Invite Contour Instant Hot Water Dispenser System - Faucet & Tank, Chrome, H-Contour-SS

The product has worked as advertised since I installed it two or three months ago and so far has proven completely satisfactory. Installing it was straightforward for me and should be for anyone with even fairly basic home maintenance/repair skills. The installation instructions are thorough and clear. If you don't have a hole available in your sink or countertop for the hot water dispenser, you'll need to drill a 1-1/4" to 1-1/2" hole. This could be easy or a gigantic, messy hassle, depending on what your sink and countertop are made of, how things are laid out, etc. Or you could sacrifice your pull-out spray hose or soap dispenser, if you have one of those installed, and use that hole. Note that you will need electricity under the sink, either an outlet or a junction box -- everything safely installed and legal, of course. If you don't already have that, getting electricity within the reach of the dispenser's power cord (about 24", if I recall correctly) could be a project unto itself. If you have a dishwasher or garbage disposal installed, you're probably all set. TURN OFF POWER AT THE CIRCUIT BREAKER BEFORE ATTEMPTING ANY ELECTRICAL WORK. The hot water tank itself measures about 6" w x 13" h x 7" d, so make sure you have somewhere under your sink to hang the tank that near the hole where you will install the hot-water tap. Before you go to the hardware store to buy the tee fitting you'll need, check the sizes of both the cold-water supply line to your faucet and the cold-water angle stop (the shutoff valve) under your sink. You might need to buy an adapter or two as well as the tee fitting and some teflon tape (thread sealer) to assemble everything. The hot water dispenser comes with a 1/4" supply tube, either plastic or copper, depending on the model, and a ferrule and nut for a compression fitting. Ask someone at the hardware store who knows what he/she is talking about if you're not sure exactly what parts you need -- there are a million variations, sizes, and configurations, and it can be easy to get confused. I haven't measured the water temperature, but it is definitely scalding hot at the default setting. The product is a luxury and a convenience that I use multiple times a day.

This is so sharp and convenient. Hot tea and hot chocolate water on demand. Really a great add on where that unused soap dispenser used to be next to your kitchen faucet. A must have!

Works great. Easy to install. Appreciate making tea, coffee, and oatmeal fast.

We have had deck mount hot water for over 20 years. Very handy for that cup of coffee or tea in the morning or for instant soup any time. I was disappoints that the package did not include a needed 1/4" tubing compression nut - a 10 cent item. Really folks? Otherwise installation went easy. Too much time to find a 10 cent item however.

Had this installed in my Master Bath sink. It used to take forever for the tap to get hot so this was a great way to get hot water for shaving.

We've used the InSinkErator hot water system for decades. Be aware: the under-sink boxes don't last forever -- we've been averaging five years before they start leaking or otherwise acting weird. The main tank inside is stainless steel which is great, but some of the other parts are plastic and that is where the faults have come. Still, it's SO good to have instant hot water right there handy. My complaint is that I had to buy the faucet too, though my old InSinkErator faucet is still fine. I couldn't buy just the tank unit alone (unless I paid more!). So now I've got a spare & useless faucet in a style I don't want. Not good marketing practice.

Good product

Love instant hot water - we make tea, oats, can boil pasta faster, clean off things with ease. Having one of these definitely improves life. At at least $200 I think it cost, it is disappointing that InSinkErator couldn't spare a little more copper on the length of the water supply line. That issue alone made the installation far more complicated than it should have been. The directions were well written and easy to follow. I understand that these hot water tanks don't last more than a few years and will need to be replaced - from other reviews I've read. I've got mine set to only about 55% of how hot it can possibly get, still too hot to immediately drink - great. My hope is that this might also make it last longer. I've had this tank for a little over 2 years now and no problems so far. It's 2018 Now and this hot water dispenser is still working. I had read a lot of reviews when I bought this that said it doesn't last long. I'm pleased with 5 years! Still looks like new, water trickles from it a couple of seconds after opening the spigot now but it stops. I use it a lot more for cleaning off scissors quickly or warming up a spoon for easier work with ice cream. Changing from 4 to 5 stars for 5 years of flawless hot water!

This is our 3rd unit in the past 10 years. The first lasted 3 years (it was the one with a plastic tank and only warranteed for 1 year), and the 2nd (SS tank) didn't fail, but was showing some symptoms of oncoming problems with the heating unit, and as it was more than 5 years old, we chose to replace it. They come with a very good warranty, but we've never used it, as none have failed within the 3-year period, in our experience. This is so much better than an electric or stove top kettle. We use it every day, for many purposes: tea, coffee, instant soup, baby formula, and getting a head start for anything that needs cooking on the stove top and requires water added. This latest version comes with a really nice faucet, so much better looking than the previous one. Even our parrot likes it better (he loves seeing his reflection in the surface. LOL) This may cost more than an electric kettle, but it's so much nicer and faster.

Replacement and fit perfect installed in 10 minutes I recommend this seller

tres facile a installé et je l'utilise au moin 11 fois par jour de l'eau chaude a porté de main

Works great and was exactly as described but was short a pressure coupling nut and had to go to hardware store and purchase one. Lost 1 hour of plumbers time.

I purchased this unit as a replacement for a unit that was no longer working (the existing unit was well-past its shelf life). It installed easily into the existing space and works just like it should. I would have given it 5 stars but the manufacturer didn't include any compression fittings for inlet pipe so I had to go to the local hardware store to buy some. It was very annoying, and I just don't understand that kind of thinking because there was no way to connect the inlet pipe without the compression sleeve. Anyway, after installing, it's been working great for 10 days now, so no further complaints.