housing is easy, but detaching the bulb from power socket is not that easy. Just see videos on how to detach the power socket from bulb, as there is a small clip with power socket that holds them together. You either need to press the bottom of the socket or use a flat screw driver to detach that clip. No impact on dust cap. Size is perfect match of halogen. Perfect for any projector setup. The box says it is designed for reflector housing too, but I am not convinced as there will definitely be a blinding hotspot with LED on reflector. No one will know it's an LED as it matches halogen colour temperature. The company ultinon motion seems to have filed for insolvency recently. Not sure on how the support would be. If you want a safe, legal, upgrade for stock halogen to LED, this seems to be the only option. Osrams have drive/ballast unit and not a halogen colour match.

जो बल्ब दिखाए उस की जगह कोई दूसरे और यूज्ड बल्ब भेज दिए, ब्रांड बॉक्स पूरा टूटा हुआ आया। 4-5 बार कंप्लेंट करने के बाद भी एमेजॉन ने अभी तक रिप्लेस या रिफंड नहीं करा।

Fits perfectly on my i20 Sports (O) IVT, H19 bulb type. Lighting is far better than stock bulbs. I bought all weather bulbs (not white) I like these bulbs. These are little costly I should say, hope they last long as mentioned here.

雨雪で見やすいハロゲンと同じ色で ぱっと見ハイパワーハロゲンバルブと同じ色、光量で明るく 尚且つ省電力(20w) 期待寿命は1500時間との事(2年保証) 簡単にポン付けでき、光軸、カットラインなど問題ない。 爆光を期待しては駄目、公称ハロゲンバルブ比光量130パーセントで 付け替えた感じ、明るさはハイパワーハロゲンバルブのソレです 寿命が 純正バルブ1000時間に対しハイパワーハロゲンが800時間程度ですが、 このLEDバルブは寿命1500時間、かつ省電力でバッテリー負荷軽減 ここに5000円強払う価値があると思えるなら買いです。 あとはパッシングがキレッキレになるのが良いかな 写真のバルブ根元スリットにチラッと見える金色が ヒートパイプのようで、LED基板の熱を根元のファンまで移動させ冷却する構造で 今までのLEDバルブのように、ライトの後ろ側にファンが飛び出す構造では無いが、冷却出来ている様子。

HIR2ハロゲンのプロジェクターヘッドライトに換装した。6000Kなどの高色温度品のように目に沁みることもなく、ハロゲンより明るくなり、ナイトドライブのストレスが減った。光に青み成分が少ないので雨の日も快適である。カットラインはキレイに出たが、照射範囲に放射状の明暗が出た。検品済みシールを一度カットした封緘シールの上から貼ったものが届いた。メーカー検品？販社検品？開封返品再販か？商品自体には満足だが、もう在庫がないみたいなので交換はしてもらえそうにない。2年保証はどうなるか不安を感じながら使用中。点灯しなくなる頃に電球色LED商品がもっと増えて欲しい。

車高を上げてるせいか良くパッシングはされるw 軸は調整してるので多分車高のせいかな それだけ明るいて事かなw

バルブ本体を回転出来るようになっていますが本体と台座をネジ等で固定出来ません。 台座側のギザギザとバルブ本体の突起が噛む事でクリック感はありますが、あくまでも「仮固定」で手で簡単に回ってしまいます。また台座が樹脂のため角度調整等何度か回すうちにギザギザが削れて更に固定が緩くなり、取り付け・取り外しの際に空転しやすくなります。そのため取り付けが困難もしくは取り外しが困難になってしまいます。構造的にはHB3/HB4も同じだと思われます。 IPF社の「エマージェンシーホール」のように双方を同時にロック出来る構造はありません。 私は台座にピンバイスで穴を開け、そこにイモネジでバルブ本体と固定しました。当然メーカー保証は効かなくなりますが・・・ PHILIPS社にしては設計の詰めが甘く残念な商品です。 ※写真に見える台座内側のギザギザとバルブ側の突起が噛んで回転を固定するようになっていますが、角度調整で回したため台座のギザギサが削れて溝が浅くなっています。（現在、取り付けている人は取り外しが可能か確かめた方がいいです）