Hollyland Pyro H Wireless HDMI Video Transmission System, Dual-Band 4K30/1080p60 1300ft Los Range 60ms Latency, Up to 4 Receiver, Smart Channel Scan, UVC Live Stream (1TX+1RX)

Awesome product! I recently needed this to walk around a ballroom throughout a live auction and the connection was beautiful! It does need NP series batteries. I had one from a previous camera so i was fine. The battery does not charge on either device if you plug them in with usb c cable. It worked right out of the box. Awesome product.

So easy to use and works very well! No latency issues, etc. Our organizaiton has bought at least 3 more of these sets -- they are great!

Great product, build and visual quality is unmatched for the price. Just be advised of the slight latency as well as the fact that batteries don’t come with it, and apparently there needs to be a difference in elevation for it to work. Other than these it’s plug and play.

(Under the right circumstances) It's a fantastic transmitter and receiver set. I use this to save time spent otherwise running SDI cable to get video from point A to point B. The latency is wonderful. I used this system to set up a countdown timer for an event and there was no delay in the timer, even when the signal was being sent to two sources. It's convenient and easy to use. One feature I would like Hollyland to add for future TX / RX is the ability to switch resolutions, from 1080p to 4K. What it actually does is auto select based on the input, which I had to learn through vague documentation and almost helpful online forums. Definitely rent this before buying - it will not transmit through concrete and may need to be above eye level to transmit properly, so make sure that you know the limits of the system and your building, and don't assume that this system will be the right one for your setup. I also can't quite describe it, but there is a noticeable bit of pixelation flicker on the receiver, like the receiver is struggling to sustain its resolution. It's a slight distraction if you look closely enough. Granted, this system is advertised as a way of getting a preview signal to multiple screens, which is what it does. I am reluctant to say, though, that this system is truly up to par for getting a signal to multiple sources for a programming feed or for a recording. So, I would more likely use this system for camera previews, graphics, lyrics, and animations, but less likely to use this system for camera recordings being fed into a video switcher, a large TV, or a projector.

I was wondering if I could use this for my DJ business, streaming out from a computer to a TV. Not the original intention of the product, but after speaking to the pros at Hollyland they said yes it would work. I can say I used it last night and it worked flawlessly. Very happy with the purchase. I forget if it was listed but the batteries are separate buy. Yes I would recommend it I even bought a 2nd receiver, so I can say 1 transmitter can transmit to 2 receivers. with no issues. and my set up was in a busy downtown area with nots a radio, cell, waves.

Works just as well as our $1500 Teradeck

I was never able to get a signal from DJI OSMO 5 Into my computer. Purchased multiple additional connectors and bits to properly connect and this simply did not work as advertised. Also, does not come with batteries. After 2 days of failure and rented batteries from local film shop, canned the project and returned these. It has been a MONTH and still not been refunded.

Used this for a church event where we wanted to have a camera for IMAG that could be on stage and also go back stage and out into the audience without having to have cables running everywhere. Worked flawlessly and made the event so much more fun. Our max range we were going was probably a little over 100 feet from the receiver, but we were going through several walls and the signal never had any issues. Great product.

This product is outstanding and color me impressed. I use it to transmit 1080p /4k across a 5-6 meter space to a ceiling mounted projector from the AV receiver. Setup for the devices is straight forward, but you will need to adjust the channel used for transmission as channels 1 and 2 are usually rather crowded (I use channel 3). There is no detectable lag as I pass everything including the audio from the laptop to the AV receiver. Also, you can run the receiver from a USB power output on the projector (most modern projectors that have an input for a streaming device). I highly recommend this to anyone wanting to setup a home theater system.

Certainly! Here is a short review suitable for Amazon: --- **Excellent Wireless Video Transmission** The Hollyland Pyro H is an outstanding wireless video transmitter, perfect for professional filmmakers and content creators. It offers a robust transmission range of up to 1,300 feet with dual-band technology (2.4 GHz and 5 GHz), ensuring a stable and interference-free signal. The device supports 4K video at 30fps, delivering crisp and clear visuals with low latency (60ms). Easy to set up with multiple power options, including DC, NP-F batteries, and USB-C, it’s a versatile and reliable choice for any production setup. Highly recommended for its performance and ease of use!

Geen stabile video signal!

Distance was way under advertised, I needed a 1020-150 ft distance covered and it was unable to sync as advertised. I am going to keep it as can use it for other situations but no success for the task it was bought for.

Perfetto e veloci