









🌿 Harness the wind, power your world—quietly and efficiently!
The VEVOR 800W Wind Turbine Generator is a robust 12V wind power solution featuring a 3-blade, 59-inch rotor made from reinforced fiberglass nylon for durability and corrosion resistance. It starts generating power at a low wind speed of 2.5m/s and operates quietly at 58dB thanks to its advanced three-phase AC permanent magnet synchronous generator. Equipped with an MPPT controller, it intelligently maximizes energy output, making it ideal for farms, RVs, boats, and off-grid homes. Note: pole not included.







| ASIN | B0D3T52WFB |
| Additional Features | Super Quiet |
| Brand | VEVOR |
| Brand Name | VEVOR |
| Color | white |
| Current Rating | 800 Amps |
| Customer Reviews | 3.5 out of 5 stars 24 Reviews |
| Engine Power Maximum | 800 Watts |
| Engine Type | wind |
| Fuel Type | wind |
| Fuel type | wind |
| Included Components | Wind Turbine Generator, 3 Blades, Wind Cap, Controller, Sleeve, Pack of Screw |
| Item Type Name | 800W Wind Turbine Generator, 12V Wind Turbine Kit, 3-Blade Wind Power Generator with MPPT Controller, Adjustable Windward Direction & 2.5m/s Start Wind Speed, Suitable for Home, Farm, RVs, Boats |
| Item Weight | 12.2 Kilograms |
| Item weight | 12.2 Kilograms |
| Manufacturer | VEVOR |
| Manufacturer Part Number | 3-Blade Wind Turbine Generator |
| Material Type | Die-cast aluminum, reinforced fiberglass nylon |
| Model Name | Wind Turbine Generator |
| Model Number | FG400W |
| Output Wattage | 800.0 |
| Power Source | Wind Powered |
| Power source | Wind Powered |
| Recommended Uses For Product | Residential |
| Recommended uses for product | Residential |
| Running Wattage | 800 Watts |
| Starting Wattage | 800 Watts |
| UPC | 197988201595 |
| Voltage | 12 Volts |
| Wattage | 800 watts |
C**S
A Great unit for the price
For the price that seems to be an excellent wind turbine, I have used good quality American made wind turbines in the past with great success, but the last company that I was getting them from went out of business quite a few years ago, and I am unable to get maintenance parts that are needed…. so I decided to give a few different Chinese brands a try, the first one I bought for under $100 was an absolute piece of garbage. It didn’t even put out 25W and it was rated for 800. I actually took it off the tower and brought it to my job where we have a wind tunnel for testing airplane wings And I put it in the wind tunnel at 100 mile an hour wind and barely got a little over 108 W out of it before it self-destruct. That is not the case with this VEVOR though. This one, for a Chinese copy, is very well-made . Yeah there are higher quality ones out there but you’re going to pay a lot more for them.!!! I read all of the reviews, and it seems that the majority of people that are having problems with it, have actually never used a wind turbine ever. They are making rookie mistakes that would easily be solved with a Google search of the Internet. The size of the pipe that is used for a mast on this is 1-1/4” Galvanized steel pipe you can also use black iron if you would like but for the extra few dollars you can buy 10 foot sections of galvanized steel pipe that will not rust as quickly as black iron. As I put sections together I step up one size the closer to the ground so the mast gets thinner at the top where the windmill is which is 1 1/4 inches and diameter and the base of the tower mast is 3 inches with reducing couplings between each section. I also use guy wires and my wind turbine is 50 feet in the air. this wind turbine does produce pretty good power. Although the controller that comes with it is a piece of junk. It will not go above about 120W of power before turning the brake on. you’re better off buying a good quality MPPT “wind turbine” charge controller that gives you the ability to set the brake speed and many other features. If you’re unfamiliar with wind turbines, you should probably take some time to educate yourself on the set up and usage of them because they aren’t for everyone, somebody made the comment that you could not use this on a boat. I have one on a relatively small 28 foot sailboat with no issues other than it being a little bit on the noisy side but that is not the bearings or an internal fault, good quality wind turbines will always have a noise or a vibration to them because of the type of generator that is used. Some people also seem to be confused about the wiring, they are under the assumption that it is wired like a house, where you have two hot leads, and a neutral, that is not the case because these generators, in fact, almost all wind generators put out three phase AC power, it is a much more efficient way of making electricity and also using electricity. You also need to use a suitable size wire. If you are using more than 50 feet of wire, you should take care to make sure you get at least a 12 gauge wire because you are dealing with relatively low voltage. You do not want to use solid strand wire m either, a multi strand is best and believe it or not a good quality extension cord seems to work well for wind generators . It really doesn’t matter how you wire up the 3 wires to the controller because it will always work. This wind turbine seems to be pretty good quality, it does not put out the rated power. I bought the 800W one and I see a MAXIMUM of about 600W out of it which is OK. I am not too concerned about that because most wind generators will almost never put out the rated power they are rated for unless you’re in a hurricane. So far, this is on par with the quality of a 400 to $500 unit so as long as you understand about wind turbines and know what you’re getting into. You should have no problems.
R**D
Application only limited by your Imagination.
Mounted mine on a vehicle. Used for camping and in conjunction with a solar panel. Never had to touch a thing the whole trip. Worked day and night. Powered everything from heating pads to cellphones.
M**E
Not very well made.
It makes OK power, might be better if the charger was adjustable, but the bearings are noisy, the blades flex and I had to remove the nose cone because the hole in the hub nut was drilled off center which caused it to shake more than the flexible blades. I'll probably have to replace it with a better quality later.
N**R
Missing
Product that came appeared to have been previously opened but taped up well and was missing the controller not a good start
D**N
Great unit for the price....
Unit did have a little noise when new out of the box. I have had it running for weeks now including 60 mph winds from a storm. It is breaking in nicely and makes good power. Only issue is with the controller that comes with it. Wants to auto break too often in moderate winds. Just get a better more versatile controller to get better usable output. Bearing sounds are a non issue for me after breaking in the unit.
Trustpilot
1 month ago
1 month ago