Sakolla Homemade Popsicle Silicone Molds with Lid,BPA Free Ice Cream Bar Mold,3 Cavities Silicone Ice Pop Mold with 40 Wooden Sticks,Set of 2 (Oval)

I bought these to make my own Keto-friendly frozen yogurt bars. They are easy to fill and insert with sticks. It normally only takes a couple of hours for the treats to be completely frozen. When the sections are filled completely, the covers seaI to the treats well enough to prevent any type of freezer burn. It's fairly easy to remove the treats, once frozen. They wash up well, so they are quickly available to make another batch. It's also pretty easy to find more sticks, once the sticks that come with the set run out.

Excellent product. I used it for cake pops so I can’t comment on any other uses and performance. Lightweight enough to maneuver to make sure it was evenly coated but solid enough to stand on its own in the refrigerator and freezer. I had no problems inserting the popsicle sticks into the bottoms.Once set, the pops peeled off easy and came clean with warm water. Great product!

When I bought these, I was really experimenting with an idea I had for frozen pops. The mold part of the idea worked out perfectly. They come out with such ease. They are very easy to clean and hold the shape pretty well. I’ve only washed mine by hand and not a dishwasher. I would suggest if you’re going to use them to use a cookie sheet under them. Because they are made of silicone they can come out not perfectly shaped because of not being on a flat surface. They turned out great on the first try. Yes I would definitely recommend by these molds. I’m going to buy another set very soon

Just used this item for the first time. I think it'll work fine for my needs. I have a toddler who I absolutely cannot get to eat veggies even the veg/fruit pouches, but she loves icecream, so I used a pouch to fill the mold. I did have to use a utility knife to just open it up enough to fit the stick into the hole I cut (see picture). The design makes no sense bc there isn't a real way to put in the stick so it's positioned where it should be in the middle of the pop. Since I used a thicker mixture, I had no leakage using it thus way and they turned out perfect. They came out of the mold very easy. I popped it out of the top first then pulled the stick portion out through the hole. The lid in the original pic looked like a solid lid, but it isn't. It's just a very thin, flexible cover. It's fine but it does lay directly on top of the popsicle contents. If you use juice instead, I can see how it would become a mess and spread your contents out instead of keeping them where they're supposed to be. Maybe freeze first then add the lid for longer storage. For thicker content, like I did, I used the lid right away and it was fine. Spread it out a bit but not enough that they were mixed. I gave it 4 stars bc I had to cut the hole myself otherwise it's just not useable as a popsicle mold. But I do like it for my purposes. Good product

I carefully reviewed all popsicle makers before deciding on these and it was the perfect choice. I needed to have one that lay flat in my small freezer. I live alone and make fabulous pobsicles about twice a week now (or more). I Can remove one or 2 and put in a baggie if I want to make a new batch in both trays. I have a rubber band to go over the end of each stick to help hold them a bit more level, tho it does not bother me to have them slightly crooked. My recipe made in the original small size Magic Bullet includes 1 banana, 1/3 c. blueberries, some watermelon chunks, a heaping spoon of cranberries, or sauce, raw cacao powder, beet powder, goat milk yogurt, bit of sea salt and some Stevia to taste!. Yum!!! I have perfected this over a few weeks. I have the 2 forms on a small size plastic cutting board just a bit bigger than the trays to carry them in and out of frig. The silicone mold is very loose and floopy so you need something firm underneath.The popsicles are easy to remove, the little trays easy to clean and having this size is perfect for my frig and me, living alone.

Easy to use

I bought two sets of these cause I want to make my own keto popsicles and stock up and not keep buying the expensive eight dollar Keto popsicles on the market. I used the same keto ice cream recipe (Angel619sd on IG) but used monkfruit so they solidify. Don’t do what I did and stack them in the freezer to solidify. They leaked and got stuck. I had a b!tch of a time prying them a part. They need to lay flat when freezing. Other than that, they worked great. I’ll be saving quite a bit of money making my own keto popsicles now.

I bought these because they come with a “lid/cover.” Highly disappointed by the lid because it’s made from flimsy silicone and it doesn’t even fit the molds properly. I thought the cover was going to be made of a hard material but IT IS NOT. The lids do stick well to the mold BUT it’s not enough to latch onto the mold. Another thing that I was worried about these molds is that there are MANY reviews that they don’t come with holes. At first glance it looked like the molds didn’t have holes but when you put it up to the light you can see where they have an opening for the popsicle sticks. Over all the molds are pretty good but the covers are disappointing.

I was skeptical about popping the popsicles out with the way the sticks are but they honestly slide right out. I made “smoothies” and froze them in these and the mold was great. They even supply the popsicle sticks! Just make sure you pop the sticks through to break the silicone before you make your first batch

🍡🤗 Home 🏡 made popsicle OR why I bought it was for separating evenly measuring ice cream 🍦 into portions sized out for equally of flavour & for sharing ⁉️☺️😇😋 With this I can have 3️⃣ different scoops of ice cream 🍦 flavours that aren't in ice cream 🍦 bins ⁉️😦👌🏻😍👍🏻😘♥️ Yum , using this I can eat with out my hands getting messy ,😏 holding a cone ⁉️😇 Some times that is fun , I do like cones Yet I really hate the sticky stress & this comes with 💯 sticks ✅🌟💖 I can make theses ahead of time & put them in baggies ⁉️✅😍😉😌Sealed & ready when I want them , no scooping & then clean up , baggies & sticks can be thrown out ⁉️ 👩‍⚖️ With this I could easily use plastic sticks from a regular dollar 💵 store & re-use them ⁉️😜💖 🤷🏻‍♀️😇🤷‍♀️ At least its ONLY washing a few sticks , they can easily fit through the hole ✅😇🌟😌💆🏻♥️ Making these ahead of time , means no opening & closing each ice cream 🍦 bin , changing quality & freshness ⁉️😇🤷‍♀️♥️ Besides I can then fit them into a rectangular plastic bin , saving room/space having it on the door ⁉️🤷🏻‍♀️ Some ice cream 🍦 bin shapes don't fit ⁉️🤷‍♀️😉💖🌟 Also this will make sure that I don't just leave some small amount of ice cream 🍦 just ruining in the bottom OR corner of the container ⁉️😏 I like the thought that with a little work separating & bagging , I can throw out balky bins & then know what I have left , specially if the rectangular bin I put the bagged ice cream 🍦 in is CLEAR ⁉️😜💖😉🌟😇✅😘🤗☺️👌🏻💆🏻👍🏻 I put off these ideas 💡 for a few years now , I really hope I do it ⁉️🤷🏻‍♀️😌😋 Different flavours of Sherbet ⁉️🍊🍋

Good value for your money. Does the job well. Made keto ice cream bars coated in sugar free chocolate and they were perfect.

All features are fantastic as advertised. However I would recommend the following changes:- the stick caves down at an angle when inserted and the Greece doesn’t firmly hold it down; we’re using an elastic to make it work but a firmer groove would be better;- the seal on top of the case is not firm at the edges; its more like a peel on/off rather than a leak proof seal; some design change there to keep the seal firm will also help;

Work great. Works best for thicker ice cream mixes, probably not so great for watery mixes. Easy to remove.Stackable in the freezer.Holes for the sticks are there, it's easier to push the stick through after the first time.