For Flipper Zero Modification Module,2.4G Module Expansion Support Nrf Sniffer/Mousejacker,for Flipper Zero Cc1101 Module, Wifi Multiboard Development Board for Flipper Zero Attachment Accessory

All the modules work great, however there are no instructions, so I'll provide my findings.The NRF24 and CC1011 work right out of the box, but as usual, you need to flash the ESP32. Here's how I did it.1. Put it in the ESP32 mode, which is the middle selection2. Went to Fzeeflasher.com3. While your board is not connected to your Flipper, hold down the "BT" button and connect it to your computer.4. On the website, click the "Connect" Button5. A window will pop-up and ask which device to connect to, choose, "ESP32-S2"6. Once connected, at the top drop-downs, choose, under model, "+KOKO MARAUDER, ESP-S2 (SD CARD)" and the current version and for firmware, "Marauder"7. Then click program. (You may need to Erase it first)8. Once completed. Connect it to your Flipper9. On your flipper, you should already have your alternate software (Momentum, Xtreme, etc...)10. Go to the GPIO section, Then ESP11. Find the ESP Flasher, and select it.12. Choose Quick Flash, then "Wifi Dev/ RL S2/ Xeon13. Done and should be working!Good luck and happy hunting.

This module didn't work. There is no technical support, no manual or any link. I would like to know how to use it, there should be help for that. Video, manual, something. Thanks

you need qflipper and to download the flipper zero wifi dev board files from github for the esp32v2. use the boot app 0xE000 for the marauder. install them onto the flipper using qflipper in a folder for maurader and evil portal. Then use esp flasher for bootloader, partition table, boot app0, firmware a (marauder) and firmware b (evil portal). Then switch to firmware b and flash only the partition table to firmware b because you already have the boot for firmware A.its a pretty simple install. there are 4 sets of files for marauder on the git hub page:1) ESP32 Marauder v4, v6, Kit, Mini2) Flipper Zero WiFi Dev Board3) Flipper Zero Multi Board S34) WiFi Dev Board Pro/LDDB/NodeMCU-32S/ESP32 Wemos D1 MiniYou have to use number 2 for the board to work.

Awesome development board, has many functions. I also like the switch that changes from red to green to blue, NRF24 to ESP32 to CC1101. Also what does RT and BT do? Are they Reset and Boot?

Spent 3 hours trying to flash this thing. To no avail.

Don’t work

Tried flashing it try rebooting it nothing works

Everything works and looks great