6-Tier Over The Door Pantry Organizer with Mesh Baskets, Adjustable & Stable Hanging Spice Rack for Kitchen, Bathroom, Bedroom, and Baby Essentials Storage

Well put together,very sturdy,tall shelves,plenty of space,easy assembly!! Best one I've found so far!

Simple assembly, sturdy all metal construction with large bins. Make sure you have at least 5.5” of clearance. Well made overall. The metal tabs that hook into the supports arrived bent. As other reviewers mentioned, the door hangers are too large and result in unnecessary movement.

We recently purchased and installed the 8 shelf storage rack in white (wanted the 10 shelf version but at the time we purchased it was only available in black). Our primary reason for purchase was to better organize our spices, and the unit has fulfilled that goal. Positives include additional storage created from unused space, relatively easy to install, adjustable shelf placement, and mesh shelves/baskets (less gaps for items to slip through). Less than positives include the over the door mounts are unsightly (so we altered ours), the unit moves around a lot even with the adhesive discs installed (so we added anchor screws), the top shelves being pretty high up (I have to use a step stool to access those), and to make room for taller items (like spice refills) we had to take out a shelf leaving only 7 (if we’d been able to purchase the 10 shelf version it wouldn’t have been as big of a deal to lose a shelf). We also had one shelf with a small hole through the mesh leaving sharp points (easily addressed by hammering the sharp points back in place, but handle with care). During installation we noticed slight variation in the width of the shelves/baskets - some were 15.25”, some were 15.50”, and some were 15.75”, but we were able to make them all work. For the price it’s a good storage option. It would’ve been great except for the extra steps needed to make it more secure and to address the protruding over the door hooks.

Good quality and easy to assemble. It’s the perfect for solution if you have a lot of items as it can hold a lot of products. You can adjust the shelves to your liking. It’s fits perfectly behind the door and isn’t too heavy.

I have a VERY small pantry and regret that building decision. So - I bought this on a whim. I watched a FB Reel where someone had one from the Container Store. I couldn’t find it but comments said it was expensive. So - I head to Amazon and I found this one. Read the reviews and took a chance. The one thing I read that I did NOT want to do was drill holes in my closet door and use the sticky things (that look like suction cups). I just don’t want to damage the door if I moved or if it just was not going to work. So - I tapped into some things I have done to hang things at school… Painters Tape and Velcro dots. So far it is working. I wished Command Hooks made circles because that would work so much better. And had I not started with velcro, I would have used command strips and cut them, but I was already in and kept going. However at the bottom it still had a ‘flap’ noise when I opened and closed the pantry door; so I very gently used a command strip at the bottom. We will see if all this keeps it from flapping. I wished the hooks over the door were adjustable, but they are not. So - now I’m gonna try and find something to make those books on the outside the door look a little less obvious and more attractive. One little negative - a couple of the shelve hooks were bent and I had to straighten it out. There was a little paint chipping, but it is inside a closet and not seen.

Overall, this item is pretty good, though I WISH the baskets had BACKS! Using this in a linen closet, and I've had to add supplemental holders for small items like toothbrushes, razor-blade cartridges, etc. (Having said that, it's way better than wide-spaced wire shelves like many of these units have!) I also discovered some issues related to inconsistent fit/tooling of some parts (about which the manufacturer was very responsive and sent replacements quickly). The combined "adhesive pads and screws" parts are fussy and a little difficult to work with, particularly if you have paneled doors as I do. More on that in a moment...and I PROMISE you will find some good "pro tips" below -- read on, and learn from my trials! As you can see in the pics, my unit had a significant gap between two of the "support arm" pieces, which I believe is related to inconsistent manufacturing on one (or both) of these parts. But as I said, the manufacturer was very kind and prompt in making this right. The support arms are screwed together by screws which are set into clear discs with peel-off backings that reveal adhesive underneath. They're VERY sticky, which is good -- unless you place them incorrectly, so I HIGHLY RECOMMEND using a level to be sure the arms are plumb. (I used a small level with a magnetic edge, so I could let it sit on the support arm "hands free" while I nudged it plumb. Then I used a piece of low-adhesion blue "painter's tape" to mark the outermost edge tangent of each disc. It's worth noting that you should install the "baskets" as you go, so that the arms aren't just plumb, but appropriately spaced.) TRUST ME: it's worth the extra effort, as a tiny error in spacing can multiply over the course of a long run. It would seem to me that the very bottom of the "arms" is the perfect spot for one more adhesive pad, but there aren't enough included to do this (and the way the bottom caps/plugs fit in, the bottom hole -- where the pad would go -- is obscured anyway). I used a couple little white Velcro tabs and they worked fine. Speaking of those adhesive pads, don't overtighten them! The way the screws are set into the discs/pads, the disc will rip away from the screws if you overtorque them. "Snug" is plenty. Other important points: 1. The width shown in the listing is that of the outer edges of the rails/support arms, NOT the width of the baskets. 2. Again, to my dismay, the baskets do NOT have backs on them; they rely on the door upon which they're installed to be the "back." This means that small items can and will slip behind them and fall down (especially if you have paneled doors like mine are), and it means that you can't easily remove a basket to reposition it if it's full, unless you're super careful (and tip it toward you slightly). 3. The over-door hooks are GIGANTIC and too large for most modern, standard doors. My home was built in 2006 and the doors are 1-3/8" thick, leaving me with about a half-inch gap on the outside of the door, between the door face and the hook. Some little clear or white vinyl "bumpers" can be installed help that situation, but I can't understand why they're so huge. Having two options, or something adjustable, would make more sense. Overall, after it's all put together and in place, this unit feels solid (those adhesive pads make a big difference, even though I was loath to use them because they are NOT coming off without ruining the finish of the door). A few of the little "clips" on the baskets were bent, but I carefully bent them back into place (though you obviously don't want to do that too much, or you'll weaken the metal; fortunately, it shouldn't be required more than once!). CAUTIONARY NOTES and ASSEMBLY PROCESS ADVICE: Back to the adhesive pads for a moment: they go on the back of the support arms, as they hold the arms together. When you assemble, be sure that you set aside the segments which are the plugged-end BOTTOM pieces, or you may have to redo some stuff. Then, hang the arms over the door, and place your baskets. It doesn't matter at this point where you put the baskets; you just need to get the width-spacing consistent. Next, align the arms so the unit is where you want it on the door (be aware of clearance for hinges, doorknobs, casings, etc.). THEN, get your level and nudge everything plumb as described above, because you MUST pull everything away from the door to remove the adhesive backing from the pads. A HELPER WILL MAKE THIS GO MUCH SMOOTHER. After everything's marked and triple-checked for accuracy, be sure that any "excess" overhang from the hooks is on the OTHER side of the door (i.e., not the side where the baskets are, because you want that tight to the door). Working from the top down, gently pull the arms away from the door and remove the peel-off backing from the discs/pads. You may want to remove the baskets, though there are pros and cons to doing so: they keep the width stable, but they can also get in the way. Your helper can keep everything pulled away from the door while you carefully press the pads into place (again, working from top-to-bottom). Then, replace any baskets you removed, and get to filling! Thanks for reading; I hope that my review helps you out!

I have one in my bathroom and absolutely love it. Holds all my products securely It was very easy to install and customize. I only wish I could order additional baskets without having to purchase another unit I want to install one on every closet door. Now I did order this one for my kitchen pantry, but I'm returning it only because the kitchen remodel allowed the use of biological doors. Overall it is a great product, and applical for so many uses. Kitchen, bathroom, garage, kids rooms, and my favorite would be my sewing room, (wall mounted).

Box was delivered in good shape. Fairly simple to assemble. Hubby had no issues. We ended up screwing it to our pantry door to keep it more stable. It’s lightweight. Some of the shelves needed the hook end bent back into place. We had 1 shelf left over because of our spacing. It holds what I wanted it to. Overall I’m satisfied with my purchase.

great item love it good quality