Dock Connector for Samsung Galaxy A54 5G Charging Port Flex Cable Replacement for Samsung Galaxy A54 5G A546U USB Charger Dock Board Connector with Tools (Black)

Functions, charges, connects, as it should with no issues. Going strong for months now. Looks almost like factory oem. Install was not bad either. Was a huge cost saver and would purchase again! Shipped and delivered fast.

Well worth it. My phone was barely accepting a charge. But, patiently working carefully with the tools included and a hairdryer. Probably too around 30 minutes. And works perfectly. Be careful with the phillips screwdriver as it is extremely easy to strip the heads of the screws. I also recommend tweezers to carefully remove the plugs inside. And, around 3-4 minutes of a heat evenly spread on the back glass. Get it hot, but not too hot...

This black USB-C dock port fixed my Samsung Galaxy A54 5G charging issue (again). Lesson learned… don’t drop your phone while a charging cable is plugged in… much ;) That’s what keeps taking out the jack on mine. This is my 3rd time replacing the module, and this style port has worked every time. Best preemptive fix it to make sure your charging cable is better secured so your phone does not hit the floor with a cable attached to it :D Compatibility matters… this is ONLY for Galaxy A54 SM-A546U / SM-A546U1 (A546U / A546U1). Make sure you match your exact model before ordering. Install tip… you’ll need to heat the BACK cover around the outer edge to soften the glue (a heat gun works way better than a hair dryer). The flat trim around the camera comes off as one long piece. I used a headlamp because those tiny screws can disappear fast. On mine, a flex/pin board was lightly glued to the old USB-C port, so a little heat helped it lift without fighting it. Pros: • Fixed charging and USB data again right away. • Correct fit for my A54 SM-A546U1. • Tools included and packed well. Cons: • No instructions included… not a deal breaker since YouTube guides are everywhere.

It works, my phone is charging now, whereas before it was not, although it never says "super fast charging" whereas it did before using the same chargers, maybe it's not the board though. This is easy to install if you've got a small screwdriver and a heat gun or even a blow dryer. I'd recommend using a metal pry tool to loosen the glue holding the back panel on, and then cut away, saved me from buying a new phone. **UPDATE** AFTER 3 MONTHS OF USE, NO LONGER CHARGING PROPERLY I HAD TO ORDER ANOTHER BOARD.

Product replaces oem part perfectly and operates as it should in new condition.

The installation was easy.

This product was amazing, I was able to save 60 dollars to do the repair myself and my phone is currently working and charging like new now, would buy again.

Product is good but the tool are easy to break and not good.

La pieza funcionó perfecta para cambiar el puerto de carga del Samsung A54