Hyte Y70 Modern Aesthetic Gaming PC Case - Panoramic Glass | High-Airflow Design | Cable Management | Dual Chamber ATX Mid-Tower Chassis | 10 Fan Capacity | Luxury PCIe 4.0 Riser Cable - Snow White

This is a beautiful case in all white. The is more than enough room for just about anything you want to put in there. Even with a vertically mounted 5070 ti, there is a lot of extra space left over, giving the final result a nice open feel. That said, it's a large case - make sure you have room for it at close to 13" deep. There a several things that made this the easiest build I have done. Aside from the interior size, the dual chambered design makes cabling easy and keeps the front side clean-looking. Additionally, every bracket, screw hole and snap connection matched up perfectly with overall fit and finish being near-perfect. I have six intake fans and four exhaust fans, including the AIO cooler for plenty of airflow, though on the down side, the slatted exterior covers probably restrict the airflow to some extent. One other concern is that it will be a tight fit to get even one low-profile pci card in along with the gpu and pci riser. Not an issue right now, but possibly in the future. The case does not come with any fans, though given the range of fan choices and options, included fans probably be not what the user wants anyway. The case is not inexpensive, but I think worth the cost. It is heavy also, but built very sturdily.

I adore this case! Yes, it's definitely a luxury case as it's pricier than others, but this version does have the 2k screen included. The glass is tempered and I didn't have any issues with it cracking or scratching during the pc build. The bottom compartment does fit three fans, just know you need to fit one inside the case before attaching it to the bracket to make them all fit. As far as the screen goes, it's a beautiful screen, do note, you need to connect it directly to the motherboard for the picture to work and download the software so you can set your picture/widgets. The cables to hook it up are already ran to the back of the case when it arrives, so you'll just need to hook them up to your motherboard and power supply. The top of the case does have a compartment that lowers if you want to mount fans or your AIO closer to your motherboard. Do note, this case includes a PCIe riser 4.0 to connect your GPU to your MOB so the GPU sits upright in the case. IF you need a 5.0 connection like I did, you'll need to purchase the 5.0 riser off Hyte's website, at the time I purchased, they were $99 and you can choose which color you'd like. The case has plenty of places to route your cables for easy cable management as well as preinstalled Velcro in the bottom to hold some of the cables. The only downside I saw was needing to buy an updated PCIe riser, I wish they would have had that as an upgrade option at purchase, as well as there being two open spots on the back of the side where you mount the GPU etc. I'm assuming its for easier access, but I do worry about the amount of dust etc that allows into the pc, though I'm sure it's great for airflow.

⭐️⭐️⭐️⭐️⭐️ – One of the Best Cases I’ve Ever Built In I’ve had the HYTE Y70 Touch Infinite Dual Chamber ATX Case for about two years now, and honestly, it’s one of the best PC cases I’ve ever built in. First off, the build experience is incredibly smooth. The dual-chamber design gives you tons of room to work with, making cable management clean and stress-free. Everything feels thoughtfully laid out, so even more complex builds come together easily without feeling cramped. Compatibility and size are a huge plus. This case easily supports larger GPUs, multiple radiators, and high-end components without any issues. Whether you’re running a high-performance gaming setup or a workstation build, there’s more than enough space to work with. One of the standout features is the built-in touchscreen, which is honestly amazing. It adds a completely different level of customization and functionality—you can display system stats, animations, or anything you want. It’s not just a gimmick, it actually enhances the overall experience and makes the build feel premium. Installation overall is very straightforward. Panels come off easily, parts line up well, and the modular design helps speed things up. It’s clear this case was designed with builders in mind. Price-wise, it’s definitely on the higher end, but after using it for two years, I can say it’s absolutely worth it. The quality, features, and overall experience justify the investment. Pros: • Extremely easy and enjoyable to build in • Spacious with excellent compatibility for high-end parts • Dual-chamber design keeps everything clean and organized • Built-in touchscreen is a standout feature and works great • Premium look and feel Cons: • Higher price point, but you get what you pay for Overall, if you’re looking for a high-end case that combines performance, aesthetics, and innovation, this is a top-tier choice.

Show-stopping touchscreen display adds flair and functionality most cases don’t offer. Massive internal space & cooling support, great for custom water-cooling builds. the app was slow, memory-hungry, and occasionally forgetful, making the touchscreen experience less smooth than anticipated. If you want something that stands out visually and adds a new layer of interactivity to your setup, it’s one of the few cases that delivers on that promise. The hardware design and cooling support are excellent for high-end builds. However, if you prefer a straightforward, no-nonsense build or care more about pure performance than showmanship, you might find the touchscreen feature a bit gimmicky, especially given the bumpy software experience. This isn’t just a gimmick — it can display real system information and interact with apps — but the software side still needs polishing and can be heavy on RAM or laggy with more complex widgets. The HYTE Y70 Touch is a premium ATX mid-tower PC case that stands out primarily for its large integrated touchscreen, along with a spacious dual-chamber interior and strong cooling potential. It’s designed for high-end systems where aesthetics, display integration, and build showcase are as important as performance.

This has been my dream case for the longest time now! I finally did a big pc upgrade and I was super excited to make a hyte build. I thought the glass panels and regular panels would be hard to remove from the case but it's super easy to pop off ( and I have long nails ). The case is a lot bigger than what I thought it would be but I love how spacious it is, it makes it super easy to build your pc in. I was also surprised to see it had a section at the bottom of the case for fans so I might add some down there later on. The case filters out dust well and makes it super easy to clean when dust builds up in the filters. Like I said before it's so easy to remove the case panels cleaning your pc is not a chore, you can easily pop out the panels making removability easy. I definitely think it's worth the money, I'm so in love with the touch panel I use it mainly for discord and Spotify and I just love how the case looks! And because it's so big air flow is great and the pc itself is very quiet.

This is the best case I have ever bought. It is absolutely worth every penny spent in my opinion. It's dual chamber is wonderful giving lots of room and options for cable management. Now I do not have the beafyist of graphic cards but I am rocking a 3080 and it fits in this case wonderfully being vertically mounted while still having more than enough room for my 2nd nic and having my rad for my cpu cooler mounted on top of the case. I also absolutely love not only how the case looks asteticly but also how the case for the most part is tool free, meaning there are no tools needed to pop off the top plate cover back panel and the larger glass panel, the other 2 smaller glass panels do require you to take out some screws that are holding them in place but it is pretty minimal. For any other parts on the case that can be removed like the bottom panel or the panel on the top under the top cover plate also require you to unscrew some screws but again it's minimal. I have not used my PC to much yet since I got this case but I have tested the pc just to make sure it turns on and all fans are working correctly, they were. I mainly bought this case to have better airflow and more fans to help keep my PC parts as cool as possible. This case supports up to 9 or 10 fans But be aware depending on how many fans hook up spots you have on your motherboard you may need a fan spliter cable or a rgb fan controller box, I needed both. Also be aware that this case does NOT come with any fans. I got lucky and thankfully had enough fans to fill the case to what I wanted. Small update: i recently tested my temps in this case by running a benchmark on both my gpu and cpu, the test went well as the temps for both my cpu witch is a ryzen 7 7800X3D and my gpu witch is a 3080 were all well under anything dangerous. I also played a game for a little bit as well. CONS: Honestly there is not much, the few I can think of are nothing major and it's me just really nit picking. But if I had to list some that bug me the most I'd say the riser that plugs into your motherboard for your gpu to be vertically mounted was not my favorite thing to plug in, it was just really scary and I had give it a bit more force to get it to plug in all the way. The other thing that's not the best is where you mount your fans on the bottom of the case, while the location is great it's the plate that you are mounting the fans onto that is not so great. The plate has a bunch of different pre-made holes on it for you to pick what ones to screw your fans into, now it's nice to have options but unfortunately it can be very difficult to mount 3 fans at the bottom if the shape of your fans are a bit on the bulky side. I was only able to get 2 fans on the bottom as a result. The last thing I do not care for much is how you mount a fan to the back end of the case, it's more than double but it can be a little tricky to not only get the fan where you want it but also make sure you can get all 4 screws in the fan. This is due to the back end of the case just having these little slots instead of actual pre-made circle holes. OVERALL: This is a absolute gem of a case that does a wonderful job of showing off your pc build that you just spent hours putting together while burning a hole in your wallet.

The Hyte Y70 is a distinguished computer case that effectively combines aesthetics with functionality, making it a notable option for building a visually appealing and high-performance personal computer. Its sleek design features customizable RGB lighting, allowing users to tailor the lighting according to their preferences. The tempered glass panels enhance the case's elegance while providing a clear view of the internal components. The thoughtfully designed interior facilitates efficient cable management and accommodates a range of components, including longer graphics processing units and multiple cooling solutions. In terms of airflow, the Y70 promotes optimal cooling with numerous fan mounting points and a straightforward installation process for additional cooling options. The case also offers significant versatility in storage, permitting the installation of multiple hard disk drives and solid-state drives, ensuring ample capacity for data and applications. While the price point may be higher than some alternatives, the Hyte Y70 represents a worthwhile investment for those who prioritize aesthetic appeal and build quality. Overall, it is a well-engineered case that successfully combines style and practicality, making it an excellent choice for high-performance gaming setups. The Hyte Y70 case does have some compatibility considerations to be aware of. For instance, it supports graphic cards up to a certain length, so if you have a particularly long GPU, you should check the specifications to ensure it will fit. Lastly, the space for hard drives and solid-state drives may also be limited by the number of available mounting points. Therefore, if you plan a setup with multiple drives, it's advisable to verify that there is adequate space for your needs. Additionally, it becomes very heavy after installing all the components.

I’ll change my review. It’s a good case. It is absolutely massive! It IS the guy your girl tells you not to worry about. Fkin huge. Great airflow though. Like top tier. No case fans!!! None! Not one!! Be aware, plan for it! Plenty of tie downs for cable management. It comes with like 10 zip ties that are really old and break super easy.(so buy zip ties) It comes with like six, four inch Velcro strips. Good quality. And super easy to access panels all over it. There’s no excuse for your build to look booty with this thing. Uhhhhh…. Yea. That’s about it that isn’t summed up with pics and videos found online or in the description. Oh it comes with plenty of back up screws and some of the latches it uses for the panels. Yea solid case. No chipped paint or anything.

الكيس حجمه كبير ويجي معاه قطعه تخلي الكرت بالجمب هذا يعطي جماليه و تبريد افضل لكرت الشاشه وشكله جداً جميل الصراحه..

Great look Cooling is also good Worth buying for asthetic gaming setup look

Very spacious and easy to build in while also looking amazing, the included fans are pretty good too and the gpu wire thing (not sure the actual name) is so high quality it’s great. Comes packaged very well no damage when I revived it honestly the best case ove bought well worth the value.

Enough space, cute and looks really nice

Boîtier assez coûteux mais je trouve qu’il vaut son prix , ce boîtier est excellent jusqu’aux détails et on peut dire qu’il est très spacieux ! Je recommande pour son style unique, sa beauté et sa qualité.