VEIKOU 6x8FT Greenhouse, greenhouses for Outdoors with Cedar Frame, 6MM Thick Polycarbonate Panel, Green House with Adjustable Vent for Outside, Garden, Backyard

Beautiful greenhouse! Assembly was very good. Great instructions and everything was there. Would highly recommend. If you want vent door to open and close automatically, you need to purchase separate opener.

Awesome kit. Pretty well made. Took some effort to get installed but now is very sturdy. It really holds the heat.

Assembly instructions are clear and there are videos that help. Once assembled, the unit is sturdy and after sealing, really holds heat well.There are however some areas of concern.1: The peak. You must ensure all grooves for the panels line up. There is a small piece of wood glued to the peak board that the rails will screw into. Unfortunately both are centered and when I assembled the back section the board split. On the front section I pre-drilled but the board still split although it did not come completely start. Offsetting the screw holes would help but even better, installing thread inserts into the boards would be a huge help with splitting and with ensuring everything is lined up properly.2: When installing the screws that hold the rafters to the walls you must ensure that the walls are pushed to the interior or the long screws will penetrate all the way through the board and out. A note in the instructions to be cautious there would have helped.3: The steel L-brackets for the bottoms corners are sturdy but the width of the bracket almost exactly matches the width of the wood and the holes for the screws are so close to the edge that the wood splits. I ended up moving each bracket up to get good holds on the middle and bottom holes.4: The roof brackets are very strong and well made but like the bottom brackets are too close to the same size as the wood, leading to splitting especially as the screws are large.5: More of an observation. Adding a couple of vents in the bottom panels towards the floor would greatly improve the air flow which is critical.6: Packaging was well done as well as the marking of parts.

Love this greenhouse! I can't couch for the assemble because I hired a couple of guys to do it but it only took the a day and a half which included the time to lay the gravel and paver foundation. It looks great!

This is the biggest piece of junk I have ever purchased. Over $1000 dollars. The box showed up damaged and was delivered in the rain. The seller said they would not take the items back if they weren’t in the original box…the original boxes that arrived damaged they want strapped together etc exactly how it left the warehouse. Panels don’t add up to size. They also fail to say to remove the plastic film on all the panels so if you installed them already good luck taking the plastic off! Not even one month of it being together and this is the quality. The panel door has split due to the cheap hardware they have used. Do not buy this product. Save your money go elsewhere build your own whatever you want to do but do not buy this.

Overall a great product, however you will need to put on your DIY skills. Here are some tips to help with images associated.- Expect split items, good to have several sizes of wood claps and Titebond II Premium Wood Glue around to fix.- Having longer claps will also help keep panels together and you build out the longer panels. Photo included.- highly recommend to pre drill holes before fully embedding screws, wood is soft and press drilling will eliminate wood splits.- Build a platform to rest and both raise a few inches off the ground to reduce moisture and rot on the base of the greenhouse house over time. I used 4x4 treated lumber. Photo Included-If you do raise and have a gap with exposed floor. Easy to insulate with Garage Rubber base boards. Photo included.-Even thought this is cedar with a coat, highly recommend for all extra wood apply a natural coat of Varathane Premium Wood Stain. This give your Greenhouse a longer lifespan. Photo included-Zones that get snow, best to add another beam inside the roof line as show above. This will provide better load bearing on heavy snow days and reduce your plastic fiberglass sheets folding or collapsing with snow. Photo included- As you build panels, 2x4s at a 45 degree on the floor on each corner makes it easy to screw in screws, again remember to pre-drill holes smaller than the screw to reduce wood splits. Photo Included.- Putting in Fiberglass panels, they can be a little tight. Drop a little tool oil down the channel to help them slide in with easy. It will not hurt the wood, you do not require a lot, just a few drops. Photo product included.- Lastly, be sure to chalk the outside bottoms of the window seals. This will reduce rain water settling in the window exterior tracks and causing rot over time- O’ one other item, when all done go onto YouTube and watch video’s on how to setup your first Greenhouse for growing. Ton of great information for beginners!

The media could not be loaded. You must have tools and building experience if you want this green house. The pre drilled holes didn't line up. Had to pre drill my own holes. Not an easy build but nice when finished. Very sturdy and the cedar smells wonderful.

I have a VERY detailed build video on Youtube if you care to check it out. Look for working in real time and you should find it. Not sure if I can do links here. At the time of doing this review I am still working on editing and uploading videos.That out of the way, this is a very well done kit. The wood is cedar, and of good quality. All holes pre drilled, however some could be better aligned. Think life size Lincoln Log kit. It went together in two days for two people in their late 50's to do. Ours was very straight, we did have some shipping damage on the corners two small plastic windows, but I doubt you could see it now that the greenhouse is together.I would highly suggest this kit, it really is good, it's a great deal for the money and was easy and fun to put together.