Vepagoo Car Window Tint Film (35% VLT) Black Universal Fit 7.6m x 50cm Roll | Automotive Protection Passenger Black Privacy Window Tint for Home Blocks UV Rays

Recommend

As expected

This product did not work for me. I tried several different methods and followed the instructions, but after a day or so the film came off of the glass, I was very disappointed

Does what it said on the box

Good that you can chose different density film easy to put on great results

Leave it to the professionals for they know what they are doing.While I have no complaints about the quality of the tint I had terrible trouble trying to get it on to the windscreen. The adhesive didn't like the black dots around the periphery of the screen and just wouldn't stick. I expect it was more me than the product.However, I'm reasonably practical and after a frustrating couple of hour it went into the bin because it just wouldn't stay on the screen. Maybe it was a bad batch..What I can say is the tint and plastic are good quality.

Great, arrived in good packaging no bends

I ordered this vehicle window tint film from the Amazon brand Vepago. I found it difficult to choose which level of tint to choose. The 5% is the darkest, ( I think the 5 percent respresents the percentage of light that actually still gets through the tinted pane) and the 70% is the lightest on option from this particular listing. I opted for 35%; somewhere in the middle. It looks good and as its set to hit 26 degrees tomorrow in April, I am quite proud it is in situ on shed windows that turned a metal shed into a cook pot (well, practically) last year.I've never used car window tint before. I have used in-home, interior window tint ( privacy film) several times. I found the instuctions a little confusing, and I don't have a hear gun to hand. so I just applied it in the same way as I would apply privacy fim, that it, with a water spray, squeegee, and sponge it was slow doing but it wasn't difficult per se; the prick is to remain patient and keep a good eye for detail.I was in the shed today and I am delighted to report it is cool and airy. I also seem to have had a cat move in, perhaps it appreciated the shady nook as much as I did.On the whole I found the film to be good value and good quality. I would buy it again in the future.

المفترض أن هذا التظليل شفاف بنسبة 35% أي نسبة التظليل 65%لكن المنتج الفعلي يبدو وكأنه شفاف بنسبة 80%لا يستحق السعر

I have never tinted before and I did have a learning curve. After about half my role was used up in mistakes I began turning out very good jobs. First of all this tint, as all adhesive tints do, has a clear backing that must be removed before installation or the tint will not stay as some are complaining that their tint falls off by the next day. I can definitely say that this stuff sticks like poop to a wool blanket once dry. I did one window and found a crease I couldn't get rid of. I got back to the job about 20 minutes later to remove the film and try again and I had a hard time removing it as it was really stuck, so the product has very good adhesive once dry, it definitely won't fall off the window when applied properly. Doing window film takes patience and a light touch, if you try to force the job you will mess it up, take your time and you will be fine. Keep your work areas very clean and keep the film wet and you will avoid most dust and dirt particles. Even tint shop jobs are never perfect as the shops will admit it, expect the odd dust fleck as it is unavoidable. You need to be good working with your hands, and have patience and care otherwise don't try tinting. Here are the steps I use to get a great job. You need a squeegee kit and sharp knife (Amazon has some great ones for $20 and they work great). Get a squirt bottle and use a full bottle of water with 3-4 drops of dishwash soap (no more needed that that), Do Not use Windex or any ammonia cleaners. First cut your piece of tint film to rough size of the window being careful to handle it carefully and not crease it. Locate the clear backing side (usually shinier and looks a little lighter that the tint side, but to be sure you can peel back a corner and look). You can use two pieces of tape one each side of the film to help get started when pulling off the backing, but don't do this step yet. Next wet down your Very Clean window and also wet down the clear backing side of the tint film and lay it against the glass, carefully squeegee it flat from the center outwards and trim the film to fit the window. Next remove the film and place it somewhere clean (or have a helper hold it). Rinse down the window well with the spray bottle. remove the clear backing film while wetting down the tint film on both side to wash away any dust (the water won't hurt the adhesive). Apply the window film and position it on the window being careful not to cause creases. It should slide very easy if the window is wet enough (use lots of spray). Again squeegee the film from the center outwards to remove air bubbles and displace the water to the edges. If you notice a large piece of dirt you can lift the film to remove it while keeping the area wet. Continue working out the water to the edges and be patient as the film may look like it wants to lift at the edges, just be patient and keep working over the area checking back every few minutes until it holds down. Gently wipe any excess water from the edges of the window to help the film dry. There are some you tube vids that show more details but the general steps above work. All in all this is very good film in my opinion as it applies well (once you have experience) and sticks well when applied properly.

Really good 👍Better than the cheaper crap I've been buying.

This film is really bad quality. Don't recommend it at all.

Got this for my condo windows, and I am thrilled. You can barely tell there is any film on the windows, but it has cut the heat and glare in my place significantly. Very easy to install, and almost invisible when up.