Omada EAP215-Bridge KIT, Point to Point Wireless Bridge

I bought this to share internet between two buildings on my property that are separated by about 800 feet. Set up was pretty easy and the ability to use the Omada app on my phone to verify signal strength and connectivity was a huge help compared with my previous failed experience in trying to set up a wireless bridge from another manufacturer. I'm still a little bit confused on how the instructions led me to set up logins and passwords on the two wireless units in the bridge, but I got it all working without many issues. Once it was working, it was great. I could achieve full bandwidth at my remote site, matching the performance I could get at the main site (several hundred megabits per second). It was stable and has worked well for us over the first couple months of use so far. I like this system a lot.

Have been wanting to setup my Synology servers in another building for a while. In case the main one burns down, at least my stored data is still safe. (unless the fire spreads across several hundred feet of open air). The setup was extremely easy and took me less than an hour to get it all up and running. I would recommend downloading the manual and previewing it before purchase to see if it will work for you. The spread of signal side to side, up and down was enough so that exact point to point adjustment was easy. Just point it as best as you can. Speed overall has lived up to its expectations. I would also recommend assigning a fixed IP address through your network DHCP server to allow the link to come back up quickly in case the network goes down momentarily.

This was the easiest PTP I have ever used. I am very impressed with how quickly and easily it installed. I shot the signal about half a mile across a lake and it worked perfectly the first try when only lining up by eyesight. It passed traffic immediately once powered on and has been working great for about a week now. The only complaint is that the connections need a better cover for weather resistance. I feel like after some time, water will get into the connections as it is just a snap in plastic cover.

Honestly, couldn't be any easier. No setup...just hook them up. It's working great at 1000ft through a couple of trees (no line of sight). Getting 2 of 3 signal bars, and plenty of speed. I was really hesitant because of the tree leaves, but it's working excellent. If you're looking for a simple solution to send wifi between distant buildings, this is it.

This bridge works well, and range seems good. I'm not at the extended range that it advertises, but I don't have direct line of sight, going through a couple of walls. I though I would have to mount it to the outside of my house in order to reach the barn, but it turns out I can just mount it in the office and it goes through the wall OK. Be aware that you need to use the POE injectors that come with the unit. I tried using a different POE injector, and also a poe switch, and neither worked. Not sure why. But it works fine with the injector they supply. Didn't test the speed, but I've got 2 remote cameras hooked up to it and they work well. Thought about getting one of the cheaper units that has lower bandwidth or shorter range, but for the difference in price I think this one was worth it.

This is a great product. I am able to use strong wifi across my yard in a different building without any issues. I wish it was clear of what cables were needed prior to purchasing but other than that. Thumbs up. Easy install.

Setup was easy except for running the Ethernet cable. We were running WiFi from a larger house to a tiny house. Works great and the WiFi is almost as good as in the house. We replaced a Tp link WiFi extender and I’m really happy with this product. Seems like it will hold up well to wind and all that

This bridge works well and gets great speeds. It comes with the main and client already paired and is essentially plug-n-play and is easily identified by Omada Controller. The bad news is that for some unfathomable reason, Tp-link gave it a POE port that is passive-POE only. No matter what, both ends require two wires run to them, one for power (either ethernet or DC power) and one for data. It does not support active-POE and cannot simply connect to a POE switch like most APs, etc. I'm using it to get WiFi inside a metal-sided barn a few hundred yards away. WiFi won't penetrate metal buildings, so the bridge is on the outside wall connected through the wall via ethernet to an EAP610 inside the barn. Works great, but requires two wires run through the wall on both ends. What were they thinking?

Ótimo produto

Having used the previous generation of these devices, based on the PharOs platform, these work better than I expected. Those Pharos based ones stopped working after about 8 years in the field (literally a field!) and it could have been a cable fault, but as they’re are mounted about 8m above the ground, in a location not easily accessible, we opted to replace them (and the cabling) with these, to bring them into the Omada platform that we’ve been using for the rest of the site for sometime. The build quality is good, although expect the plastic to yellow in the sun, but it won’t go brittle. They use exactly the same mounts and housing as the previous generation, so you could literally just swap the AP out, if the cabling and mount are good. They’re not certified to transmit as far, I forget the exact numbers, but I think it was about 15Km on the old platform, verses about 5Km on the new. That wasn’t a concern for us, but could be for others. The setup of the devices was a piece of cake, we installed the Main AP on the main building where the Controller is situated, and the client one at the other building. Once the client AP was powered up, using the in box PoE adaptor, they automatically paired and began working. The speed is nothing to write home about at only 800Mbps, but this is 10x the internet uplink, and only needs Kbps to function as intended. All in all they provide great value too, as you get two APs in the box, preconfigured, whereas with the previous generation, they were about 3/4 of the price, but you only got 1, and had to install software to configure them. These are also part of the Omada platform, so you get all the benefits you would expect from using that platform. In addition, the bridge APs also functioned as client APs, allowing devices to connect if there wasn’t a better positioned AP to handle the traffic.

Se compró esta antena en diciembre y se instaló en el mes de febrero, de inicio funcionó muy bien después se desconectaba con frecuencia y ayer después de 5 meses de uso una de las antenas ya no prendió, mi pregunta es aún tiene garantía con el fabricante ?

These devices are awesome. Super affordable, easy to configure, weather resistant and fast. I've installed mine in a heavily-forested rural area about 100 meters apart with excellent throughput and extremely low latency. They've been subjected to heavy rain and snow without skipping a beat.

Fitted and turned on. Set it up and it worked. What I was looking for. Great coverage in the garden now.