LISEN 15W MagSafe Car Mount Charger, Magnetic Phone Holders for Your Car

This is 100000000% the most reliable, durable, stable AMAZINGGG MagSafe accessory I have purchased! It really is a life saver and it won't break the bank either! Its incredibly straightforward and super easy to use/install, very easy to transport should you need to move vehicles etc. Also, the stability and durability of the magnet is UNREAL!!! Currently where I reside, they are doing construction for days so the roads are so bumpy they feel like a shopping cart rolling down a staircase, and my phone stays securely in place every time! I have no complaints abouts this product, the charging speed is also decent.. You get what you pay for... well usually, because this is a steal at their prices!

This has been working well. The magnet is strong and the adhesive hasn’t budged since I put it on a few weeks ago, even in the summer heat. I like that there are two options for where to attach the base. I’m not usually a fan of vent clips since they sometimes make it harder to direct air flow, but I tried it out and liked this one. The vent clip has a very good design. It’s not going to fall off easily, which my last phone holder did all of the time. It’s not difficult to take off of the vent when needed, either. That said, I still prefer the adhesive base. The charging function works well. How well it works depends on the cord and car adapter you use. I use the cord provided and a good quality adapter that works with this item, don’t remember the output off the top of my head but the output you need is listed somewhere in the product description. If your charger isn’t working, you should take a look at that first probably. The charging isn’t super fast but it does work. I like the glow, it’s not too bright so it’s not distracting. It reminds me of Tron. The picture I have is from when I was setting it up and testing out the vent clip. Not super great resolution since it was dark, but you can see the glow. The little nob on the top left of my dashboard is the adhesive base. Overall, good quality for the price.

I didn't have a ton of hope when I ordered this, but my car doesn't have CarPlay and I don't like needing to hold/touch my screen in the car (in addition to it being illegal in my state). My goal was to get something that would hold my phone where I could see my map easily and keep it from ending up in the floorboard. The charging feature was just a bonus. I fully expected to use the adhesive mount that comes with this charger, but the vent clip has been amazing. I attached it on a small vent by the driver's side door that doesn't have any swivel/tilt function and it locks in place very well. I also installed the adhesive, but it was difficult to find a place given the curve of my dash. The cord that came with the charger was too short, but I used a longer usb-c to usb-c cord that I already owned. The setup was just as simple and probably more forgiving than other mounts I've used. The most surprising thing was how well the charger actually holds my phone. The magnet is extremely strong. I live in a rural/suburban area and the roads aren't exactly well maintained. This thing has stood up to massive potholes, train tracks, and a handful of road trips across six states without dropping my phone once. It keeps it charged when I'm running music and navigation; there haven't been any issues with overheating while charging despite the handful of +100°F plus days we've had this year. I'm genuinely impressed with this phone holder and I'm probably getting a couple more as stocking stuffers for friends and family this year. It would also make a good gift for new drivers who don't have carplay to view navigation directions.

Update #2: I received an e-mail from Lisen in response to my inquiry. The rep said to make sure the charger that plugs into the cigarette lighter has a minimum 20W output. In review of the Samsung "Adaptive Fast Charger" I was using, nowhere on it does it state the output wattage. So I borrowed an Ainope 36W charger and tried it. This completely resolved the problem. With the 36W Ainope charger, the phone now charges on the Lisen magnet Qi mount with no issues. I see that the instructions supplied with the Lisen Qi mount charger do state that the output charger needs to be a minimum of 18W. Conclusion: The Samsung charger I was using has an output wattage of less than 18, causing it to be incompatible with the Lisen magnetic Qi charging mount. I suspect that many of the other reviewers who experienced this same problem were also trying to use output chargers that have less than 18W. I have updated my rating to 4 stars. Minus one star because at the time of my original review, Lisen's hyperlinks to both their "support" page and to their "contact us" page took me to their product sales page, which was a bit frustrating. Otherwise the response and service from Lisen was great. As both a phone car mount and a Qi charger, this product is highly recommended with the use of a compatible output charger. Many older vehicles have lower output USB ports that won't work, and many older cigarette lighter chargers do not have enough output wattage to work. Back when I purchased my previous phone, a Samsung S9 Plus that came with the cigarette lighter charger I was trying to use, 10W was considered to be a "Fast Charger," but that is not enough juice to support this Lisen Qi charger. Update #1: I see that other reviewers have had the identical problem I am having. I used the Lisen product support link on Amazon, which takes me to the Lisen website *product sales* page (not to a support page). While on the Lisen website, I found and clicked on the "support" hyperlink. It also takes me to the sales page, not to a support page. Then I clicked the "contact us" link, which also takes me to the same product sales page... not to a contact page. I found a support e-mail address on the product box and sent an e-mail describing the problem. In reference to my original post, the Lisen phone number I called is the one posted on Amazon. I got an answering machine and left a message with my phone number and requested a return call. We shall see how this plays out. While my phone is mounted to the Lisen wireless phone charger Model 2E778, which is connected to a Samsung Fast Charger plugged into my car cigarette lighter, the charging starts, goes into turbo charging mode, then the charging stops a second or two later, then this cycle repeats over and over again never ending. The Mount attaches securely to my car vent. The magnetic mount is strong. If I can get the charging function to work, this would be a good product. I am using a newly purchased Motorola Edge + 2023 with the circular magnet applied to the outside of a Poetic case. The Poetic case has only a thin clear piece of plastic film on the backside and the circle magnet is attached to the plastic film. There is no thick plastic case that the charging has to penetrate through. Troubleshooting steps taken: I used the Lisen supplied USB cable plugged directly into my phone and the car charger. Charging worked normally with no issues. I placed the phone (in the Poetic case with magnet installed) on two different non-magnetic Qi chargers in my home. Charging worked great on both without interruption. I slid the backside of the phone around on the Listen charger to make sure I have correctly located the circular magnet and confirmed the magnet is correctly positioned and installed. If the phone is moved up, down, right, or left, there is no charging connection. On the sweet spot where the magnet is installed, charging starts, but then cycles on and off repeatedly. I called the manufacturer and left a recorded message explaining the problem and requested a call back. I will update this review if the problem is resolved.

Great car charger and phone mount! I’m really happy with this car mount charger. It holds my phone securely while I’m driving, and the charging feature is super convenient. I love not having to constantly plug my phone in while I’m on the road. It was easy to install, stays in place, and the mount is adjustable, making it easy to see my phone without blocking my view. Definitely a great purchase for the price!

car mount! The magnetic connection is incredibly strong—it holds my heavy phone completely rock-solid without a single slip, even over severe speed bumps and uneven roads. The 15W wireless charging is fast and stays cool, keeping my battery topped off during long drives while using GPS navigation. What truly sets LISEN apart, though, is their absolute top-tier customer service. They go above and beyond for their customers. When I reached out with a quick question, their support team responded almost instantly with a friendly, helpful, and hassle-free solution. It is rare to find a brand that combines a high-quality product with this level of care and customer satisfaction. If you are looking for a reliable, MagSafe car mount backed by a company that truly stands behind their products, buy this one without hesitation. Highly recommended!

I have tried so many phone holders in my car and have had no luck until now. This phone holder is very sturdy, easily adjustable, and the magnet is really strong. I haven’t tried the air vent clip but the stick-on option has worked great for me. 10/10 would recommend!!

I absolutely love this car mount! I have an older vehicle without built-in navigation or Apple CarPlay, so this has been such a great upgrade. It keeps my phone securely positioned where I can easily see the screen for navigation while also charging it at the same time. It works so well and is incredibly convenient—I loved mine enough that I ended up buying another one for my husband! Definitely one of those purchases I wish I had made sooner. Highly recommend! ⭐️⭐️⭐️⭐️⭐️

good and strong when you use it as car holder

Excelente la carga no es muy rápida pero funciona bien...

The magnet pad area is very good, solid and efficient. I used it on the Mazda3 (2012) with the adhesive method. Using an iPhone 16 ProMax, which is heavy, I could adhere it to the right side of the console, and angle it for great access and visibility. Every time I snap the phone in place, and even though I use a compatible leather case, the attachment feels really solid. It has never failed, no matter the road condition and driving style. I can freely rotate the phone at 360 degrees. The adhesive is very strong. I had adhered it on the left side initially, then slowly removed it, deciding to try the right side instead... It still adheres very well, and is totally solid about 6 months in. No concern at all about the adhesive. This is a top product. The only thing that exceeds it is the high level of customer service I experienced (when I had questions about the placement of the product on the dash). The team is amazing, they clearly want to be the best at what they’re doing, and I think they succeed with their amazing line of innovative and quality in-vehicle phone holders.

جيد عدا ان الاسق ضعيف يجب شراء دبل فيس للتثبيت

Stabil und einfache zu installieren, sehr praktisch in der Anwendung