Plague Doctor Bird Mask Long Nose Beak Raven Masks Prop for Halloween Steampunk Cosplay Costume

Nice. Thin material, but looks great. Comes folded and you need to pack the point of the beak to keep it "open." when I don't, it returns to its flattened state (because of the way it's sewn) and then it "turns." Fit: the face fits over mine just fine, the straps adjust to fit my fat head with buckle holes to spare. Eye pieces: are clear plastic and yes, they fog. That's expected...and is why I bought a 40mm fan with USB connection to power it by a charger bank. I'll mount that fan inside the mask, pointed up to blow onto the eyes. The double row of grommets along the bottom will draw fresh air into the beak and it'll be fine.

OK, I was a bit skeptical about ordering this mask for just a joke to wear to work a couple of times... I mean, I could have bought the $14 one, but for $10 more I thought I'd get a little better one. Glad I did. First, I'm not sure what mask some of the reviewers received that gave this mask such low marks. Yes, it is not real leather, but a fairly thick like Naugahyde (I'm showing my age) that looks like leather, kind of. It did not smell bad even when I first opened it like some people complained of. Yes, it came flat packed, but the mask opened up and held it's shape without the paper towel stuffing in the beak that some said they had to do. The eye lens are fairly easy to look out of, but like a bird's view, they are not facing straight forward, but rather on the sides of the head... yeah, like a bird. I imagine wearing this for a long time would be hard because your straight ahead view is blocked by the bird beak. For fun I even tried it with my glasses.... which is pretty much a no-go. My wife who; a) hates Halloween and b) dislikes masks/dressing up etc. said "Wow, that's scary as hell, and looks pretty well made. OK, pros and cons of this mask. Pros... *The cost is OK for something I'll probably only get a few wears out of before I give it away to my daughter *this material looks like shiny leather and is thick enough that it hold the shape of the bird beak really well. *the little metal vent holes along the bottom do give some ventilation.. *the eye lens are pretty easy to look out of... I don't think I'll replace them like some people suggested *the straps also have a top strap which helps support... some cheaper masks only have a single strap *this thing is actually stitched together, and has metal grommets which adds to the quality look. *OMG, that thing shipped to my house in less than 36 hours. Cons..... *I have a slightly bit larger head than average... and this fits OK, so a young teenager might fit OK< but a "big boy" lugger head might not fit this well. *Not the easiest mask to look out of.... the lens are slightly tinted and they are mounted on the side of the mask, so looking forward is a little challenge. *I imagine this mask, like all full face masks will be hot to wear and steamy with your breath trapped in the mask.... along with the traditional garb that is a long coat and a top hat of some type.... or a hoodie. *It's made in China...… but what isn't now days (there probably are some USA made for $150+) Would I buy this again? .... NO, ha ha ha.... because I got one which is enough..... but I'd tell my buddies to buy this one so we could flock together. I'm glad I bought this one though. Actual pics of me... 99F outside disclaimer; this is NOT a mask or face barrier adequate to protect against COVID-19.... If you are so inclined, just wear a surgical mask underneath it if you are going out and about.

So I previously went to the nearest Spirit Halloween to look for a plague doctor mask. All I could find were masks that did not feel good or didn’t cover the full face. So I decided to look on Amazon for a mask, and I found this mask. Comfort ability: Fantastic I really love the material that this is made out of. The mask is made out of a leather like material, and is super nice to wear. I could wear this forever Wear ability: Great The mask is great. The strap for it is like a belt buckle which makes it perfect for adjusting to your head size. It’s also easy to take on and off as long as you're wearing something to cover your hair. Looks Good: Awesome The way the mask looks is awesome. The black on the mask is dark, it also has metal dots on it which makes it look way better. It has some breathing holes on the bottom, but it does not take the look away. The beak for the mask is not too long but long enough for it to look cool and not be in the way. See-ability: OK The glass looks awesome, because you can not see into the mask but seeing out looks like looking out a window. It also covers up some of your peripheral vision which is annoying but still easy to look out of. There is also another problem and that's when walking around outside is that the glass gets foggy. I just fixed this problem with an anti-fog spray and it worked perfectly. Overall I love this product. It is very comfortable. Easy to put on and take off, and looks fantastic. This was a great buy especially for $20.

This mask is of better quality than I expected. It is not real leather, but it is excellent quality faux leather. Looks like it cost far more than $20. I have a small head and I have to adjust it to its smallest setting to fit, but once I do, it fits like it was made for me. Visibility out is excellent. Being able to breathe in it is not as great as I would like, but it is ok. If someone is claustrophobic at all, I don't think they would be able to tolerate this mask. It fits tight against the face, as it has to for the design. It goes above the eyebrows, down around the cheeks and under the jaw/chin. If you do a lot of talking, the eyes want to fog up on you a little, because it really does seal up tightly around your face. Air gets in and out through the grommet holes on the bottom. I did have to ball up a paper towel to get the beak portion to fill out and maintain its shape. Would recommend.

I bought this more as a joke during the current virus crisis, realizing that in fact, a filter could be put into the nose cone, to filter the air being inhaled. It can't be any worse than cloth masks which serve little function in keeping out small droplets. That aside, I had read a few bad reviews about cracked eyepieces and fit. Mine arrived fully intact, nice and clean, and looking great. I should mention that at 6'6", I have a larger head than average. I was worried about the fit. Yes, it could be a bit bigger to provide the perfect comfort for me, but as it stands, it works just fine. I just had to play around with the strap, and placement of the mask. Once set in place, it works well. Also, while it seemed like it wouldn't work that well, the eyehole placements are just right. If someone is expecting perfect vision, then they don't comprehend how masks work. LOL!! The way it is, I can see fine, better than expected, with no distortion. Going back to the complaints about cracked plastic eyepieces... if you have any ability in crafts and such, I would recommend removing the plastic circles, and replacing them with glass discs - making absolutely sure that you have them held tightly in place. I think that could provide better viewing as well. And another idea I had, but haven't tried yet, is to attach a small battery-powered LED light at the top of each eye-hole, taped on to keep out light bleed-in, to make the eyes "glow." There is quite a bit that can be done to upgrade this mask. But as it is, it fits great, looks really nice, and is a fun thing to wear to various events or "just because."

Very nice quality and looks amazing! But it just doesn’t sit right. The beak part of mine was crooked/bent slightly when arriving. I put something inside to try and keep it pushed out and make it look right. I left it for DAYS. Just for it to stay looking like that. The other one was right but still ruined our costumes due to mine being messed up. As well as it’s VERY HARD TO BREATHE IN! I had to take it off so many times just to see and breathe. The mask got all foggy in seconds! I’d say it’s useful for pictures and only that until it’s a little more breathable.

Fits well over my face even with my beard. 3 straps in back. On the left is the hole punched one, top is the looped one to run the left one through, and on the right is the buckle. Easy to get a good fit and tighten. Easier when you have someone help you ;) Controlled breathing is key in any mask but read below for work arounds. DONT STUFF THE BEAK! Many review say "stuff the beak to make it look full"... Don't and here's why and how to fix it. If you stuff the beak you block the breathing vent holes in the bottom. Not only is it uncomfortable to have restricted air flow, but it also makes the lenses fog up significantly more. Solution = bend the beak downward and crease the mask at the cheeks. It's flattened vertically, so you just flatten it horizontally to widen it out. It's faux leather so it only took about 5 minutes of me putting a book on it for it to take shape. If you are a hardcore mouth breather and still get foggy lenses, there is a thing call anti-fog solution. Or you can just get a bar of soap, wet your finger with a few drops and rub the soap then rub that on the lenses. Swirl it on the lens until it dries up then buff out the dry soap. That buffed soap barrier stops moisture from accumulating and obstructing your vision. I'm 6' tall with what I would say is an average sized dome. I don't have any health issues so I can breathe through my nose with ease. Your mileage on size may vary. But if you follow my simple advice of creasing and soaping, you will have a great mask with no issues.

Bought it for a Halloween party at work and it was awesome, after a couple modifications. 1: You gotta stuff the beak. I used a couple paper towels at the end, worked out any lumps that showed on the surface and it was fine. Otherwise this things natural state is flat, so that's what it's gonna do. 2: The lenses WILL fog up, period, especially if you're wearing a balaclava under it(as any good plague doctor custom demands). My solution was to cut half-inch vents into the underside of the beak, in-between the holes that are already there. 3 on each side were enough for me, but you may want more if you're a heavy breather. I would also recommend taking a black marker to the edges of the cuts, as the light gray of the inside of the material will make the vents obvious in the light. Also, even though the eyes don't face straight forward, you still have decent front visibility, but expect a blind spot directly between your eyes. You'll have to tilt your head to get a better look at things, and your peripheral vision will be out of your opposite eye if you don't move your head(you'll be using your left eye to look out the right lens and vice versa). However, I found that those head movements end up looking very bird-like and add a LOT to the effect of the costume. The mask gets the job done nicely, couldn't ask for more at this price point.

Higher quality than I expected. Well worth the delay in production that it had (was on back-order when I placed my order). Perfect mask for these Covid-19 times.

La calidad es excelente, se ve super bien con la máscara puesta, se empaña un poco pero no es mucho problema. Está padrísima y ya la quiero probar en las fiestas

This item was ordered late, but delivery was super fast and well in time for Halloween. I’m very pleased with the product. It’s well made and the material is thick but flexible. Fits very comfortably too.

Good

Die Verarbeitung ist super und die Passform kann super eingestellt werden