DUROCK Stabilizer V3, Screw in Stabilizers with 2u 6.25u 7u Wires, PCB Mount Keyboard Stabilizers for Mechanical Keyboards (V3 Smokey Black 80% Kit)

Nice stabs, ordered clip in ones on accident made by another manufacturer prior and these really are better quality and fit. Look great, feel amazing on my Libra Mini kit I built out, seem very durable for what they are as the previous set (different manufacturer) I had the wire bar clips bent multiple times when trying to install the stab bars. Typing on them is great. Color options are awesome as well, I went full transparent as that's the "color" of my keyboard as well. I am sure if it had LED's the brightness would be perfect as well with these puppies.

These are not bad stabilizers. If you have to have stabilizers, and anything 2u and up, you do, you can do a lot worse. These come pre-clipped, saving a few moments with flush cutters. They come with thin film stickers to put under the housings, saving time trimming up band-aids. Their tolerances are tight enough that a thin coat of dielectric is all you need to keep the wires from rattling in them, saving the trimming and tweezer work of a holey mod. They even come with little rubber bumper stickers that if you manage to get them lined up, will ensure that even if the wire is a little warped, it won't rattle on the PCB. All great things that go a long way toward eliminated the hassle and irritation that you would otherwise battle in tuning the sound of a keyboard. You still need to bring your own lube for the slider and housing and your own grease for the wire for maximum smoothness and protection from rattle. The one thing that concerns me is that the translucent plastic is obviously more brittle than the opaque stabs I've used in the past. It's the nature of thin, rigid translucent plastics. I don't think it will result in failure for the life of the board now that they're installed, but it does make them feel less sturdy and it makes snapping the wire in place feel like you have only one or two tries before the clip will break. If you can, I'd recommend favoring simple opaque plastic as it tends to be a little softer, and you're almost never going to see them anyway. I only ended up with translucent ones from impatience.

I purchased these to replace the "bargain" (read: garbage) PCB clip-in stabilizers that came with a 60% keyboard kit. They are rock steady and with a sparing application of Super-Lube [https://www.amazon.com/gp/product/B0081JE0OO] they are functionally silent. I can't detect any scratchiness added by the stabilizers. It was nice to see the inclusion of bar and housing dampening pads. I was disappointed to discover that while they included a couple spare washers, they did not include a spare mounting screw. Keep an eye on them so you don't misplace one for 20 minutes. The Good: - Better than average PCB mounting stabilizers - Black stabilizer bar - low noise when lubed The Bad: - No extra screws

I put these in my new keyboard, and I love them. I have yet to have any issues, knock on wood. They sound great and feel even better.

I put these on my GMMK 2 which have notoriously bad stabilizers. They were scratchy and rattling around like crazy. The screw in stabs are a pain to install, but they are well worth it. No more scratchiness, no more rattling. Make sure to lube the stabs as they do not come lubed from factory. One thing worth noting for anybody interested in these stabs for any Glorious keyboard, chances are the housing won't fit the top plate, so I sanded down the cutouts on the top plate for them to fit. I saw some people say Glorious updated the top plate to fit standard stabs, but not every board is shipped with it. Not Durock's problem though, this is Glorious being money hungry and wanting users to purchase their own screw in stabs to replace their terrible factory ones.

I couldn’t use it for my keyboard. Seen Reddit pages you could use these sadly I couldn’t figure it out. Possibly more mods I need. But giving it five stars because the quality, feel, design, value of money is all there for the product. Sadly, I couldn’t set it up because of my keyboard.

I lubed them and they sound great.

No complains at all. I've heard a lot about Durock stabs over the years and they live up to the hype. They make my keyboard sound amazing and totally worth the money.

Habe diese purple durock bestellt und bekomme smoky durocks zum clipsen.. kenne ich nichtmal und kosten einiges weniger als die purple. Schade wieder mehr arbeit gekauft als gewollt.

Have used V2s many times when included in kits and they’re good. These ones come with pads for wire and housing and after thinking they would add no value and be a pain to install I was proved wrong. Made a big different to sound and feel - really improving the action on 2u and 7u keys. They were however a bit finicky to install -but worth it

かなりしっかり潤滑しないとスペースキーなどはカタカタ嫌な音が鳴ります。

Ordered 2 sets of these for my 2 GMMK Pro keyboards, as the stabs that come on those are very shoddy, sticky, and just not great. The durock stabs are great, easy to work with, and even include pads for dampening. One thing to note, all over the internet it states to use these on GMMK Pro with stock alum plate, you need to file the plate. On my white GMMK Pro, the Durock stabs were VERY tight to the plate, but i was ultimately able to carefully press them into the plate . There was a lot of friction, and it didn't feel great, but I was ultimately able to install these WITHOUT filing. On my black GMMK Pro, the durock stabs fit perfectly, with room to spare. I don't know if this is a variance in the stabs, or a variance in the plates, but I am pleased with the quality of the kits, and the stabs themselves are lightyears ahead of the GMMK stabs. I would recommend these to anyone looking to upgrade their GMMK Pro stabs.

Purchased two sets, unfortunately cannot recommend this product for the cost. Both sets wires were warped (badly unbalanced), and the tolerances between the stems and the housing have so much variance it leads to a large amount of inconsistency in keypress. No amount of 205g0/xht-bdz will fix this... If you can find these for 5-10$ ea, I feel they are probably worth that if you want to spend hours and have the equipment to balance stabilizer wires. Otherwise try TX or TX AP, more than double the quality and at less than half the price . Amazon has made this product extremely hard to return in Canada... Overall my experience with this could be described as a giant waste of time and money.