🎯 Hit the Bullseye Every Time with Wicked Precision!
The FSFF 3-Blade Carbon Fiber Razor Dart is a high-performance dart designed for .625 caliber bore blowguns. With a razor-sharp 0.84” blade and a length of 9.75”, these darts offer unmatched penetration and accuracy. Each pack contains 12 darts featuring a high visibility neon orange cone for easy tracking. Engineered for durability and effectiveness, these darts are perfect for both hunting and target shooting.
M**H
LETHAL!!!
These things are LETHAL! Compared to the standard cold steel broad heads these are way more efficient as dispatching small game!Quick & humane compared to smaller broadheads!Get them!
M**S
Solid creation.
Excellant hunting darts. Heavy, sharp powerfull momentum force
T**S
Get them!
If you have the CS Big bore blowgun this is a MUST. Easily the straightest flight you will get from any dart other than bamboo. These shoot pretty flat but you gotta REALLY blow! If you think you can blow harder, you didn’t blow hard enough. Well worth the money. Well built. Easy to sharpen.
T**T
Excellent
Razor sharp. High quality. They shoot very well and cause a lot of damage.
Y**
No More Iguanas!
These are great for Iguanas!
M**A
Dull for the cost but a decent addition
The media could not be loaded. For the expense I would expect better quality and sharpness. They aren’t bad, but out of the box you will need to sharpen them because they are quite dull. The points are sharp but the blades are not at all. Check my video. I’m putting some pressure on the blade and it didn’t even break my keyboard finger skin. They are also light weight and this is both good and bad. The good is the distance and speed is better but the bad is they have less inertia to deliver a powerful punch. If the blades were razor sharp then I don’t think that matters. But they are dull and you will need to sharpen them to make a better dart.All in all, I do like them but for this price I would have preferred a better dart which means sharper. I am keeping them and I will sharpen them as well.
C**L
Awesome dart
Sharp and fast! The squirrel wasn't fast enough!
T**K
Final sharpening is likely necessary, on the offcenter heads.
While the metal seems to be quality, holding the edge quite well, the edge is rough, since no attempt to do a final sanding of the blade surface. By the level of the visible surface of the blade edges, I would guess six to eight hundred grit sand paper was used, rather than something better to put a smooth edge on the blades. I also failed to find one tip that is properly centered, with one side or another ground further into the center that the other two sides. This makes me question if flight aerodynamics are impacted. The failure to center even one of the heads makes me question other aspects of quality control that might have been rushed, or ignored, like the welds on the tips failing.
Trustpilot
1 week ago
1 day ago
