US-Based Merchant - ICM271 Fan Blower Control Board Factory Certified for Carrier Bryant ICM271C HH84AA020 HH84AA010 302075-3 695-100

Matching with My old furnace Payne blower motor circuit board, shipping fast

As per the instruction & installation manual, page 1:“The ICM271 is a form, fit and functional replacement of the OEM control for the following Carrier/BDP part numbers: 302075-3, HH84AA010, CESO110017, HH84AA011, CES0110018, HH84AA012, HH84AA013, HH84AA020, P771-7002.”I used this to replace the original HH84AA011 in our Payne. Our fan was running continuously, blower relay tips were stuck closed.Great value. Saved myself hundreds (at least) of dollars and kept our 35 y/o furnace running a little while longer. Easy install, probably 10-15 mins to replace once all your covers are off. Take lots of pictures, and go wire by wire if needed. It’s only been installed a couple of days, so time will tell of its longevity. But for now, I'm 100% satisfied.

I used this to replace a 1978 gas furnace control board on a Payne (Carrier) gas furnace. The mechanical relay was failing (it required a hard knock to get it to turn off the fan blower.) I mapped the wiring from the old board onto the new one. The names were pretty much consistent, and the new board had some additional (unused) connectors, but the positions of the connectors were the same. I labeled the wires before removing the old board. The replacement board worked immediately.

Replaced board hh84aa011 which had a fused relay when power company restored power. Works great.

The control board was delivered fast. Took a picture of the layout of the wires and where they plug into. I was able to replace it fast. As soon as I finished, it turned on and everything works great.