⚙️ Elevate your 3D printing game with precision and speed that your Voron community will envy!
The FYSETCVoron2.4 Tap Kit OptTap V2.4 RC8 is a high-performance 3D printer accessory designed for Voron V2 and Trident models. Featuring an upgraded Omron EE-SX398 optical sensor with 0.4μm accuracy, premium ABS printed parts, and a robust MGN9 rail carriage, it offers ultra-fast, reliable nozzle-based bed leveling. Its heat-resistant design supports operation up to 100°C and a flexible 5-24V input range, ensuring durability and easy integration without complicated macros.
F**L
Use loctite or similair
When I installed it I got a standard deviation of 0.0000 a few dozen print hours later I was having first layer issues turns out thread locker of some sort is really important but that's my fault I was just lazy
K**A
Throw away the printed parts
The printed parts are trash. Terribly under extruded. The rail carriages are missing balls so they dont slide smoothly.But that's not why someone should buy this.It's been proven that the printed tap is better for high speed printing than the CNC tap. Stiffer action is better? Maybe maybe not time will tell if I regret not returning this...Reprint the parts and you have the tap upgrade with 2 day shipping... For 30 smackers...
D**N
Poorly printed parts, stuck rail
Screw holes don't line up. Magnet inserts don't move freely or sit as deep as they need to. Surface finish is subpar.Update, kit is unusable. The rail used with the kit was super stiff even after taking it completely apart, cleaning and regressing. It took so much force the printer head would not come down after tripping the sensor
F**O
Printed parts are OK, but they sent the wrong one
The printed parts are of decent quality, but they sent two of the same "Tap_Center_right" part. So, out of the box, the product is unusable, you will end up printing parts for it anyway. And of course, I noticed this after I already had glued on the magnets and added the heat inserts...The packaging was good, and yes I have a ruler, and yes this is a Voron project so you most likely know about hardware, but putting some labels on the bags of hardware would've been nice.EDIT: I changed the overall rating from 1 star to 4. The seller contacted me and made things right. Great customer service.
A**D
Really no good at all.
They don’t give you the correct connector for the LDO toolhead board so you’ll need to have the wire end pins and a new connector or take it off the old sensor. The printed parts are pretty bad quality the belt clamping part that the new vertical rail connects to won’t even hold 110hrz of tension on the XY belts so you can use it, they must also be using an old design because they belt has nowhere to fold back on itself. Either just print your own parts or better yet buy a CNC version.
D**A
Complete tap kit, printed parts are terrible
I only bought because I needed the hardware and PCB to use for boop so didn't need the tap printed parts, which is good because I wouldn't trust them. The PCB was the current version and the included rail was a good preload and feel once it was cleaned and greased.
Trustpilot
1 week ago
3 weeks ago
